Kilian Mergenthaler

Probing the Wurtzite Conduction Band Structure Using State Filling in Highly Doped InP Nanowires.

We have grown InP nanowires doped with hydrogen sulfide, which exhibit sulfur concentrations of up to 1.4%. The highest doped nanowires show a pure wurtzite crystal structure, in contrast to bulk InP which has the zinc blende structure. The nanowires display photoluminescence which is strongly blue shifted compared with the band gap, well into the visible range. We find evidence of a second conduction band minimum at the gamma point about 0.23 eV above the band edge, in excellent agreement with recent theoretical predictions. Electrical measurements show high conductivity and breakdown currents of 10(7) A/cm(2).

A new route toward semiconductor nanospintronics: highly Mn-doped GaAs nanowires realized by ion-implantation under dynamic annealing conditions.

We report on highly Mn-doped GaAs nanowires (NWs) of high crystalline quality fabricated by ion beam implantation, a technique that allows doping concentrations beyond the equilibrium solubility limit. We studied two approaches for the preparation of Mn-doped GaAs NWs: First, ion implantation at room temperature with subsequent annealing resulted in polycrystalline NWs and phase segregation of MnAs and GaAs. The second approach was ion implantation at elevated temperatures. In this case, the single-crystallinity of the GaAs NWs was maintained, and crystalline, highly Mn-doped GaAs NWs were obtained. The electrical resistance of such NWs dropped with increasing temperature (activation energy about 70 meV). Corresponding magnetoresistance measurements showed a decrease at low temperatures, indicating paramagnetism. Our findings suggest possibilities for future applications where dense arrays of GaMnAs nanowires may be used as a new kind of magnetic material system.

GaAs/AlGaAs heterostructure nanowires studied by cathodoluminescence

In this report we explore the structural and optical properties of GaAs/AlGaAs heterostructure nanowires grown by metalorganic vapour phase epitaxy using gold seed-particles. The optical studies were done by low-temperature cathodoluminescence (CL) in a scanning electron microscope (SEM). We perform a systematic investigation of how the nanowire growth-temperature affects the total photon emission, and variations in the emission energy and intensity along the length of the nanowires. The morphology and crystal structures of the nanowires were investigated using SEM and transmission electron microscopy (TEM). In order to correlate specific photon emission characteristics with variations in the nanowire crystal structure directly, TEM and spatially resolved CL measurements were performed on the same individual nanowires. We found that the main emission energy was located at around 1.48 eV, and that the emission intensity was greatly enhanced when increasing the GaAs nanowire core growth temperature. The data strongly suggests that this emission energy is related to rotational twins in the GaAs nanowire core. Our measurements also show that radial overgrowth by GaAs on the GaAs nanowire core can have a deteriorating effect on the optical quality of the nanowires. Finally, we conclude that an in situ pre-growth annealing step at a sufficiently high temperature significantly improves the optical quality of the nanowires.

Carrier Recombination Dynamics in Sulfur-Doped InP Nanowires

Measuring lifetime of photogenerated charges in semiconductor nanowires (NW) is important for understanding light-induced processes in these materials and is relevant for their photovoltaic and photodetector applications. In this paper, we investigate the dynamics of photogenerated charge carriers in a series of as-grown InP NW with different levels of sulfur (S) doping. We observe that photoluminescence (PL) decay time as well as integrated PL intensity decreases with increasing S doping. We attribute these observations to hole trapping with the trap density increased due to S-doping level followed by nonradiative recombination of trapped charges. This assignment is proven by observation of the trap saturation in three independent experiments: via excitation power and repetition rate PL lifetime dependencies and by PL pump-probe experiment.

Single GaInP nanowire p-i-n junctions near the direct to indirect bandgap crossover point

Axially defined GaInP single nanowire (NW) p-i-n junctions are demonstrated, with photocurrent response and yellow-green electroluminescence near the indirect bandgap crossover point at 2.18 eV (569 nm). We use DEZn and H2S as p- and n-type dopants, and find that they both affect the material composition and the crystal structure. The photovoltaic efficiency is comparable to single NW devices from binary III-V materials. These results demonstrate the potential of GaInP nanowires as a high-bandgap material for multijunction solar cells and light-emitting devices in the visible regime.

GaAsP Nanowires Grown by Aerotaxy

We have grown GaAsP nanowires with high optical and structural quality by Aerotaxy, a new continuous gas phase mass production process to grow III-V semiconductor based nanowires. By varying the PH3/AsH3 ratio and growth temperature, size selected GaAs1-xPx nanowires (80 nm diameter) with pure zinc-blende structure and with direct band gap energies ranging from 1.42 to 1.90 eV (at 300 K), (i.e., 0 ≤ x ≤ 0.43) were grown, which is the energy range needed for creating tandem III-V solar cells on silicon. The phosphorus content in the NWs is shown to be controlled by both growth temperature and input gas phase ratio. The distribution of P in the wires is uniform over the length of the wires and among the wires. This proves the feasibility of growing GaAsP nanowires by Aerotaxy and results indicate that it is a generic process that can be applied to the growth of other III-V semiconductor based ternary nanowires.

Semiconductor-Oxide Heterostructured Nanowires Using Postgrowth Oxidation.

Semiconductor-oxide heterointerfaces have several electron volts high-charge carrier potential barriers, which may enable devices utilizing quantum confinement at room temperature. While a single heterointerface is easily formed by oxide deposition on a crystalline semiconductor, as in MOS transistors, the amorphous structure of most oxides inhibits epitaxy of a second semiconductor layer. Here, we overcome this limitation by separating epitaxy from oxidation, using postgrowth oxidation of AlP segments to create axial and core-shell semiconductor-oxide heterostructured nanowires. Complete epitaxial AlP-InP nanowire structures were first grown in an oxygen-free environment. Subsequent exposure to air converted the AlP segments into amorphous aluminum oxide segments, leaving isolated InP segments in an oxide matrix. InP quantum dots formed on the nanowire sidewalls exhibit room temperature photoluminescence with small line widths (down to 15 meV) and high intensity. This optical performance, together with the control of heterostructure segment length, diameter, and position, opens up for optoelectrical applications at room temperature.

Recombination dynamics in aerotaxy-grown Zn-doped GaAs nanowires

In this paper we have investigated the dynamics of photo-generated charge carriers in a series of aerotaxy-grown GaAs nanowires (NWs) with different levels of Zn doping. Time-resolved photo-induced luminescence and transient absorption have been employed to investigate radiative (band edge transition) and non-radiative charge recombination processes, respectively. We find that the photo-luminescence (PL) lifetime of intrinsic GaAs NWs is significantly increased after growing an AlGaAs shell over them, indicating that an AlGaAs shell can effectively passivate the surface of aerotaxy-grown GaAs NWs. We observe that PL decay time as well as PL intensity decrease with increasing Zn doping, which can be attributed to thermally activated electron trapping with the trap density increased due to the Zn doping level.

Large-energy-shift photon upconversion in degenerately doped InP nanowires by direct excitation into the electron gas

AbstractRealizing photon upconversion in nanostructures is important for many next-generation applications such as biological labelling, infrared detectors and solar cells. In particular nanowires are attractive for optoelectronics because they can easily be electrically contacted. Here we demonstrate photon upconversion with a large energy shift in highly n-doped InP nanowires. Crucially, the mechanism responsible for the upconversion in our system does not rely on multi-photon absorption via intermediate states, thus eliminating the need for high photon fluxes to achieve upconversion. The demonstrated upconversion paves the way for utilizing nanowires—with their inherent flexibility such as electrical contactability and the ability to position individual nanowires—for photon upconversion devices also at low photon fluxes, possibly down to the single photon level in optimised structures.

Photon upconversion in degenerately sulfur doped InP nanowires

Radiative recombination in degenerately n-doped InP nanowires is studied for excitation above and below the Fermi energy of the electron gas, using photoluminescence. Laser-induced electron heating is observed, which allows absorption below the Fermi energy. We observe photon upconversion where photo-excited holes recombine with high |k| electrons. This can be attributed to hole scattering to high |k|-values, and the temperature dependence of this process is measured. We show that hole relaxation via phonon scattering can be observed in continuous wave excitation luminescence measurements.