Liheng Wu

Monodisperse MxFe3–xO4 (M = Fe, Cu, Co, Mn) Nanoparticles and Their Electrocatalysis for Oxygen Reduction Reaction

Sub-10 nm nanoparticles (NPs) of M(II)-substituted magnetite MxFe3-xO4 (MxFe1-xO•Fe2O3) (M = Mn, Fe, Co, Cu) were synthesized and studied as electrocatalysts for oxygen reduction reaction (ORR) in 0.1 M KOH solution. Loaded on commercial carbon support, these MxFe3-xO4 NPs showed the M(II)-dependent ORR catalytic activities with MnxFe3-xO4 being the most active followed by CoxFe3-xO4, CuxFe3-xO4, and Fe3O4. The ORR activity of the MnxFe3-xO4 was further tuned by controlling x and MnFe2O4 NPs were found to be as efficient as the commercial Pt in catalyzing ORR. The MnFe2O4 NPs represent a new class of highly efficient non-Pt catalyst for ORR in alkaline media.

Stable Cobalt Nanoparticles and Their Monolayer Array as an Efficient Electrocatalyst for Oxygen Evolution Reaction

Monodisperse cobalt (Co) nanoparticles (NPs) were synthesized and stabilized against oxidation via reductive annealing at 600 °C. The stable Co NPs are active for catalyzing the oxygen evolution reaction (OER) in 0.1 M KOH, producing a current density of 10 mA/cm(2) at an overpotential of 0.39 V (1.62 V vs RHE, no iR-correction). Their catalysis is superior to the commercial Ir catalyst in both activity and stability. These Co NPs are also assembled into a monolayer array on the working electrode, allowing the detailed study of their intrinsic OER activity. The Co NPs in the monolayer array show 15 times higher turnover frequency (2.13 s(-1)) and mass activity (1949 A/g) than the NPs deposited on conventional carbon black (0.14 s(-1) and 126 A/g, respectively) at an overpotential of 0.4 V. These stable Co NPs are a promising new class of noble-metal-free catalyst for water splitting.

New Approach to Fully Ordered fct-FePt Nanoparticles for Much Enhanced Electrocatalysis in Acid

Fully ordered face-centered tetragonal (fct) FePt nanoparticles (NPs) are synthesized by thermal annealing of the MgO-coated dumbbell-like FePt-Fe3O4 NPs followed by acid washing to remove MgO. These fct-FePt NPs show strong ferromagnetism with room temperature coercivity reaching 33 kOe. They serve as a robust electrocatalyst for the oxygen reduction reaction (ORR) in 0.1 M HClO4 and hydrogen evolution reaction (HER) in 0.5 M H2SO4 with much enhanced activity (the most active fct-structured alloy NP catalyst ever reported) and stability (no obvious Fe loss and NP degradation after 20 000 cycles between 0.6 and 1.0 V (vs RHE)). Our work demonstrates a reliable approach to FePt NPs with much improved fct-ordering and catalytic efficiency for ORR and HER.

Organic Phase Syntheses of Magnetic Nanoparticles and Their Applications

In the past two decades, the synthetic development of magnetic nanoparticles (NPs) has been intensively explored for both fundamental scientific research and technological applications. Different from the bulk magnet, magnetic NPs exhibit unique magnetism, which enables the tuning of their magnetism by systematic nanoscale engineering. In this review, we first briefly discuss the fundamental features of magnetic NPs. We then summarize the synthesis of various magnetic NPs, including magnetic metal, metallic alloy, metal oxide, and multifunctional NPs. We focus on the organic phase syntheses of magnetic NPs with precise control over their sizes, shapes, compositions, and structures. Finally we discuss the applications of various magnetic NPs in sensitive diagnostics and therapeutics, high-density magnetic data recording and energy storage, as well as in highly efficient catalysis.

Tuning Sn-Catalysis for Electrochemical Reduction of CO2 to CO via the Core/Shell Cu/SnO2 Structure

Tin (Sn) is known to be a good catalyst for electrochemical reduction of CO2 to formate in 0.5 M KHCO3. But when a thin layer of SnO2 is coated over Cu nanoparticles, the reduction becomes Sn-thickness dependent: the thicker (1.8 nm) shell shows Sn-like activity to generate formate whereas the thinner (0.8 nm) shell is selective to the formation of CO with the conversion Faradaic efficiency (FE) reaching 93% at -0.7 V (vs reversible hydrogen electrode (RHE)). Theoretical calculations suggest that the 0.8 nm SnO2 shell likely alloys with trace of Cu, causing the SnO2 lattice to be uniaxially compressed and favors the production of CO over formate. The report demonstrates a new strategy to tune NP catalyst selectivity for the electrochemical reduction of CO2 via the tunable core/shell structure.

Core/Shell Face-Centered Tetragonal FePd/Pd Nanoparticles as an Efficient Non-Pt Catalyst for the Oxygen Reduction Reaction.

We report the synthesis of core/shell face-centered tetragonal (fct)-FePd/Pd nanoparticles (NPs) via reductive annealing of core/shell Pd/Fe3O4 NPs followed by temperature-controlled Fe etching in acetic acid. Among three different kinds of core/shell FePd/Pd NPs studied (FePd core at ∼8 nm and Pd shell at 0.27, 0.65, or 0.81 nm), the fct-FePd/Pd-0.65 NPs are the most efficient catalyst for the oxygen reduction reaction (ORR) in 0.1 M HClO4 with Pt-like activity and durability. This enhanced ORR catalysis arises from the desired Pd lattice compression in the 0.65 nm Pd shell induced by the fct-FePd core. Our study offers a general approach to enhance Pd catalysis in acid for ORR.

Monolayer Assembly of Ferrimagnetic CoxFe3–xO4 Nanocubes for Magnetic Recording

We report a facile synthesis of monodisperse ferrimagnetic Co(x)Fe(3-x)O4 nanocubes (NCs) through thermal decomposition of Fe(acac)3 and Co(acac)2 (acac = acetylacetonate) in the presence of oleic acid and sodium oleate. The sizes of the NCs are tuned from 10 to 60 nm, and their composition is optimized at x = 0.6 to show strong ferrimagnetism with the 20 nm Co0.6Fe2.4O4 NCs showing a room temperature Hc of 1930 Oe. The ferrimagnetic NCs are self-assembled at the water-air interface into a large-area (in square centimeter) monolayer array with a high packing density and (100) texture. The 20 nm NC array can be recorded at linear densities ranging from 254 to 31 kfci (thousand flux changes per inch). The work demonstrates the great potential of solution-phase synthesis and self-assembly of magnetic array for magnetic recording applications.

Enzymatic Transformation of Phosphate Decorated Magnetic Nanoparticles for Selectively Sorting and Inhibiting Cancer Cells

As an important and necessary step of sampling biological specimens, the separation of malignant cells from a mixed population of cells usually requires sophisticated instruments and/or expensive reagents. For health care in the developing regions, there is a need for an inexpensive sampling method to capture tumor cells for rapid and accurate diagnosis. Here we show that an underexplored generic difference—overexpression of ectophosphatases—between cancer and normal cells triggers the d-tyrosine phosphate decorated magnetic nanoparticles (Fe3O4-p(d-Tyr)) to adhere selectively on cancer cells upon catalytic dephosphorylation, which enables magnetic separation of cancer cells from mixed population of cells (e.g., cocultured cancer cell (HeLa-GFP) and stromal cells (HS-5)). Moreover, the Fe3O4-p(d-Tyr) nanoparticles also selectively inhibit cancer cells in the coculture. As a general method to broadly target cancer cells without highly specific ligand–receptor interactions (e.g., antibodies), the use of an enzymatic reaction to spatiotemporally modulate the state of various nanostructures in cellular environments will ultimately lead to the development of new theranostic applications of nanomaterials.

Stabilizing Fe Nanoparticles in the SmCo5 Matrix

We report a new strategy for stabilizing Fe nanoparticles (NPs) in the preparation of SmCo5-Fe nanocomposites. We coat the presynthesized Fe NPs with SiO2 and assemble the Fe/SiO2 NPs with Sm-Co-OH to form a mixture. After reductive annealing at 850 °C in the presence of Ca, we obtain SmCo5-Fe/SiO2 composites. Following aqueous NaOH washing and compaction, we produced exchange-coupled SmCo5-Fe nanocomposites with Fe NPs controlled at 12 nm. Our work demonstrates a successful strategy of stabilizing high moment magnetic NPs in a hard magnetic matrix to produce a nanocomposite with tunable magnetic properties.

Well-Defined Metal Nanoparticles for Electrocatalysis

Abstract Coupling electrochemical oxidation and reduction reactions is an important approach for energy production with minimal environmental impact. Low-temperature polymer electrolyte membrane fuel cells and electrochemical water-splitting systems are two representative devices developed for clean energy applications. To maintain high energy conversion efficiency, metal nanoparticles (MNPs) have been extensively studied as efficient catalysts for these reactions. Recent advance in chemical syntheses allows the development of well-defined MNPs and deeper understanding on size-, shape-, composition-, and structure-dependent electrocatalysis. As a result, the catalytic efficiency of these MNPs can be better tuned to a new level. This chapter highlights the enhanced electrocatalysis of various MNPs for the oxygen reduction reaction and methanol/formic acid oxidation reaction for fuel cell applications, oxygen evolution reaction and hydrogen evolution reaction for water splitting, and the selective electrochemical reduction of CO 2 to CO. These studies on the well-defined MNPs offer some exciting insights for future developments of advanced nanocatalysts with maximized efficiencies for practical applications in electrochemical devices.