Kwan Hyung Cho

A novel solid dispersion system for natural product-loaded medicine: silymarin-loaded solid dispersion with enhanced oral bioavailability and hepatoprotective activity

Abstract A surface-attached silymarin-loaded solid dispersion with improved dissolution profile and enhanced oral bioavailability was formulated using silymarin, polyvinylpyrrolidone (PVP) and Tween 80 in water. In this solid dispersion, hydrophilic PVP was adhered onto the surface of crystalline drug rendering silymarin hydrophilic without changing its crystallinity. The drug solubility from the optimised solid dispersion prepared with silymarin/PVP/Tween 80 at the weight ratio of 5/2.5/2.5 increased by almost 650-fold compared to drug powder. The drug was physically and chemically stable in the solid dispersion for at least 6 months. Moreover, the solid dispersion enhanced the oral bioavailability of the drug in rats by almost 3-fold compared to the commercial product. The silymarin-loaded solid dispersion also exhibited advanced hepatoprotective bioactivity against CCl4-induced liver damage compared to silymarin or the commercial product. Thus, this silymarin-loaded solid dispersion would be useful for the enhancement of oral bioavailability and hepatoprotective activity of poorly water-soluble silymarin.

Development of novel bepotastine salicylate salt bioequivalent to the commercial bepotastine besilate in beagle dogs

To develop a novel salt form of bepotastine with bioequivalent to the commericial bepostastine besilate, bepostastine salicylate was prepared and its physicochemical properties were investigated. Furthermore, the bepotastine salicylate-loaded tablet was prepared by the wet granulation method, and the dissolution and bioavailability in beagle dogs were evaluated compared to the bepotastine besilate-loaded commercial product. Bepotastine salicylate improved the solubility of bepotastine, and the extent of solubility improvement by salicylate form was similar to that by besilate form. However, this novel salt exhibited negligible hygroscopicity similar to besilate form, and showed slightly higher melting point than besilate form. It was stable in various pH solutions. Furthermore, the bepotastine salicylate-loaded tablet composed of bepotastine salicylate, microcrystalline cellulose, D-mannitol, povidone, sodium starch glycolate and sodium stearyl fumarate at the weight ratio of 9.63/60.97/38/3.6/6/1.8 showed similar dissolution to the bepotastine besilate-loaded commercial product in water, pH 1.2, pH 4.0 and pH 6.8 and was bioequivalent to the commercial product in beagle dogs. Thus, this bepotastine salicylate-loaded tablet would be a promising candidate with bioequivalence to the bepotastine besilate-loaded commercial product.

Novel piroxicam-loaded nanospheres generated by the electrospraying technique: physicochemical characterisation and oral bioavailability evaluation

Abstract To determine if a novel electrospraying technique could be applied to an oral drug delivery system for improving the solubility and oral bioavailability of poorly water-soluble piroxicam; the nanospheres were generated with drug and polyvinylpyrrolidone (PVP) using electrospraying technique; and their physicochemical properties, solubility, release and pharmacokinetics were evaluated in comparison with piroxicam powder. All nanospheres had significantly increased drug solubility and dissolution rates in comparison with the drug powder. In particular, the nanosphere composed of piroxicam and PVP at a weight ratio of 2:8 gave about 600-fold higher solubility, 15-fold higher release rate and 3-fold higher AUC in comparison to piroxicam powder, leading to significantly enhanced oral bioavailability in rats, due to the mingled effect of nanonisation along with transformation to the amorphous state. Thus, this electrospraying technique can be utilised to produce a novel oral nanosphere delivery system with enhanced solubility and oral bioavailability for poorly water-soluble piroxicam.

Development of a novel combination tablet containing trimebutine maleate and mosapride citrate for the treatment of functional dyspepsia

To develop a novel combination tablet which contained 100 mg trimebutine maleate and 5 mg mosapride citrate (TMCT) for the treatment of functional dyspepsia, the wet granulation method was used to prepare TMCTs with various amounts of diluents and stabilizers. The levels of impurities, the stability and the dissolution of the TMCTs were investigated. The oral bioavailability of drugs in the TMCTs was then evaluated and compared to the simultaneous oral administration of trimebutine maleate-loaded and mosapride citrate-loaded commercial products in the beagle dog. Among the diluents tested, D-mannitol was selected, since the microcrystalline cellulose and lactose did not inhibit the production of drug impurities due to their hygroscopic properties and chemical interactions, respectively. Furthermore, succinic acid was selected as the stabilizer because it gave the lowest level of total drug impurities of the organic acids tested. The combination tablet of trimebutine maleate and mosapride citrate prepared with D-mannitol and succinic acid gave a total drug content higher than 95% and total impurities lower than 0.5% at 25°C/60% RH and 40°C/75% RH during a 6-month period, indicating that the tablets were stable for at least 6 months. Furthermore, this combination tablet showed a similar dissolution to the trimebutine maleate-loaded and mosapride citrate-loaded commercial products and gave insignificantly different absorption compared to these commercial products in beagle dogs. Thus, the combination tablet of trimebutine maleate and mosapride citrate prepared with D-mannitol and succinic acid would be a stable and effective oral pharmaceutical product for the treatment of functional dyspepsia.

Influence of polyvinylpyrrolidone quantity on the solubility, crystallinity and oral bioavailability of fenofibrate in solvent-evaporated microspheres

Abstract The objective of this study is to explore the influence of polyvinylpyrrolidone (PVP) quantity on the solubility, crystallinity and oral bioavailability of poorly water-soluble fenofibrate in solvent-evaporated microspheres. Numerous microspheres were prepared with fenofibrate, sodium lauryl sulphate (SLS) and PVP using the spray-drying technique. Their aqueous solubility, dissolution, physicochemical properties and pharmacokinetics in rats were assessed. The drug in the solvent-evaporated microspheres composed of fenofibrate, PVP and SLS at the weight ratio of 1:0.5:0.25 was not entirely changed to the amorphous form and partially in the microcrystalline state. However, the microspheres at the weight ratio of 1:4:0.25 provided the entire conversion to the amorphous form. The latter microspheres, with an improvement of about 115 000-fold in aqueous solubility and 5.6-fold improvement in oral bioavailability compared with the drug powder, gave higher aqueous solubility and oral bioavailability compared with the former. Thus, PVP quantity played an important role in these properties of fenofibrate in the solvent-evaporated microspheres.

Comparison of solventwetted and kneaded l-sulpirideloaded solid dispersions: Powder characterization and in vivo evaluation

The purpose of this study was to compare the powder properties, solubility, dissolution and oral absorption of solvent-wetted (SWSD) and kneaded (KNSD) l-sulpiride-loaded solid dispersions. The SWSD and KNSD were prepared with silicon dioxide, sodium laurylsulfate and D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) using a spray dryer and high shear mixer, respectively. Their powder properties, solubility, dissolution and oral absorption were assessed compared to l-sulpiride powder. The drug in SWSD was in the amorphous state; however, in KNSD, it existed in the crystalline state. The SWSD with a drug/sodium laurylsulphate/TPGS/silicon dioxide ratio of 5/1/2/12 gave the higher drug solubility and dissolution compared to the KNSD with the same composition. The oral absorption of drug in the SWSD was 1.4 fold higher than the KNSD and 3.0 fold higher than the l-sulpiride powder (p<0.05) owing to better solubility and reduced crystallinity. Furthermore, the SWSD at the half dose was bioequivalent of commercial l-sulpiride-loaded product in rats. Thus, the SWSD with more improved oral absorption would be recommended as an alternative for the l-sulpiride-loaded oral administration.

Clopidogrel Napadisilate Monohydrate Loaded Surface-Modified Solid Dispersion: Physicochemical Characterization and in Vivo Evaluation.

To develop a novel solid dispersion of clopidogrel napadisilate monohydrate (CNM) with improved stability and oral bioavailability, surface-modified solid dispersions were prepared by spray-drying using water as a solvent, Tween 80 as a surfactant, and hydroxypropylmethyl cellulose (HPMC) as a hydrophilic polymer, and optimized according to drug solubility. Its solid-state characterization was evaluated by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD) and differential scanning calorimetry (DSC). The stability study was performed at 50°C/75% RH over a period of 6 weeks. Its dissolution profiles and oral bioavailability in rats were also compared with that of CNM and clopidogrel bisulfate (CB). The solid dispersion, composed of CNM/HPMC/Tween80 at a weight ratio of 10/2.5/2.5, in which CNM was in the crystalline state, increased the drug solubility approximately 4.6-fold. It showed a significantly better dissolution profile than that of CNM in all the dissolution media, and gave either similar or higher dissolution compared to that of CB. This solubility and dissolution enhancement was attributed to improved wetting and solubilization of CNM crystals due to hydrophilic carriers attached on the drug surface. It had excellent stability, thereby addressing the stability problem of CB powder. Furthermore, it increased the area under curve (AUC) values by about 4-fold and 1.6-fold compared to CNM and CB, respectively, suggesting that it improved the oral bioavailability of the drug in rats. Thus, this solid dispersion system prepared with water, HPMC and Tween 80 can be used to enhance the bioavailability of CNM as well as to solve the stability problem of CB.

Development of RP-HPLC method for simultaneous determination of docetaxel and curcumin in rat plasma: Validation and stability

The purpose of the present research was to develop a suitable, simple, precise, accurate, robust, and reproducible RP-HPLC method for a reliable simultaneous quantification of docetaxel (DTX) and curcumin (CCM) in rat plasma samples using paclitaxel (PTX) as an internal standard. The samples were assayed by the Agilent 1260 Infinity HPLC instrument using a Capcell Pak C8 column (4.6 mm × 150 mm, 5 µm) under isocratic conditions. The mobile phase consisted of acetonitrile and triple distilled water (40/60, v/v) with a flow rate of 1.0 ml/min. The eluent was monitored at 230 nm for simultaneous measurement of curcumin and docetaxel. The method was validated by determining system suitability, selectivity, sensitivity, linearity, inter-day and intra-day precision, accuracy, robustness, and stability in accordance with the guidelines of the United States Food and Drug Administration (FDA). The developed chromatographic method proved to be simple, precise, accurate, robust and reproducible. Moreover, the samples showed stability at room temperature over a period of 48 h. Thus, this method would be employed for routine simultaneous quantification of docetaxel and curcumin in rat plasma samples.

Novel neomycin sulfate-loaded hydrogel dressing with enhanced physical dressing properties and wound-curing effect

Abstract To develop a novel neomycin sulfate-loaded hydrogel dressing (HD), numerous neomycin sulfate-loaded HDs were prepared with various amounts of polyvinyl alcohol (PVA), polyvinyl pyrrolidone (PVP) and sodium alginate (SA) using freeze-thawing technique, and their physical dressing properties, drug release, in vivo wound curing and histopathology in diabetic-induced rats were assessed. SA had a positive effect on a swelling capacity, but a negative effect on the physical dressing properties and drug release of HD. However, PVP did the opposite. In particular, the neomycin sulfate-loaded HD composed of drug, PVA, PVP and SA at the weight ratio of 1/10/0.8/0.8 had excellent swelling and bioadhesive capacity, good elasticity and fast drug release. Moreover, this HD gave more improved wound curing effect compared to the commercial product, ensured the disappearance of granulation tissue and recovered the wound tissue to normal. Therefore, this novel neomycin sulfate-loaded HD could be an effective pharmaceutical product for the treatment of wounds.

Cefdinir Solid Dispersion Composed of Hydrophilic Polymers with Enhanced Solubility, Dissolution, and Bioavailability in Rats

The aim of this work was to develop cefdinir solid dispersions (CSDs) prepared using hydrophilic polymers with enhanced dissolution/solubility and in vivo oral bioavailability. CSDs were prepared with hydrophilic polymers such as hydroxypropyl-methylcellulose (HPMC; CSD1), carboxymethylcellulose-Na (CMC-Na; CSD2), polyvinyl pyrrolidone K30 (PVP K30; CSD3) at the weight ratio of 1:1 (drug:polymer) using a spray-drying method. The prepared CSDs were characterized by aqueous solubility, differential scanning calorimetry (DSC), powder X-ray diffraction (p-XRD), scanning electron microscopy (SEM), aqueous viscosity, and dissolution test in various media. The oral bioavailability of CSDs was also evaluated in rats and compared with cefdinir powder suspension. The cefdinir in CSDs was amorphous form, as confirmed in the DSC and p-XRD measurements. The developed CSDs commonly resulted in about 9.0-fold higher solubility of cefdinir and a significantly improved dissolution profile in water and at pH 1.2, compared with cefdinir crystalline powder. Importantly, the in vivo oral absorption (represented as AUCinf) was markedly increased by 4.30-, 6.77- and 3.01-fold for CSD1, CSD2, and CSD3, respectively, compared with cefdinir suspension in rats. The CSD2 prepared with CMC-Na would provide a promising vehicle to enhance dissolution and bioavailability of cefdinir in vivo.