Lay Poh Tan

Nanoparticles strengthen intracellular tension and retard cellular migration.

Nanoparticles can have profound effects on cell biology. Here, we show that after TiO2, SiO2, and hydroxyapatite nanoparticles treatment, TR146 epithelial cell sheet displayed slower migration. Cells after exposure to the nanoparticles showed increased cell contractility with significantly impaired wound healing capability however without any apparent cytotoxicity. We showed the mechanism is through nanoparticle-mediated massive disruption of the intracellular microtubule assembly, thereby triggering a positive feedback that promoted stronger substrate adhesions thus leading to limited cell motility.

Micropatterned matrix directs differentiation of human mesenchymal stem cells towards myocardial lineage.

Stem cell response can be influenced by a multitude of chemical, topological and mechanical physiochemical cues. While extensive studies have been focused on the use of soluble factors to direct stem cell differentiation, there are growing evidences illustrating the potential to modulate stem cell differentiation via precise engineering of cell shape. Fibronectin were printed on poly(lactic-co-glycolic acid) (PLGA) thin film forming spatially defined geometries as a means to control the morphology of bone marrow derived human mesenchymal stem cells (hMSCs). hMSCs that were cultured on unpatterned substrata adhered and flattened extensively (approximately 10,000 microm(2)) while cells grown on 20 microm micropatterend wide adhesive strips were highly elongated with much smaller area coverage of approximately 2000 microm(2). Gene expression analysis revealed up-regulation of several hallmark markers associated to neurogenesis and myogenesis for cells that were highly elongated while osteogenic markers were specifically down-regulated or remained at its nominal level. Even though there is clearly upregulated levels of both neuronal and myogenic lineages but at the functionally relevant level of protein expression, the myogenic lineage is dominant within the time scale studied as determined by the exclusive expression of cardiac myosin heavy chain for the micropatterned cells. Enforced cell shape distortion resulting in large scale rearrangement of cytoskeletal network and altered nucleus shape has been proposed as a physical impetus by which mechanical deformation is translated into biochemical response. These results demonstrated for the first time that cellular shape modulation in the absence of any induction factors may be a viable strategy to coax lineage-specific differentiation of stem cells.

Micro‐/Nano‐engineered Cellular Responses for Soft Tissue Engineering and Biomedical Applications

The development of biomedical devices and reconstruction of functional ex vivo tissues often requires the need to fabricate biomimetic surfaces with features of sub-micrometer precision. This can be achieved with the advancements in micro-/nano-engineering techniques, allowing researchers to manipulate a plethora of cellular behaviors at the cell-biomaterial interface. Systematic studies conducted on these 2D engineered surfaces have unraveled numerous novel findings that can potentially be integrated as part of the design consideration for future 2D and 3D biomaterials and will no doubt greatly benefit tissue engineering. In this review, recent developments detailing the use of micro-/nano-engineering techniques to direct cellular orientation and function pertinent to soft tissue engineering will be highlighted. Particularly, this article aims to provide valuable insights into distinctive cell interactions and reactions to controlled surfaces, which can be exploited to understand the mechanisms of cell growth on micro-/nano-engineered interfaces, and to harness this knowledge to optimize the performance of 3D artificial soft tissue grafts and biomedical applications.

Mechanical behavior of human mesenchymal stem cells during adipogenic and osteogenic differentiation

Human mesenchymal stem cells (hMSCs) have gained widespread attention in the field of tissue engineering but not much is known about the changes of mechanical properties during the process of cell lineage commitment and the mechanisms of these behaviors. It is believed that exploring the inter-relations between stem cells mechanical properties and lineage commitment will shed light on the mechanobiology aspect of differentiation. hMSCs were cultured in adipogenic and osteogenic mediums and the elastic moduli were monitored using micropipette aspiration. It was found that hMSCs undergoing osteogenesis have an instantaneous Youngs modulus of 890 +/- 219 Pa and an equilibrium Youngs modulus of 224 +/- 40 Pa, each is about 2-fold higher than the control group. Interestingly, cells cultured in adipogenic medium exhibited a slight increase in the cellular modulus followed by a decrease relative to that of the control group. Gene expression study was employed to gain insights into this phenomenon. Concomitant up regulation of actin binding filamin A (FLNa) and gamma-Tubulin with the cellular elastic modulus indicated their important role in mechanical regulation during hMSCs differentiation. Statistical results showed that cell shape and cell area changed with cellular mechanical properties, which means that cell morphology has a close relation with cell elastic modulus in the initial stage of differentiation. Collectively, these results provide a quantitative description of hMSCs mechanical behavior during the process of differentiation as well as the possible accompanying mechanism at the biomolecular level.

Preparation and Characterization of Quercetin Nanocrystals

This study is to enhance the dissolution rate of a poorly water-soluble drug, quercetin, by fabricating nanocrystals using high-pressure homogenization. The particle size, crystallinity, dissolution, and antioxidant effects of fabricated quercetin nanocrystals have been investigated. Characterization of the original quercetin powder and nanocrystals was carried out by photon correlation spectroscopy (PCS), laser diffraction, scanning electron microscopy, differential scanning calorimetry (DSC), X-ray diffraction, dissolution tester, and so on. A PCS size of about 483 nm was obtained for the nanocrystals after 20 cycles of homogenization at 1500 bar. X-ray diffraction and DSC studies revealed that the lyophilized quercetin nanoparticles were crystalline after high-pressure homogenization. The percent dissolution efficiency, relative dissolution, mean dissolution time, difference factor (f(1)), and similarity factor (f(2)) were calculated for the statistical analysis. It was found that the dissolution of the drug nanocrystals was much higher than that of the pure drug at pH 6.8 and 1.2. The antioxidant activity and reducing power of the quercetin nanocrystals were more effective than the original quercetin.

Human keratin hydrogels support fibroblast attachment and proliferation in vitro

Human hair keratins have a strong potential for development as clinically relevant biomaterials because they are abundant and bioactive and are a realistic source of autologous proteins. Specifically, keratins have the propensity to polymerize in an aqueous environment to form hydrogels. In order to evaluate the suitability of keratin hydrogels as substrates for cell culture, we have fabricated hydrogels using keratins extracted from human hair by inducing polymerization with Ca2+; these hydrogels exhibit highly branched and porous micro-architectures. L929 murine fibroblasts have been used in a preliminary cell culture study to compare the in vitro biocompatibility of the keratin hydrogels with collagen type 1 hydrogels of similar viscoelastic properties. Our results reveal that keratin hydrogels are comparable with collagen hydrogels in terms of the promotion of cell adhesion, proliferation and the preservation of cell viability. Interestingly, cells remain clustered in proliferative colonies within the keratin hydrogels but are homogeneously distributed as single cells in collagen hydrogels. Collectively, our results demonstrate that keratin hydrogels can be used as substrates for cell culture. Such gels might find applications as templates for soft tissue regeneration.

Thickness sensing of hMSCs on collagen gel directs stem cell fate

Mechanically compliant substrate provides crucial biomechanical cues for multipotent stem cells to regulate cellular fates such as differentiation, proliferation and maintenance of their phenotype. Effective modulus of which cells sense is not only determined by intrinsic mechanical properties of the substrate, but also the thickness of substrate. From our study, it was found that interference from underlying rigid support at hundreds of microns away could induce significant cellular response. Human mesenchymal stem cells (hMSCs) were cultured on compliant biological gel, collagen type I, of different thickness but identical ECM composition and local stiffness. The cells sensed the thin gel (130 μm) as having a higher effective modulus than the thick gel (1440 μm) and this was reflected in their changes in morphology, actin fibers structure, proliferation and tissue specific gene expression. Commitment into neuronal lineage was observed on the thin gel only. Conversely, the thick gel (1440 μm) was found to act like a substrate with lower effective modulus that inhibited actin fiber polymerization. Stem cells on the thick substrate did not express tissue specific genes and remained at their quiescent state. This study highlighted the need to consider not only the local modulus but also the thickness of biopolymer gel coating during modulation of cellular responses.

Bio‐inspired Micropatterned Platform to Steer Stem Cell Differentiation

1–4 ] Nevertheless, ineffi cient and uncontrolled differentiation along defi ned lineages as well as a lack of understanding of the microenvironmental cues that bring about homeostatic regulation severely restrict their therapeutic applications. To realize the full potential of stem cells, determinative strate-gies to control their differentiation are required. To date, the most common approach relies heavily on the optimiza-tion of a complex mix of soluble cues such as growth factors, cytokines, and chemicals to direct lineage commitment. How-ever, recent developments have shown that biophysical and biomechanical cues perceived by the stem cell within its niche can also function as potent regulators of stem cell fate.

Esophageal Tissue Engineering: An In-Depth Review on Scaffold Design

Treatment of esophageal cancer often requires surgical procedures that involve removal. The current approaches to restore esophageal continuity however, are known to have limitations which may not result in full functional recovery. In theory, using a tissue engineered esophagus developed from the patients own cells to replace the removed esophageal segment can be the ideal method of reconstruction. One of the key elements involved in the tissue engineering process is the scaffold which acts as a template for organization of cells and tissue development. While a number of scaffolds range from traditional non‐biodegradable tubing to bioactive decellularized matrix have been proposed to engineer the esophagus in the past decade, results are still not yet favorable with many challenges relating to tissue quality need to be met improvements. The success of new esophageal tissue formation will ultimately depend on the success of the scaffold being able to meet the essential requirements specific to the esophageal tissue. Here, the design of the scaffold and its fabrication approaches are reviewed. In this paper, we review the current state of development in bioengineering the esophagus with particular emphasis on scaffold design. Biotechnol. Bioeng. 2012;109: 1–15.

Direct laser machining-induced topographic pattern promotes up-regulation of myogenic markers in human mesenchymal stem cells

The engineering of tissue is preferably done with stem cells, which can be differentiated into the tissue of interest using biochemical or physical cues. While much effort has been focused on using biological factors to regulate stem cell differentiation, recently interest in the contribution of physical factors has increased. In this work, three-dimensional (3-D) microchannels with topographic micropatterns were fabricated by femtosecond laser machining on a biodegradable polymer (poly(L-lactide-co-ε-caprolactone)) substrate. Two substrates with narrow and wide channels respectively were created. Human mesenchymal stem cells (hMSCs) were cultured on the scaffolds for cell proliferation and cellular organization. Gene expression and the immunostaining of myogenic and neurogenic markers were studied. Both scaffolds improved the cell alignment along the channels as compared to the control group. Microfilaments within hMSCs were more significantly aligned and elongated on the narrower microchannels. The gene expression study revealed significant up-regulation of several hallmark markers associated with myogenesis for hMSCs cultured on the scaffold with narrow microchannels, while osteogenic and neurogenic markers were down-regulated or remained similar to the control at day 14. Immunostaining of myogen- and neurogen-specific differentiation markers were used to further confirm the specific differentiation towards a myogenic lineage. This study demonstrates that femtosecond laser machining is a versatile tool for generating controllable 3-D microchannels with topographic features that can be used to induce specific myogenic differentiation of hMSCs in vitro, even in the absence of biological factors.