L.A. Fernández

Stir-bar sorptive extraction: A view on method optimisation, novel applications, limitations and potential solutions

Introduced in 1999 as a novel solventless sample preparation method, stir-bar sorptive extraction (SBSE) has become a popular analytical technique for the pre-concentration of organic compounds into a polydimethylsiloxane (PDMS)-coated stir-bar. In the last 10 years, hundreds of applications in the environmental, food and biomedical fields can be found in the literature. However, only PDMS-coated stir-bars are commercially available, which reduces the applicability of SBSE to the extraction of the non-polar compounds due to the poor extractability of more polar analytes. In this review, a view on method optimisation, limitations, potential solutions such as in-house coatings and derivatisation and novel applications in multi-residue analysis and passive sampling are revised.

MultiSimplex optimisation of the solid-phase microextraction-gas chromatographic-mass spectrometric determination of polycyclic aromatic hydrocarbons, polychlorinated biphenyls and phthalates from water samples

Solid-phase microextraction coupled to GC-MS was optimised for the determination of polycyclic aromatic hydrocarbons (PAHs), phthalate esters and polychlorinated biphenyls (PCBs) in water samples. A 30-microm polydimethylsiloxane fiber was immersed in a 30-ml water sample that contained the analytes of interest (PAHs, PCBs and phthalate esters) and the variables studied were extraction time (15-60 min), extraction temperature (30-90 degrees C), desorption time (1-5 min), desorption temperature (220-270 degrees C) and the addition of sodium chloride (0-9 g). The MultiSimplex programme based on the simplex algorithm was used to establish the optimal conditions. MultiSimplex allowed the simultaneous study of the variables mentioned above and considered the answers of all types of compounds studied in this work. Thus, the optimal conditions obtained allowed the simultaneous determination of PAHs, phthalate esters and PCBs. Furthermore, the accuracy and repeatability of the developed method were calculated from water samples spiked at known concentrations of the analytes. Finally, the optimised method was used to analyse water samples from different sampling points of the Urdaibai and Nerbioi-Ibaizabal estuaries (Biscay, Spain).

SELECTIVE EXTRACTION OF VANADIUM (V) FROM SOLUTIONS CONTAINING MOLYBDENUM (VI) BY AMMONIUM SALTS DISSOLVED IN TOLUENE

ABSTRACT Several separation schemes, involving liquid-liquid extraction procedures, were found to be theoretically feasible in order to separate Vanadium and Molybdenum based on computer simulation of the acid-base properties of these metals, where cationic and anionic (both mono and polynuclear) species are formed as the pH increases. A liquid cationic extractant (LIX 26), a basic alkylamine (Alamine 336) and a quaternary ammonium salt (Aliquat 336) were experimentally tested. Among them, the sulphate of the quaternary ammonium salt extracts V(V) selectively and quantitatively from Mo(VI) solutions in the basic range 8 < pH < 9. A close relation between the extraction of the metals and the distribution of their species in the aqueous phase has been found. The sulphate forms of Alamine 336 and Aliquat 336 extract quantitatively both metals at the pH where anionic polynuclear species are predominant.

Simultaneous speciation of methylmercury and butyltin species in environmental samples by headspace-stir bar sorptive extraction-thermal desorption-gas chromatography-mass spectrometry

In this work, making use of experimental designs, headspace-stir bar sorptive extraction (HS-SBSE) followed by thermal desorption (TD) coupled to a gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of mercury and tin organometallic compounds present in surface water, sediment and biological tissue was optimized. All solid samples require a previous extraction typically done with diluted HCl or KOH/methanol solutions, and the derivatization, in all the cases, of the organometallic compounds with NaBEt(4). As a consequence, the preconcentration step was carried out in a 0.1 mol L(-1) HOAc/NaOAc buffer solution, with 0.1% (m/v) of NaBEt(4), without the addition of NaCl as a salting out reagent, and with the stir bar (20 mm x 1 mm) located in the headspace (HS). In addition, the desorption step required the following conditions: 250 degrees C (desorption temperature), 15 min (desorption time), 14.1 psi (approximately 97.2 kPa) (vent pressure) and 75 mL min(-1) (vent flow). Finally, to assure the extraction of all the analytes under equilibrium, 5h are required. Inorganic mercury (Hg(2+)) and tripropyltin (TPrT) were used as internal standards to correct for variations in the extraction, derivatization and detection steps. The resulting method provides precise (4-17%) and accurate (against four certified reference materials) results in the ng L(-1) and pg g(-1) range concentrations with recoveries within 80-120% for water samples. The proposed methodology is currently applied in the speciation analysis of specimens obtained in different estuarine sites of the Basque Coast.

Simultaneous preconcentration of a wide variety of organic pollutants in water samples. Comparison of stir bar sorptive extraction and membrane-assisted solvent extraction.

Stir bar soptive extraction (SBSE) coupled to thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) and membrane-assisted solvent extraction (MASE) coupled to large volume injection-programmed temperature vaporisation-GC-MS (LVI-PTV-GC-MS) were optimised for the simultaneous determination of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phthalate esters (PEs), nonylphenols (NPs), polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in water samples. In the case of SBSE-TD, variables affecting the extraction (extraction time, addition of sodium chloride or methanol and sample volume) and desorption (cryofocusing temperature, desorption time and temperature, vent pressure and desorption flow) were fitted for the simultaneous determination. The extraction solvent nature (n-hexane, cyclohexane, n-heptane, ethyl acetate, toluene, dichloromethane or cyclohexane:ethyl acetate mixtures), as well as the addition of methanol (0-30%) and sodium chloride (0-20%), the extraction temperature (30-60 degrees C), shaking speed (250-750 rpm) and extraction time (5-150 min) were studied for the simultaneous membrane-assisted preconcentration. Finally, PTV-LVI variables such as injection volume (100-600 microL), injection speed (10-40 microL s(-1)), vent pressure (0-12.7 psi), vent time (0.05-0.8 min), vent flow (30-80 mL min(-1)), cryofocusing temperature (20-70 degrees C), split flow (20-100 mL min(-1)) and split time (1-5 min) were optimised. The optimisation was carried out by means of experimental design approaches in most of the cases. Precision (approximately 3-19% for both SBSE-TD and MASE-LVI-PTV), accuracy (approximately 80-120% for both SBSE-TD and MASE-LVI-PTV), limits of detection (LoDs) (0.1-222 ng L(-1) for MASE-LVI-PTV and 0.03-20.4 ng L(-1) for SBSE-TD in dependence of substance) and linearity (from 25 ng L(-1) up to at least 500 ng L(-1) for both procedures) were established for both procedures. Finally, the developed methods were applied to the determination of the free concentrations of PAHs, PCBs, PEs, NPs, PBBs and PBDEs in natural water samples (estuarine water and sea water) from the Bilbao estuary (Northern Spain) and comparable results were obtained with both procedures.

Comparison of microwave-assisted extraction and Soxhlet extraction for phenols in soil samples using experimental designs

A study and comparison of microwave-assisted extraction (MAE) and Soxhlet extraction for five phenols (phenol, 2-chlorophenol, 2-methylphenol, 2-nitrophenol and 2,4-dichlorophenol) in soils was carried out in order to establish a comparative analysis between the two techniques under their optimum conditions. The optimisation of both the MAE and Soxhlet extraction methods was achieved using experimental designs. The parameters studied were pressure inside the extraction vessel, extraction time, percentage of microwave power, solvent volume and percentage (v/v) of acetone in an acetone–hexane mixture for MAE and extraction time and percentage (v/v) of acetone in an acetone–hexane mixture for Soxhlet extraction. The simplex method was also used for obtaining the optimum conditions in some cases. The extracts were analysed by GC–MS or GC–FID.

Classification and identification of organic binding media in artworks by means of Fourier transform infrared spectroscopy and principal component analysis

AbstractFourier transform infrared spectroscopy is a powerful analytical technique to study organic materials. However, in Cultural Heritage, since the sample under analysis is always a complicated matrix of several materials, data analysis performed through peak-by-peak comparisons of sample spectra with those of standard compounds is a tedious method that does not always provide good results. To overcome this problem, a chemometric model based on principal component analysis was developed to classify and identify organic binding media in artworks. The model allows the differentiation of five families of binders: drying oils, waxes, proteins, gums, and resins, taking into account the absorption bands in two characteristic spectral windows: C–H stretching and carbonyl band. This new methodology was applied in the characterization of binders in three kinds of artworks: papers of historical, archeological, and artistic value, easel paintings, and polychromed stone-based sculptures. FigureAnalysis of the binder in a wallpaper of the 19th century by means of FTIR spectroscopy and chemometrics

Simultaneous determination of a variety of endocrine disrupting compounds in carrot, lettuce and amended soil by means of focused ultrasonic solid–liquid extraction and dispersive solid-phase extraction as simplified clean-up strategy

The present study is focused on the development of an analytical method based on focused ultrasonic solid-liquid extraction (FUSLE) followed by dispersive solid-phase extraction (dSPE) clean-up and liquid chromatography-triple quadrupole tandem mass spectrometry (LC-MS/MS) optimised for the simultaneous analysis of certain endocrine disrupting compounds (EDCs), including alkylphenols (APs), bisphenol A (BPA), triclosan (TCS) and several hormones and sterols in vegetables (lettuce and carrot) and amended soil samples. Different variables affecting the chromatographic separation, the electrospray ionisation and mass spectrometric detection were optimised in order to improve the sensitivity of the separation and detection steps. Under the optimised extraction conditions (sonication of 5min at 33% of power with pulse times on of 0.8s and pulse times off of 0.2s in 10mL of n-hexane:acetone (30:70, v:v) mixture using an ice bath), different dSPE clean-up sorbents, such as Florisil, Envi-Carb, primary-secondary amine bonded silica (PSA) and C18, or combinations of them were evaluated for FUSLE extracts before LC-MS/MS. Apparent recoveries and precision in terms of relative standard deviation (RSDs %) of the method were determined at two different fortification levels (according to the matrix and the analyte) and values in the 70-130% and 2-27% ranges, respectively, were obtained for most of the target analytes and matrices. Matrix-matched calibration approach and the use of labelled standards as surrogates were needed for the properly quantification of most analytes and matrices. Method detection limits (MDLs), estimated with fortified samples, in the ranges of 0.1-100ng/g for carrot, 0.2-152ng/g for lettuce and 0.9-31ng/g for amended soil were obtained. The developed methodology was applied to the analysis of 11 EDCs in both real vegetable bought in a local market and in compost (from a local wastewater treatment plant, WWTP) amended soil samples.

Simultaneous determination of perfluorinated compounds and their potential precursors in mussel tissue and fish muscle tissue and liver samples by liquid chromatography-electrospray-tandem mass spectrometry.

An analytical method for the simultaneous determination in fish liver and muscle tissue and mussel samples of 14 perfluorinated compounds (PFCs), including three perfluoroalkylsulfonates (PFSAs), seven perfluorocarboxylic acids (PFCAs), three perfluorophosphonic acids (PFPAs) and perfluorooctanesulfonamide (PFOSA), and 10 potential precursors, including four polyfluoroalkyl phosphates (PAPs), four fluorotelomer saturated acids (FTCAs) and two fluorotelomer unsaturated acids (FTUCAs), was developed in the present work. Different clean-up strategies by means of solid-phase extraction (SPE) using a mix-mode weak anion exchanger (WAX), reverse phase Envi-Carb or a combination of them was optimized and evaluated for the clean-up of focused ultrasonic solid-liquid (FUSLE) extracts before the analysis by liquid chromatography-triple quadrupole tandem mass spectrometry (LC-MS/MS). Mix-mode WAX coupled in-line to Envi-Carb was finally selected since it rendered the cleanest extracts and minimum matrix effect. The FUSLE-SPE-LC-MS/MS methodology was validated in terms of recovery, precision and method detection limits (MDLs). Apparent recovery values in the 65-116%, 59-119% and 67-126% range and MDLs in the 0.1-2.7 ng/g, 0.1-3.8 ng/g and 0.2-3.1ng/g range were obtained for liver, mussel and fish muscle tissue samples, respectively. The method developed was applied to the analysis of grey mullet liver (Chelon labrosus) and mussel (Mytilus galloprovincialis) samples from the Basque Coast (North of Spain) and Yellowfin tuna muscle tissue (Thunnus albacares) samples from the Indian Ocean. To the best of our knowledge this is the first method that describes the simultaneous determination of 14 PFCs and 10 potential precursors in fish liver, fish muscle tissue and mussel samples. Besides, this is the first time that 8:2 monosubstituted polyfluorodecyl phosphate (8:2 monoPAP) and 8:2 disubstituted polyfluorodecyl phosphate (8:2 diPAP) were detected in mussel and tuna samples, respectively.

Optimization of large volume injection-programmable temperature vaporization-gas chromatography-mass spectrometry analysis for the determination of estrogenic compounds in environmental samples.

Large volume injection-programmable temperature vaporization-gas chromatography-mass spectrometry (LVI-PTV-GC-MS) was optimized for the determination of estrone (E1), 17β-estradiol (E2), 17α-ethynyl estradiol (EE2), mestranol (MeEE2) and estriol (E3) for their determination in environmental samples (estuarine water, wastewater, fish bile and fish homogenate) after derivatization with 25 μL (BSTFA+1% TMCS) and 125 μL of pyridine. Experimental designs such as Plackett-Burman (PBD) and central composite designs (CCDs) were used to optimize the LVI-PTV variables (cryo-focusing temperature, vent time, vent flow, vent pressure, injection volume, purge flow to split vent, splitless time and injection speed). Optimized conditions were as follows: 45 μL of n-hexane extract are injected at 60°C and 6 μL/s with a vent flow and a vent pressure of 50 mL/min and 7.7 psi, respectively, during 5 min; then the split valve is closed for 1.5 min and afterwards the injector is cleaned at 100 mL/min before the next injection. The method was applied to the determination of estrogenic compounds in environmental samples such as estuarine water, wastewater, and fish homogenate and bile. Limits of detection (0.04-0.15 ng/L for water samples, 0.04-0.67 ng/g for fish bile and 0.1-7.5 ng for fish homogenate) obtained were approx. ten times lower than those obtained by means of a common split/splitless inlet.