Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Kazuma Kuroki is active.

Publication


Featured researches published by Kazuma Kuroki.


Welding International | 2017

Heat dissipative Pb-free bonding technology using Al-rich Zn/Al/Zn clad solder

Takuto Yamaguchi; Tomotake Tohei; Osamu Ikeda; Shohei Hata; Yuichi Oda; Kazuma Kuroki; Hiromitsu Kuroda; Akio Hirose

Abstract Al-rich Zn/Al/Zn clad solder were developed as Pb-free solder for a die-attachment. The Zn/Al/Zn clad solder was produced by clad rolling of Zn and Al strips in order to prevent Al from oxidation and improve wettability. The Zn/Al/Zn clad solder was melted at 382°C after solid-state interdiffusion of the Zn and Al layers. Bonding was successfully achieved with bonding pressure of a few kilopascals. Thermal cycle life of Invar-to-Cu substrate joint using the Zn/Al/Zn clad solder was longer than that of Pb-Sn-Ag solder. No Kirkendall voids were observed in the vicinity of the bonded interface after ageing at 250 °C for 1000 h.


Archive | 2006

Copper alloy conductor, and trolley wire and cable using same, and copper alloy conductor fabrication method

Hiromitsu Kuroda; Kazuma Kuroki; Seigi Aoyama; Hiroyoshi Hiruta


Archive | 2007

Compound conductor and cable for cabling using it

Hiromitsu Kuroda; Kazuma Kuroki; Takeyoshi Taki; 毅義 滝; 一真 黒木; 洋光 黒田


Archive | 2005

Brazing clad material, and brazing method and brazing product using the same

Hideyuki Sagawa; Hiromitsu Kuroda; Kazuma Kuroki; Humio Horii; Tetsuya Tokumitu; Nobuhito Sakuyama; Shigeru Okamoto


Archive | 2011

Junction material, manufacturing method thereof, and manufacturing method of junction structure

Takuto Yamaguchi; Masahide Okamoto; Osamu Ikeda; Hiromitsu Kuroda; Kazuma Kuroki; Shohei Hata; Yuichi Oda


Archive | 2009

Low thermal expansion type composite heat sink and method of manufacturing the same

Masahiro Kiyofuji; Kazuma Kuroki; Kazuhiko Nakagawa; 和彦 中川; 雅宏 清藤; 一真 黒木


Archive | 2005

Brazing composite material and brazed product using the same

Kazuma Kuroki; Hiromitsu Kuroda; Hideyuki Sagawa; Sumio Shirai


Archive | 2011

Junction material, method for manufacturing the same, and method for manufacturing junction structure

Shohei Hata; Yasushi Ikeda; Hiromitsu Kuroda; Kazuma Kuroki; Yuichi Oda; Masahide Okamoto; Takuto Yamaguchi; 祐一 小田; 拓人 山口; 正英 岡本; 靖 池田; 昌平 秦; 一真 黒木; 洋光 黒田


Archive | 2009

Terminal, and method of connecting terminal and electric wire

Toshiyuki Horikoshi; Hiromitsu Kuroda; Kazuma Kuroki; Hideyuki Sagawa; Toru Washimi; 英之 佐川; 稔之 堀越; 亨 鷲見; 一真 黒木; 洋光 黒田


Journal of Electronic Materials | 2015

Three-Layer Zn/Al/Zn Clad Solder for Die Attachment

Takuto Yamaguchi; Osamu Ikeda; Yuichi Oda; Shohei Hata; Kazuma Kuroki; Hiromitsu Kuroda; Akio Hirose

Collaboration


Dive into the Kazuma Kuroki's collaboration.

Researchain Logo
Decentralizing Knowledge