Jörn Glökler

Toward optimized antibody microarrays: a comparison of current microarray support materials

With the advent of protein and antibody microarray technology several different coatings and protocols have been published, which may be broadly divided into two types: gel-coated surfaces and plain non-gel-coated glass or plastic surfaces, some with chemical groups attached. We have screened 11 different array surfaces of both types and compared them with respect to their detection limit, inter- and intrachip variation, and storage characteristics. Five different antibodies were immobilized onto each type of microarray support, with total protein concentrations ranging from 40 fmol to 25 amol per spot. From these results, it was seen that some antibodies were more suited for use on antibody arrays. All measurements were performed in quadruplicate, and the results revealed high signal uniformity and reproducibility of most plain glass and plastic slides. Lower detection limits were obtained with polyacrylamide-coated slides, making them more suitable for the detection of very low concentrations of antigen. All microarray coatings could be stored for a period of 8 weeks; however, improved results were seen after 2 weeks of storage. In conclusion, the results indicate the need to test each antibody to be used on an antibody array and to select the microarray coating based on experimental requirements.

Next generation of protein microarray support materials:: Evaluation for protein and antibody microarray applications

The performance of protein and antibody microarrays is dependent on various factors, one of which is the use of an appropriate microarray surface for the immobilisation of either protein or antibody samples. We have investigated the properties of seven new surfaces in the context of both protein and antibody microarray technology. We have demonstrated the functionality of all new slide coatings and investigated the mean signal to spotted concentration ratio, determined detection limits and calculated coefficients of variation. Moreover, new concepts for slide coatings such as dendrimer and poly(ethylene glycol)-epoxy slides were evaluated and improved qualities of novel slide surfaces were observed. Optimal slide coatings for antibody and protein chips were proposed and the requirements for both technologies were discussed.

Probing the SELEX Process with Next-Generation Sequencing

Background SELEX is an iterative process in which highly diverse synthetic nucleic acid libraries are selected over many rounds to finally identify aptamers with desired properties. However, little is understood as how binders are enriched during the selection course. Next-generation sequencing offers the opportunity to open the black box and observe a large part of the population dynamics during the selection process. Methodology We have performed a semi-automated SELEX procedure on the model target streptavidin starting with a synthetic DNA oligonucleotide library and compared results obtained by the conventional analysis via cloning and Sanger sequencing with next-generation sequencing. In order to follow the population dynamics during the selection, pools from all selection rounds were barcoded and sequenced in parallel. Conclusions High affinity aptamers can be readily identified simply by copy number enrichment in the first selection rounds. Based on our results, we suggest a new selection scheme that avoids a high number of iterative selection rounds while reducing time, PCR bias, and artifacts.

Generation of High Density Protein Microarrays by Cell-free in Situ Expression of Unpurified PCR Products

Due to the success of DNA microarrays and the growing numbers of available protein expression clones, protein microarrays have become more and more popular for the high throughput screening of protein interactions. However, the widespread applicability of protein microarrays is currently hampered by the large effort associated with their production. Apart from the requirement for a protein expression library, expression and purification of the proteins themselves and the lacking stability of many proteins remain the bottleneck. Here we present an approach that allows the generation of high density protein microarrays from unbound DNA template molecules on the chip. It is based on the multiple spotting technique and comprises the deposition of a DNA template in a first spotting step and the transfer of a cell-free transcription and translation mixture on top of the same spot in a second spotting step. Using wild-type green fluorescent protein as a model protein, we demonstrated the time and template dependence of this coupled transcription and translation and showed that enough protein was produced to yield signals that were comparable to 300 μg/ml spotted protein. Plasmids as well as unpurified PCR products can be used as templates, and as little as 35 fg of PCR product (∼22,500 molecules) were sufficient for the detectable expression of full-length wild-type green fluorescent protein in subnanoliter volumes. We showed that both aminopropyltrimethoxysilane and nickel chelate surfaces can be used for capture of the newly synthesized proteins. Surprisingly we observed that nickel chelate-coated slides were binding the newly synthesized proteins in an unspecific manner. Finally we adapted the system to the high throughput expression of libraries by designing a single primer pair for the introduction of the required T7 promoter and demonstrated the in situ expression using 384 randomly chosen clones.

High-throughput protein arrays: prospects for molecular diagnostics

High-throughput protein arrays allow the miniaturized and parallel analysis of large numbers of diagnostic markers in complex samples. Using automated colony picking and gridding, cDNA or antibody libraries can be expressed and screened as clone arrays. Protein microarrays are constructed from recombinantly expressed, purified, and yet functional proteins, entailing a range of optimized expression systems. Antibody microarrays are becoming a robust format for expression profiling of whole genomes. Alternative systems, such as aptamer, PROfusion, nano- and microfluidic arrays are all at proof-of-concept stage. Differential protein profiles have been used as molecular diagnostics for cancer and autoimmune diseases and might ultimately be applied to screening of high-risk and general populations.

A streamlined protocol for emulsion polymerase chain reaction and subsequent purification.

Compartmentalization of polymerase chain reaction (PCR) reduces artifacts, especially when complex libraries are amplified. It allows clonal amplification of templates from complex mixtures in a bias-free manner. Here we describe a rapid, straightforward, and easy protocol for PCR in a water-in-oil emulsion (ePCR) including sample recovery by DNA purification. Furthermore, no special laboratory equipment is needed and inexpensive components are used. Therefore, our flexible protocol allows ePCR to be readily implemented in daily routine experiments for a broad range of applications.

Standardization and quality management in next-generation sequencing.

DNA sequencing continues to evolve quickly even after > 30 years. Many new platforms suddenly appeared and former established systems have vanished in almost the same manner. Since establishment of next-generation sequencing devices, this progress gains momentum due to the continually growing demand for higher throughput, lower costs and better quality of data. In consequence of this rapid development, standardized procedures and data formats as well as comprehensive quality management considerations are still scarce. Here, we listed and summarized current standardization efforts and quality management initiatives from companies, organizations and societies in form of published studies and ongoing projects. These comprise on the one hand quality documentation issues like technical notes, accreditation checklists and guidelines for validation of sequencing workflows. On the other hand, general standard proposals and quality metrics are developed and applied to the sequencing workflow steps with the main focus on upstream processes. Finally, certain standard developments for downstream pipeline data handling, processing and storage are discussed in brief. These standardization approaches represent a first basis for continuing work in order to prospectively implement next-generation sequencing in important areas such as clinical diagnostics, where reliable results and fast processing is crucial. Additionally, these efforts will exert a decisive influence on traceability and reproducibility of sequence data.

Semi-automated selection of DNA aptamers using magnetic particle handling

We have developed a semi-automatic selection procedure for DNA aptamers. Employing a robotic workstation for magnetic particle handling, this method allows for a fast, reproducible, and parallelized selection of DNA aptamers. The selection protocol is designed to provide high flexibility and versatility in terms of choice of buffers and reagents, as well as stringency of selection. Using this procedure, we have successfully isolated ligand-specific, high-affinity DNA aptamers.

Shining a light on LAMP assays' A comparison of LAMP visualization methods including the novel use of berberine

The need for simple and effective assays for detecting nucleic acids by isothermal amplification reactions has led to a great variety of end point and real-time monitoring methods. Here we tested direct and indirect methods to visualize the amplification of potato spindle tuber viroid (PSTVd) by loop-mediated isothermal amplification (LAMP) and compared features important for one-pot in-field applications. We compared the performance of magnesium pyrophosphate, hydroxynaphthol blue (HNB), calcein, SYBR Green I, EvaGreen, and berberine. All assays could be used to distinguish between positive and negative samples in visible or UV light. Precipitation of magnesium-pyrophosphate resulted in a turbid reaction solution. The use of HNB resulted in a color change from violet to blue, whereas calcein induced a change from orange to yellow-green. We also investigated berberine as a nucleic acid-specific dye that emits a fluorescence signal under UV light after a positive LAMP reaction. It has a comparable sensitivity to SYBR Green I and EvaGreen. Based on our results, an optimal detection method can be chosen easily for isothermal real-time or end point screening applications.

A calibrated diversity assay for nucleic acid libraries using DiStRO—a Diversity Standard of Random Oligonucleotides

We have determined diversities exceeding 1012 different sequences in an annealing and melting assay using synthetic randomized oligonucleotides as a standard. For such high diversities, the annealing kinetics differ from those observed for low diversities, favouring the remelting curve after annealing as the best indicator of complexity. Direct comparisons of nucleic acid pools obtained from an aptamer selection demonstrate that even highly complex populations can be evaluated by using DiStRO, without the need of complicated calculations.