Krunoslav Užarević

In situ X-ray diffraction monitoring of a mechanochemical reaction reveals a unique topology metal-organic framework.

Chemical and physical transformations by milling are attracting enormous interest for their ability to access new materials and clean reactivity, and are central to a number of core industries, from mineral processing to pharmaceutical manufacturing. While continuous mechanical stress during milling is thought to create an environment supporting nonconventional reactivity and exotic intermediates, such speculations have remained without proof. Here we use in situ, real-time powder X-ray diffraction monitoring to discover and capture a metastable, novel-topology intermediate of a mechanochemical transformation. Monitoring the mechanochemical synthesis of an archetypal metal-organic framework ZIF-8 by in situ powder X-ray diffraction reveals unexpected amorphization, and on further milling recrystallization into a non-porous material via a metastable intermediate based on a previously unreported topology, herein named katsenite (kat). The discovery of this phase and topology provides direct evidence that milling transformations can involve short-lived, structurally unusual phases not yet accessed by conventional chemistry.

Laboratory Real‐Time and In Situ Monitoring of Mechanochemical Milling Reactions by Raman Spectroscopy

Mechanistic understanding of mechanochemical reactions is sparse and has been acquired mostly by stepwise ex situ analysis. We describe herein an unprecedented laboratory technique to monitor the course of mechanochemical transformations at the molecular level in situ and in real time by using Raman spectroscopy. The technique, in which translucent milling vessels are used that enable the collection of a Raman scattering signal from the sample as it is being milled, was validated on mechanochemical reactions to form coordination polymers and organic cocrystals. The technique enabled the assessment of the reaction dynamics and course under different reaction conditions as well as, for the first time, direct insight into the behavior of liquid additives during liquid-assisted grinding.

Mechanochemical and solvent-free assembly of zirconium-based metal–organic frameworks

Mechanochemistry and accelerated aging are new routes to zirconium metal–organic frameworks, yielding UiO-66 and catalytically active UiO-66-NH2 accessible on the gram scale through mild solid-state self-assembly, without strong acids, high temperatures or excess reactants.

Real-Time and In Situ Monitoring of Mechanochemical Reactions: A New Playground for All Chemists

We provide a brief overview of the first techniques for direct, real-time observation of mechanochemical reactions by milling. Whereas mechanisms and kinetics of solid-state reactions induced by temperature or pressure have been extensively investigated, transformations of materials under continuous impact in a milling assembly remain largely unexplored and based on ex situ studies. The recent introduction and development of techniques for in situ monitoring of milling reactions by synchrotron X-ray powder diffraction and Raman spectroscopy has enabled the first direct insight into milling mechanochemistry, opening a new area for studies of chemical reactivity. So far, these techniques have revealed rapid, multistep reaction mechanisms and metastable intermediates that are impossible or difficult to observe or isolate in solution and have highlighted shortcomings of ex situ mechanistic studies. These pioneering advances also highlight the low level of mechanistic understanding and future challenges in developing a clear mechanistic picture of physicochemical transformations by milling.

Dynamic Molecular Recognition in Solid State for Separating Mixtures of Isomeric Dicarboxylic Acids

Molecular recognition emerges from non-covalent interactions and is of paramount importance for understanding of biological processes, ranging from enzymatic activity to DNA base pairing, as well as in the design of functional supramolecular systems, for example, molecular motors, sensors, ion receptors, or systems used in waste management. In the specific area of selective anion binding, numerous anion receptors (hosts) and sensors have been developed. The study of anion binding has traditionally been performed in solution where the host often experiences conformational freedom to form complexes with a wide range of guests. However, selectivity in separation has usually been achieved only upon crystallization, emphasizing the importance of intermolecular interactions in rigid crystal environment which lock the conformation of the host giving rise to its selectivity. In this context, recent advances in chemical reactivity achieved using mechanochemistry indicate that the concepts of supramolecular chemistry, such as templating, may be applicable also to solvent-free reactions. Mechanochemical reactivity can be highly dynamic and has thus far been employed for solid-state differentiation between enantiomers, supramolecular metathesis reactions, and for thermodynamic product selection. Although these reactions show specific interaction patterns between molecules comprising their respective solid phases, the possibility of selective binding and separation of target guest molecules from solid mixtures is, besides the pioneering studies by Etter and Caira, still an unexplored area. Here we focus on recognition and separation of isomeric or geometrically similar dicarboxylic acids (Scheme 1) from either their solid or solution mixtures using principles of supramolecular chemistry. The chosen acids belong to a class of guests of high biological and industrial relevance, and a considerable effort has been put into developing their sensors and receptors. Typically, the receptor for each dicarboxylate had to be meticulously designed because of the specific geometry of each acid molecule and their differing physicochemical properties. The importance of separation of the maleic/fumaric acid (H2mal/H2fum) stereoisomeric pair is not only related to the specific diastereomer recognition, but also arises from their conflicting biochemical behavior and abundant use of H2fum in food and pharmaceutical industry. We show here that the flexible polyamine receptor L (Scheme 1) discriminates among H2mal/H2fum diastereomers, succinic acid (H2suc), and three isomers of benzenedicarboxylic acid, by adapting its conformation and finally forming different solid hydrogenbonded (HB) frameworks. Regardless of whether the recognition takes place in the solid state by milling or by crystallization from solution, the resulting supramolecular complexes are the same and the selectivity bias of L towards the guest acids is fully retained. Milling improved yields to quantitative and almost eliminated the use of solvent. L proved to be an exceptional receptor for H2mal, also on the gram scale, excluding it from solid mixtures with even five other acids or from mixtures where there is a large surplus of a competing acid. Reacting L and H2mal in methanol (MeOH) or ethanol (EtOH) solutions yielded isoskeletal solvated solids, 1a (Table 1 and Section S.2 in the Supporting Information), Scheme 1. Dicarboxylic acids and the polyamine host L. The host binds anions as a cation (HL) resulting from protonation of the central amino group.

In Situ Monitoring and Mechanism of the Mechanochemical Formation of a Microporous MOF-74 Framework

Mechanochemistry provides a rapid, efficient route to metal-organic framework Zn-MOF-74 directly from a metal oxide and without bulk solvent. In situ synchrotron X-ray diffraction monitoring of the reaction course reveals two new phases and an unusual stepwise process in which a close-packed intermediate reacts to form the open framework. The reaction can be performed on a gram scale to yield a highly porous material after activation.

Desmotropy, Polymorphism, and Solid-State Proton Transfer: Four Solid Forms of an Aromatic o-Hydroxy Schiff Base

The Schiff base derived from salicylaldehyde and 2-amino-3-hydroxypyridine affords a diversity of solid forms, two polymorphic pairs of the enol-imino (D1 a and D1 b) and keto-amino (D2 a and D2 b) desmotropes. The isolated phases, identified by IR spectroscopy, X-ray crystallography, and (13)C cross-polarization/magnetic angle spinning (CP/MAS) NMR spectroscopy, display essentially planar molecular conformations characterized by strong intramolecular hydrogen bonds of the O-H⋅⋅⋅N (D1) or N-H⋅⋅⋅O (D2) type. A change in the position of the proton within this O⋅⋅⋅H⋅⋅⋅N system is accompanied by substantially different molecular conformations and, subsequently, by divergent supramolecular architectures. The appearance and interconversion conditions for each of the four phases have been established on the basis of a number of solution and solvent-free experiments, and evaluated against the results of computational studies. Solid phases readily convert into the most stable form (D1 a) upon exposure to methanol vapor, heating, or by mechanical treatment, and these transformations are accompanied by a change in the color of the sample. The course of thermally induced transformations has been monitored in detail by means of temperature-resolved powder X-ray diffraction and infrared spectroscopy. Upon dissolution, all forms equilibrate immediately, as confirmed by NMR and UV/Vis spectroscopy in several solvents, with the equilibrium shifted far towards the enol tautomer. This study reveals the significance of peripheral groups in the stabilization of metastable tautomers in the solid state.

Supramolecular stabilization of metastable tautomers in solution and the solid state.

This work presents a successful application of a recently reported supramolecular strategy for stabilization of metastable tautomers in cocrystals to monocomponent, non-heterocyclic, tautomeric solids. Quantum-chemical computations and solution studies show that the investigated Schiff base molecule, derived from 3-methoxysalicylaldehyde and 2-amino-3-hydroxypyridine (ap), is far more stable as the enol tautomer. In the solid state, however, in all three obtained polymorphic forms it exists solely as the keto tautomer, in each case stabilized by an unexpected hydrogen-bonding pattern. Computations have shown that hydrogen bonding of the investigated Schiff base with suitable molecules shifts the tautomeric equilibrium to the less stable keto form. The extremes to which supramolecular stabilization can lead are demonstrated by the two polymorphs of molecular complexes of the Schiff base with ap. The molecules of both constituents of molecular complexes are present as metastable tautomers (keto anion and protonated pyridine, respectively), which stabilize each other through a very strong hydrogen bond. All the obtained solid forms proved stable in various solid-state and solvent-mediated methods used to establish their relative thermodynamic stabilities and possible interconversion conditions.

Thermodynamic study of dihydrogen phosphate dimerisation and complexation with novel urea- and thiourea-based receptors.

Complexation of dihydrogen phosphate by novel thiourea and urea receptors in acetonitrile and dimethyl sulfoxide was studied in detail by an integrated approach by using several methods (isothermal titration calorimetry, ESI-MS, and (1)H NMR and UV spectroscopy). Thermodynamic investigations into H2PO4(-) dimerisation, which is a process that has been frequently recognised, but rarely quantitatively described, were carried out as well. The corresponding equilibrium was taken into account in the anion-binding studies, which enabled reliable determination of the complexation thermodynamic quantities. In both solvents the thiourea derivatives exhibited considerably higher binding affinities with respect to those containing the urea moiety. In acetonitrile, 1:1 and 2:1 (anion/receptor) complexes formed, whereas in dimethyl sulfoxide only the significantly less stable complexes of 1:1 stoichiometry were detected. The solvent effects on the thermodynamic parameters of dihydrogen phosphate dimerisation and complexation reactions are discussed.

Mechanosensitive metal–ligand bonds in the design of new coordination compounds

This article describes the selective cleavage of coordination bonds by mechanochemical methods and the further application of the thus obtained precursors for a facile preparation of new coordination compounds. In the class of dioxomolybdenum(VI) coordination compounds, [MoO2L(ROH)], where L stands for a tridentate dianionic ONO ligand and ROH represents different alcohol molecules, mechanical treatment induces an exclusive cleavage of the molybdenum–alcohol bond, which can thus be considered as a mechanosensitive bond. Alcohol removal can also be accomplished by heating. Both grinding and heating resulted in highly reactive, coordinatively unsaturated compounds, an orange amorphous pentacoordinated [MoO2L] (I) and the brown polymeric [MoO2L]n ((I)nnn), respectively. Even though both I and (I)nn are stable at room temperature, they can be interconverted using only solvent-free techniques, a conversion followed by a colour change of the sample. The tendency of such unsaturated complexes to complete their coordination spheres was exploited for the efficient solution and solvent-free syntheses of octahedral molybdenum complexes with selected O- and N-donating ligands. Both approaches herein used, solution and solvent-free, have proved to be superior under specific conditions and their respective advantages and weaknesses are discussed.