Jose Ángel Pino-Chamorro

Water-Soluble Mo3S4 Clusters Bearing Hydroxypropyl Diphosphine Ligands: Synthesis, Crystal Structure, Aqueous Speciation, and Kinetics of Substitution Reactions

The [Mo(3)S(4)Cl(3)(dhprpe)(3)](+) (1(+)) cluster cation has been prepared by reaction between Mo(3)S(4)Cl(4)(PPh(3))(3) (solvent)(2) and the water-soluble 1,2-bis(bis(hydroxypropyl)phosphino)ethane (dhprpe, L) ligand. The crystal structure of [1](2)[Mo(6)Cl(14)] has been determined by X-ray diffraction methods and shows the typical incomplete cuboidal structure with a capping and three bridging sulfides. The octahedral coordination around each metal center is completed with a chlorine and two phosphorus atoms of the diphosphine ligand. Depending on the pH, the hydroxo group of the functionalized diphosphine can substitute the chloride ligands and coordinate to the cluster core to give new clusters with tridentate deprotonated dhprpe ligands of formula [Mo(3)S(4)(dhprpe-H)(3)](+) (2(+)). A detailed study based on stopped-flow, (31)P{(1)H} NMR, and electrospray ionization mass spectrometry techniques has been carried out to understand the behavior of acid-base equilibria and the kinetics of interconversion between the 1(+) and the 2(+) forms. Both conversion of 1(+) to 2(+) and its reverse process occur in a single kinetic step, so that reactions proceed at the three metal centers with statistically controlled kinetics. The values of the rate constants under different conditions are used to discuss on the mechanisms of opening and closing of the chelate rings with coordination or dissociation of chloride.

Influence of the Ligand Alkyl Chain Length on the Solubility, Aqueous Speciation, and Kinetics of Substitution Reactions of Water- Soluble M3S4 (M = Mo, W) Clusters Bearing Hydroxyalkyl Diphosphines

Water-soluble [M3S4X3(dhbupe)3](+) diphosphino complexes (dhbupe = 1,2-bis(bis(hydroxybutyl)phosphino)ethane), 1(+) (M = Mo, X = Cl) and 2(+) (M = W; X = Br), have been synthesized by extending the procedure used for the preparation of their hydroxypropyl analogues by reaction of the M3S4(PPh3)3X4(solvent)x molecular clusters with the corresponding 1,2-bis(bishydroxyalkyl)diphosphine. The solid state structure of the [M3S4X3(dhbupe)3](+) cation possesses a C3 symmetry with a cuboidal M3S4 unit, and the outer positions are occupied by one halogen and two phosphorus atoms of the diphosphine ligand. At a basic pH, the halide ligands are substituted by hydroxo groups to afford the corresponding [Mo3S4(OH)3(dhbupe)3](+) (1OH(+)) and [W3S4(OH)3(dhbupe)3](+) (2OH(+)) complexes. This behavior is similar to that found in 1,2-bis(bis(hydroxymethyl)phosphino)ethane (dhmpe) complexes and differs from that observed for 1,2-bis(bis(hydroxypropyl)phosphino)ethane (dhprpe) derivatives. In the latter case, an alkylhydroxo group of the functionalized diphosphine replaces the chlorine ligands to afford Mo3S4 complexes in which the deprotonated dhprpe acts in a tridentate fashion. Detailed studies based on stopped-flow, (31)P{(1)H} NMR, and electrospray ionization mass spectrometry techniques have been carried out in order to understand the solution behavior and kinetics of interconversion between the different species formed in solution: 1 and 1OH(+) or 2 and 2OH(+). On the basis of the kinetic results, a mechanism with two parallel reaction pathways involving water and OH(-) attacks is proposed for the formal substitution of halides by hydroxo ligands. On the other hand, reaction of the hydroxo clusters with HX acids occurs with protonation of the OH(-) ligands followed by substitution of coordinated water by X(-).

Synthesis and structure of trinuclear W3S4 clusters bearing aminophosphine ligands and their reactivity toward halides and pseudohalides.

The aminophosphine ligand (2-aminoethyl)diphenylphosphine (edpp) has been coordinated to the W3(μ-S)(μ-S)3 cluster unit to afford trimetallic complex [W3S4Br3(edpp)3](+) (1(+)) in a one-step synthesis process with high yields. Related [W3S4X3(edpp)3](+) clusters (X = F(-), Cl(-), NCS(-); 2(+)-4(+)) have been isolated by treating 1(+) with the corresponding halide or pseudohalide salt. The structure of complexes 1(+) to 4(+) contains an incomplete W3S4 cubane-type cluster unit, and only one of the possible isomers is formed: the one with the phosphorus atoms trans to the capping sulfur and the amino groups trans to the bridging sulphurs. The remaining coordination position on each metal is occupied by X. Detailed studies using stopped-flow, (31)P{(1)H} NMR, and ESI-MS have been carried out in order to understand the solution behavior and the kinetics of interconversion among species 1(+), 2(+), 3(+), and 4(+) in solution. Density functional theory (DFT) calculations have been also carried out on the reactions of cluster 1(+) with the different anions. The whole set of experimental and theoretical data indicate that the actual mechanism of substitutions in these clusters is strongly dependent on the nature of the leaving and entering anions. The interaction between an entering F(-) and the amino group coordinated to the adjacent metal have also been found to be especially relevant to the kinetics of these reactions.

Kinetic and DFT studies on the mechanism of C-S bond formation by alkyne addition to the [Mo3S4(H2O)9]4+ cluster.

Reaction of [Mo3(μ3-S)(μ-S)3] clusters with alkynes usually leads to formation of two C-S bonds between the alkyne and two of the bridging sulfides. The resulting compounds contain a bridging alkenedithiolate ligand, and the metal centers appear to play a passive role despite reactions at those sites being well illustrated for this kind of cluster. A detailed study including kinetic measurements and DFT calculations has been carried out to understand the mechanism of reaction of the [Mo3(μ3-S)(μ-S)3(H2O)9](4+) (1) cluster with two different alkynes, 2-butyne-1,4-diol and acetylenedicarboxylic acid. Stopped-flow experiments indicate that the reaction involves the appearance in a single kinetic step of a band at 855 or 875 nm, depending on the alkyne used, a position typical of clusters with two C-S bonds. The effects of the concentrations of the reagents, the acidity, and the reaction medium on the rate of reaction have been analyzed. DFT and TD-DFT calculations provide information on the nature of the product formed, its electronic spectrum and the energy profile for the reaction. The structure of the transition state indicates that the alkyne approaches the cluster in a lateral way and both C-S bonds are formed simultaneously.

Cycloaddition of alkynes to diimino Mo3S4 cubane-type clusters: a combined experimental and theoretical approach

A heterocyclic ligand 4,4′-di-tert-butyl-2,2′-bipyridine (dbbpy) has been coordinated to the Mo3S4 cluster unit affording the complex [Mo3S4Cl3(dbbpy)3]+ ([1]+) in a one-step ligand-exchange protocol from [Mo3S4(tu)8(H2O)]Cl4·4H2O (tu = thiourea). The new cluster was isolated as [1]PF6 and [1]Cl salts in high yields and the crystal structure of the latter determined by X-ray analysis. The synthetic procedure was extended to tungsten to afford [W3S4Cl3(dbbpy)3]+ ([2]+). Kinetic and NMR studies show that [1]+ reacts with several alkynes to form dithiolene species via concerted [3+2] cycloaddition reactions whereas [2]+ remains inert under similar conditions. The different rates for the reactions of [1]+ are rationalised by computational (DFT) calculations, which show that the more electron-withdrawing the substituents of the alkyne the faster the reaction. The inertness of [2]+ is due to the endergonicity of its reactions, which feature ΔGr values systematically 5–7 kcal mol−1 more positive than for those of [1]+.

Mechanism of [3+2] Cycloaddition of Alkynes to the [Mo3S4(acac)(3)(py)(3)][PF6] Cluster

A study, involving kinetic measurements on the stopped-flow and conventional UV/Vis timescales, ESI-MS, NMR spectroscopy and DFT calculations, has been carried out to understand the mechanism of the reaction of [Mo3 S4 (acac)3 (py)3 ][PF6 ] ([1]PF6 ; acac=acetylacetonate, py=pyridine) with two RCCR alkynes (R=CH2 OH (btd), COOH (adc)) in CH3 CN. Both reactions show polyphasic kinetics, but experimental and computational data indicate that alkyne activation occurs in a single kinetic step through a concerted mechanism similar to that of organic [3+2] cycloaddition reactions, in this case through the interaction with one Mo(μ-S)2 moiety of [1](+) . The rate of this step is three orders of magnitude faster for adc than that for btd, and the products initially formed evolve in subsequent steps into compounds that result from substitution of py ligands or from reorganization to give species with different structures. Activation strain analysis of the [3+2] cycloaddition step reveals that the deformation of the two reactants has a small contribution to the difference in the computed activation barriers, which is mainly associated with the change in the extent of their interaction at the transition-state structures. Subsequent frontier molecular orbital analysis shows that the carboxylic acid substituents on adc stabilize its HOMO and LUMO orbitals with respect to those on btd due to better electron-withdrawing properties. As a result, the frontier molecular orbitals of the cluster and alkyne become closer in energy; this allows a stronger interaction.