Katherine A. Mazzio

Surface-Initiated Synthesis of Poly(3-methylthiophene) from Indium Tin Oxide and its Electrochemical Properties

Poly(3-methylthiophene) (P3MT) was synthesized directly from indium tin oxide (ITO) electrodes modified with a phosphonic acid initiator, using Kumada catalyst transfer polymerization (KCTP). This work represents the first time that polymer thickness has been controlled in a surface initiated KCTP reaction, highlighting the utility of KCTP in achieving controlled polymerizations. Polymer film thicknesses were regulated by the variation of the solution monomer concentration and ranged from 30 to 265 nm. Electrochemical oxidative doping of these films was used to manipulate their near surface composition and effective work function. Doped states of the P3MT film are maintained even after the sample is removed from solution and potential control confirming the robustness of the films. Such materials with controllable thicknesses and electronic properties have the potential to be useful as interlayer materials for organic electronic applications.

Oligoselenophene Derivatives Functionalized with a Diketopyrrolopyrrole Core for Molecular Bulk Heterojunction Solar Cells

Solution-processable oligoselenophenes functionalized with diketopyrrolopyrrole cores have been synthesized for use as the donor material in bulk heterojunction solar cells. The optical absorption of these materials extends to the edge of the visible spectrum. Power conversion efficiencies of 1.53 ± 0.04% for DPPS and 0.84 ± 0.04% for DPPDS were obtained under simulated 100 mW/cm(2) AM 1.5G irradiation for devices when PC(61)BM was used as an acceptor. DPPS showed hole mobilities of 4 × 10(-5) cm(2)/(V s) and a peak external quantum efficiency (EQE) of 25%, while DPPDS showed hole mobilities of 2 × 10(-5) cm(2)/(V s) and a peak EQE of 19%. To the best of our knowledge, these are the first oligoselenophenes that have been reported in molecular bulk heterojunction solar cells and this study could serve as a springboard for the design and optimization of high-performance selenophene-containing photovoltaics.

Orbital alignment at the internal interface of arylthiol functionalized CdSe molecular hybrids

Organic-inorganic nanoparticle molecular hybrid materials are interesting candidates for improving exciton separation in organic solar cells. The orbital alignment at the internal interface of cadmium selenide (ArS-CdSe) hybrid materials functionalized with covalently attached arylthiolate moieties was investigated through X-ray photoemission spectroscopy (XPS) and ultraviolet photoemission spectroscopy (UPS). A physisorbed interface between arylthiol (ArSH) ligands and CdSe nanoparticles was also investigated for comparison. This interface was created via a multi-step thin film deposition procedure in-vacuo, where the surface was characterized after each experimental step. This enabled the direct comparison of ArSH/CdSe interfaces produced via physisorption and ArS-CdSe covalently attached hybrid materials, which rely on a chemical reaction for their synthesis. All material depositions were performed using an electrospray deposition, which enabled the direct injection of solution-originating molecular species into the vacuum system. This method allows XPS and UPS measurements to be performed immediately after deposition without exposure to the atmosphere. Transmission electron microscopy was used to determine the morphology and particle size of the deposited materials. Ultraviolet-visible spectroscopy was used to estimate the optical band gap of the CdSe nanoparticles and the HOMO-LUMO gap of the ArSH ligands. These experiments showed that hybridization via covalent bonds results in an orbital realignment at the ArSH/CdSe interface in comparison to the physisorbed interface. The orbital alignment within the hybrid caused a favorable electron injection barrier, which likely facilitates exciton-dissociation while preventing charge-recombination.

End-functionalized semiconducting polymers as reagents in the synthesis of hybrid II-VI nanoparticles

The functionalization of II-VI nanocrystals with semiconducting polymers is of fundamental interest for lightweight, solution-processed optoelectronics. The direct surface functionalization of nanocrystals is useful for facilitating charge transfer across the donor/acceptor interface, in addition to promoting good mixing properties and thereby helping prevent nanoparticle aggregation. In this work, we develop a new method for the direct attachment of semiconducting polymers to II-VI inorganic nanocrystals, where the polymer plays a dual role, acting as both the desired capping agent and a chalcogenide monomer during synthesis. The success of this hybridization procedure relies on the establishment of a new polymer end-functionalization scheme, where a route toward a thio-phosphonate polymer end-group is developed; this end-group resembles many chalcogenide precursor materials used in the synthesis of II-VI nanomaterials. We show the applicability of this hybrid functionalization procedure by attaching poly(3-hexylthiophene-2,5-diyl) to CdSe and CdS. We followed the progress of the reaction by NMR and used transmission electron microscopy to determine the morphology of the resulting materials, which we found to have narrow size distributions after hybridization. Polymer attachment to the nanocrystals was confirmed by examining the steady-state and time-resolved optical properties of the hybrid materials, which also provided an insight into excited-state processes occurring across the hybrid interface.

Synthesis of Ligand-free CdS Nanoparticles within a Sulfur Copolymer Matrix

Aliphatic ligands are typically used during the synthesis of nanoparticles to help mediate their growth in addition to operating as high-temperature solvents. These coordinating ligands help solubilize and stabilize the nanoparticles while in solution, and can influence the resulting size and reactivity of the nanoparticles during their formation. Despite the ubiquity of using ligands during synthesis, the presence of aliphatic ligands on the nanoparticle surface can result in a number of problems during the end use of the nanoparticles, necessitating further ligand stripping or ligand exchange procedures. We have developed a way to synthesize cadmium sulfide (CdS) nanoparticles using a unique sulfur copolymer. This sulfur copolymer is primarily composed of elemental sulfur, which is a cheap and abundant material. The sulfur copolymer has the advantages of operating both as a high temperature solvent and as a sulfur source, which can react with a cadmium precursor during nanoparticle synthesis, resulting in the generation of ligand free CdS. During the reaction, only some of the copolymer is consumed to produce CdS, while the rest remains in the polymeric state, thereby producing a nanocomposite material. Once the reaction is finished, the copolymer stabilizes the nanoparticles within a solid polymeric matrix. The copolymer can then be removed before the nanoparticles are used, which produces nanoparticles that do not have organic coordinating ligands. This nascent synthesis technique presents a method to produce metal-sulfide nanoparticles for a wide variety of applications where the presence of organic ligands is not desired.