Juan Beltran-Huarac

L-cysteine capped ZnS:Mn quantum dots for room-temperature detection of dopamine with high sensitivity and selectivity

Dopamine (DA) is one of the most important catecholamine neurotransmitters of the human central nervous system, and is involved in many behavioral responses and brain functions. Below normal DA levels in biological fluids can lead to different neurodegenerative conditions. For excess DA levels, a failure in energy metabolism is indicated. In this study, a facile room-temperature phosphorescence sensor is developed to detect DA based on l-cysteine capped Mn doped ZnS quantum dots (l-cys ZnS:Mn QDs). The QDs display a prominent orange emission band peaking at ~598nm, which is strongly quenched upon addition of DA in alkaline medium. The sensor exhibits a linear working range of ~0.15-3.00μM, and a limit of detection of ~7.80nM. These results are explained in terms of a pH-dependent electron transfer process, in which the oxidized dopamine quinone functions as an efficient electron acceptor. The QDs-based sensor shows a high selectivity to DA over common interfering biomolecules (including some amino acids, ascorbic acid, chloride and glucose). The sensor has been successfully applied for the detection of DA in urine samples, yielding recoveries as high as 93%. Our findings indicate that our developed sensor exhibits high sensitivity and reproducibility to determine DA even in biological fluids where DA is at low levels, e.g., in the central nervous system, which is the usual clinical profile of a neurodegenerative disorder associated to the Parkinsons disease.

Single-crystal γ-MnS nanowires conformally coated with carbon.

We report for the first time the fabrication of single-crystal metastable manganese sulfide nanowires (γ-MnS NWs) conformally coated with graphitic carbon via chemical vapor deposition technique using a single-step route. Advanced spectroscopy and electron microscopy techniques were applied to elucidate the composition and structure of these NWs at the nanoscale, including Raman, XRD, SEM, HRTEM, EELS, EDS, and SAED. No evidence of α-MnS and β-MnS allotropes was found. The γ-MnS/C NWs have hexagonal cross-section and high aspect ratio (∼1000) on a large scale. The mechanical properties of individual γ-MnS/C NWs were examined via in situ uniaxial compression tests in a TEM-AFM. The results show that γ-MnS/C NWs are brittle with a Youngs modulus of 65 GPa. The growth mechanism proposed suggests that the bottom-up fabrication of γ-MnS/C NWs is governed by vapor-liquid-solid mechanism catalyzed by bimetallic Au-Ni nanoparticles. The electrochemical performance of γ-MnS/C NWs as an anode material in lithium-ion batteries indicates that they outperform the cycling stability of stable micro-sized α-MnS, with an initial capacity of 1036 mAh g(-1) and a reversible capacity exceeding 503 mAh g(-1) after 25 cycles. This research advances the integration of carbon materials and metal sulfide nanostructures, bringing forth new avenues for potential miniaturization strategies to fabricate 1D core/shell heterostructures with intriguing bifunctional properties that can be used as building blocks in nanodevices.

Stability of the Mn photoluminescence in bifunctional ZnS:0.05Mn nanoparticles

We investigate the stability of the orange band photoluminescence (PL) of bifunctional nanoparticles of Mn2+-doped ZnS at 5% (ZnS:0.05Mn). These 4-nm nanoparticles are synthesized via a one-step inorganic chemical route under ambient conditions. The phase, crystallinity, and morphology are analyzed via X-ray and electron diffractions and high-resolution electron microscopy. Based on the thermally activated carrier-transfer model, it is found that orange emission is rather stable at low temperatures and possesses thermal activation energy of ∼18 meV. The analysis of the PL decay curves suggests the coexistence of multiple lifetimes, that the shortening observed in PL lifetime is not due to the Mn2+ ions, and that the orange band decay is stable in temperature range from 10 K to 300 K. The measured M-H hysteresis loops demonstrate that ZnS:0.05Mn nanoparticles exhibit ferromagnetic ordering below 30 K, unlike its bulk counterpart. No magnetic field dependence of the Mn2+ PL intensity is observed up to 1 T. ...

Highly-crystalline γ-MnS nanosaws

We report here a straightforward method to fabricate single-crystal wurtzite-structured manganese sulfide nanosaws (γ-MnS NSs) via a chemical vapor deposition technique, which can be extended to different types of binary chalcogenide-based 1D building blocks. Advanced spectroscopy and electron microscopy techniques were applied to reveal the structure, morphology and composition of these nanostructures. Our studies indicate that γ-MnS NSs are of high crystalline quality and purity, exhibit high aspect ratio and have extrusive teeth with average tip size of approximately a couple of atoms. These NSs are structurally stable and do not present divergence in surface energy. The formation of the backsaw is governed by a vapor–liquid–solid growth mechanism, whereas the teeth are a result of a self-catalyzed growth process induced by the Mn-terminated (0001) surface. Our optical and electrochemical analyses indicate that γ-MnS NSs can be used as efficient visible light emitters with an activation energy of ∼40 meV, and as anode materials with improved cycling stability for LIBs. This bottom-up approach represents a step ahead to provide promising and potential Mn-based materials for high-performance LIB technology and optoelectronics, and adds a new member to the family of saw-like wurtzite-structured nanoribbons, such as CdSe and ZnS.

Physical properties of bifunctional BST/LSMO nanocomposites

We report the fabrication of bifunctional nanocomposites consisting of ferroelectric Ba0.7Sr0.3TiO3 (BST) and ferromagnetic La0.67Sr0.33MnO3 (LSMO) at different concentrations via a high-temperature solid state route. The structural, dielectric, electrical, magnetodielectric (MD), magnetoelectric (ME) and magnetic properties of BST/LSMO nanocomposites were systematically investigated over a wide range of temperatures and frequencies. The X-Ray Diffraction analyses reveal the nanocrystalline nature of the heterostructures, wherein both perovskite phases co-exist. No parasitic phases were observed. The study of the dielectric properties shows that the nanocomposites exhibit relaxor ferroelectric character, with ferroelectric-paraelectric phase transition temperatures around 287–292 K that do not follow the Curie-Weiss law. The electrical measurements indicate that ac conductivities of the nanocomposites follow the Jonschers universal power law, with activation energies of 0.42–0.63 eV based on Arrhenius-ty...

Novel magneto-luminescent effect in LSMO/ZnS:Mn nanocomposites at near-room temperature.

We report the tuning of the internal Mn photoluminescence (PL) transition of magnetically-ordered Sr-doped lanthanum manganite (LSMO)/Mn-doped zinc sulfide (ZnS:Mn) nanocomposites (NCs) by applying a static magnetic field in the range of 0-1 T below the critical temperature of ∼225 K. To do that, we have systematically fabricated LSMO/ZnS:Mn at different concentrations (1:1, 1:3, 1:5 and 1:10 wt%) via a straightforward solid-state reaction. X-ray diffraction and Raman analyses reveal that both phases coexist with a high degree of crystallinity and purity. Electron microscopy indicates that the NCs are almost spherical with an average crystal size of ∼6 nm, and that their surfaces are clean and smooth. The bifunctional character of LSMO/ZnS:Mn was evidenced by vibrating sample magnetometry and PL spectroscopy analyses, which show a marked ferromagnetic behavior and a broad, intense Mn orange emission band at room temperature. Moreover, the LSMO/ZnS:Mn at 1:3 wt% exhibits magneto-luminescent (ML) coupling below 225 K, and reaches the largest suppression of Mn-band PL intensity (up to ∼10%) at 150 K, when a magnetic field of 1.0 T is applied. The ML effect persists at magnetic fields as low as 0.2 T at 8 K, which can be explained by evoking a magnetic-ordering-induced spin-dependent restriction of the energy transfer to Mn states. No ML effect was observed in bare ZnS:Mn nanoparticles under the same experimental parameters. Our findings suggest that this NC can be considered as a new ML compound, similar to FeCo/InGaN-GaN and LSMO/ZnO NCs, useful as q-bits for quantum computation. The results presented here bring forth new avenues to better understand the interaction between semiconductors and perovskites, and exploit their synergistic effects in magneto-optics, spintronics and nanoelectronics.

Development of reference metal and metal oxide engineered nanomaterials for nanotoxicology research using high throughput and precision flame spray synthesis approaches

There is a growing need to develop and characterize reference metal and metal oxide engineered nanomaterials (ENMs) of high purity and tunable intrinsic properties suitable for nanotoxicology research. Here a high throughput (volume) and precision flame spray pyrolysis (FSP) approach coupled with state-of-the-art characterization techniques are utilized to generate such reference ENMs. The lab-based and industrially relevant FSP system, termed as Versatile Engineered Nanomaterials Generation System (VENGES), synthesizes the metals and metal oxides, at high throughput manner with controlled properties, such as primary particle size, aggregate diameter, shape, crystallinity, stoichiometry and surface chemistry. A nanopanel of nine reference ENMs (silica, silver, silver supported on silica, alumina, ceria and iron oxide) was synthesized and characterized using combined electron microscopy, advanced spectroscopic techniques and physical analyses (e.g., BET, XRD, TEM, pycnometry, XPS, ICP-MS and FTIR). ENMs show a high degree of chemical purity and stoichiometry, and low content of carbon residuals, and are sterile and free of bacteria and endotoxins. Further, their colloidal properties and their implication in in-vitro dosimetry have been also investigated in both environmental and test biological media. The suitability of reference ENMs and protocols developed in this study brings forth new arenas to generate reliable and reproducible toxicological data in an effort to reduce conflicting and contradicting inter-laboratory data on relative toxic effects of ENMs.

Effective delivery of sonication energy to fast settling and agglomerating nanomaterial suspensions for cellular studies: Implications for stability, particle kinetics, dosimetry and toxicity

Typical in vitro assays used for high throughput toxicological screening and measuring nano-bio interactions are conducted by pipetting suspensions of engineered nanomaterials (ENMs) dispersed in nutrient-rich culture media directly onto cells. In order to achieve fairly monodisperse and stable suspensions of small agglomerates, ultrasonic energy is usually applied to break apart large agglomerates that can form upon suspension in liquid. Lack of standardized protocols and methods for delivering sonication energy can introduce variability in the ENM suspension properties (e.g. agglomerate size, polydispersity, suspension stability over time), and holds significant implications for in vitro dosimetry, toxicity, and other nano-bio interactions. Careful assessment of particle transformations during dispersion preparation and sonication is therefore critical for accurate interpretation of in vitro toxicity studies. In this short communication, the difficulties of preparing stable suspensions of rapidly settling ENMs are presented. Furthermore, methods to optimize the delivery of the critical sonication energy required to break large agglomerates and prepare stable, fairly monodispersed suspensions of fast settling ENMs are presented. A methodology for the efficient delivery of sonication energy in a discrete manner is presented and validated using various rapidly agglomerating and settling ENMs. The implications of continuous vs. discrete sonication on average hydrodynamic diameter, and polydispersity was also assessed for both fast and slow settling ENMs. For the rapidly agglomerating and settling ENMs (Ag15%/SiO2, Ag and CeO2), the proposed discrete sonication achieved a significant reduction in the agglomerate diameter and polydispersity. In contrast, the relatively slow agglomerating and settling Fe2O3 suspension did not exhibit statistically significant differences in average hydrodynamic diameter or polydispersity between the continuous and discrete sonication approaches. Our results highlight the importance of using the proposed material-specific discrete sonication method to effectively deliver the critical sonication energy necessary to reproducibly achieve stable and fairly monodispersed suspensions that are suitable for in vitro toxicity testing.

Analysis of lipid adsorption on nanoparticles by nanoflow liquid chromatography-tandem mass spectrometry

Nanoparticles (NPs) tend to adsorb matrix molecules like proteins and lipids incubated with biological fluids, forming a biological corona. While the formation and functions of protein corona have been studied extensively, little attention has been paid to lipid adsorption on NPs. However, lipids are also abundantly present in biological fluids and play important roles in processes like cell signaling and angiogenesis. Therefore, in this study, we established the analytical procedure for study of lipid adsorption on three different types of NPs in two matrices: human serum and heavy cream, using nanoflow liquid chromatography-mass spectrometry (nanoflowLC-MS). Serum was chosen to represent the common environment the NPs would be present once entering human body, and heavy cream was the representative food matrix NPs may be added to improve the color or taste. Steps of liquid-liquid extraction were established and optimized to achieve maximum recovery of the adsorbed, standard lipids from the NPs. Then, the LC-MS/MS method was developed to attain base-line separation of the standard lipids that represent the major lipid classes. At last, the lipid adsorption profiles of the three NPs were compared. We found that the lipid adsorption profile on the same type of NP was significantly different between the two matrices. The established method will help us investigate lipid adsorption on additional NPs and reveal how it could be affected by the physiochemical properties of NPs and the presence of proteins and other components in the biological matrix.

Mussel-inspired 3D fiber scaffolds for heart-on-a-chip toxicity studies of engineered nanomaterials

AbstractDue to the unique physicochemical properties exhibited by materials with nanoscale dimensions, there is currently a continuous increase in the number of engineered nanomaterials (ENMs) used in consumer goods. However, several reports associate ENM exposure to negative health outcomes such as cardiovascular diseases. Therefore, understanding the pathological consequences of ENM exposure represents an important challenge, requiring model systems that can provide mechanistic insights across different levels of ENM-based toxicity. To achieve this, we developed a mussel-inspired 3D microphysiological system (MPS) to measure cardiac contractility in the presence of ENMs. While multiple cardiac MPS have been reported as alternatives to in vivo testing, most systems only partially recapitulate the native extracellular matrix (ECM) structure. Here, we show how adhesive and aligned polydopamine (PDA)/polycaprolactone (PCL) nanofiber can be used to emulate the 3D native ECM environment of the myocardium. Such nanofiber scaffolds can support the formation of anisotropic and contractile muscular tissues. By integrating these fibers in a cardiac MPS, we assessed the effects of TiO2 and Ag nanoparticles on the contractile function of cardiac tissues. We found that these ENMs decrease the contractile function of cardiac tissues through structural damage to tissue architecture. Furthermore, the MPS with embedded sensors herein presents a way to non-invasively monitor the effects of ENM on cardiac tissue contractility at different time points. These results demonstrate the utility of our MPS as an analytical platform for understanding the functional impacts of ENMs while providing a biomimetic microenvironment to in vitro cardiac tissue samples. Graphical AbstractHeart-on-a-chip integrated with mussel-inspired fiber scaffolds for a high-throughput toxicological assessment of engineered nanomaterials