Luc Van Meervelt

Carboxyl-Functionalized Task-Specific Ionic Liquids for Solubilizing Metal Oxides

Imidazolium, pyridinium, pyrrolidinium, piperidinium, morpholinium, and quaternary ammonium bis(trifluoromethylsulfonyl)imide salts were functionalized with a carboxyl group. These ionic liquids are useful for the selective dissolution of metal oxides and hydroxides. Although these hydrophobic ionic liquids are immiscible with water at room temperature, several of them form a single phase with water at elevated temperatures. Phase separation occurs upon cooling. This thermomorphic behavior has been investigated by (1)H NMR, and it was found that it can be attributed to the temperature-dependent hydration and hydrogen-bond formation of the ionic liquid components. The crystal structures of four ionic liquids and five metal complexes have been determined.

The PP1 binding code: a molecular‐lego strategy that governs specificity

Ser/Thr protein phosphatase 1 (PP1) is a single‐domain hub protein with nearly 200 validated interactors in vertebrates. PP1‐interacting proteins (PIPs) are ubiquitously expressed but show an exceptional diversity in brain, testis and white blood cells. The binding of PIPs is mainly mediated by short motifs that dock to surface grooves of PP1. Although PIPs often contain variants of the same PP1 binding motifs, they differ in the number and combination of docking sites. This molecular‐lego strategy for binding to PP1 creates holoenzymes with unique properties. The PP1 binding code can be described as specific, universal, degenerate, nonexclusive and dynamic. PIPs control associated PP1 by interference with substrate recruitment or access to the active site. In addition, some PIPs have a subcellular targeting domain that promotes dephosphorylation by increasing the local concentration of PP1. The diversity of the PP1 interactome and the properties of the PP1 binding code account for the exquisite specificity of PP1 in vivo.

Pyrrolidinium Ionic Liquid Crystals

N-alkyl-N-methylpyrrolidinium cations have been used for the design of ionic liquid crystals, including a new type of uranium-containing metallomesogen. Pyrrolidinium salts with bromide, bis(trifluoromethylsulfonyl)imide, tetrafluoroborate, hexafluorophosphate, thiocyanate, tetrakis(2- thenoyltrifluoroacetonato)europate(III) and tetrabromouranyl counteranions were prepared. For the bromide salts and tetrabromouranyl compounds, the chain length of the alkyl group C(n)H(2n+1) was varied from eight to twenty carbon atoms (n = 8, 10-20). The compounds show rich mesomorphic behaviour: highly ordered smectic phases (the crystal smectic E phase and the uncommon crystal smectic T phase), smectic A phases, and hexagonal columnar phases were observed, depending on chain length and anion. This work gives better insight into the nature and formation of the crystal smectic T phase, and the molecular requirements for the appearance of this highly ordered phase. This uncommon tetragonal mesophase is thoroughly discussed on the basis of detailed powder X-ray diffraction experiments and in relation to the existing literature. Structural models are proposed for self-assembly of the molecules within the smectic layers. In addition, the photophysical properties of the compounds containing a metal complex anion were investigated. For the uranium-containing mesogens, luminescence can be induced by dissolving them in an ionic liquid matrix. The europium-containing compound shows intense red photoluminescence with high colour purity.

Hydrophobic ionic liquids with strongly coordinating anions

Ionic liquids containing the hexafluoroacetylacetonate anion are immiscible with water and they exhibit strong metal-complexing ability.

Visible and near-infrared emission by samarium(III)-containing ionic liquid mixtures.

Highly luminescent anionic samarium(III) beta-diketonate and dipicolinate complexes were dissolved in the imidazolium ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C(6)mim][Tf(2)N]. The solubility of the complexes in the ionic liquid was ensured by a careful choice of the countercation of the samarium(III) complex. The samarium(III) complexes that were considered are [C(6)mim][Sm(tta)(4)], where tta is 2-thenoyltrifluoroacetonate; [C(6)mim][Sm(nta)(4)], where nta is 2-naphthoyltrifluoroacetonate; [C(6)mim][Sm(hfa)(4)], where hfa is hexafluoroacetylacetonate; and [choline](3)[Sm(dpa)(3)], where dpa is pyridine-2,6-dicarboxylate (dipicolinate) and [choline](+) is (2-hydroxyethyl)trimethyl ammonium. The crystal structures of the tetrakis samarium(III) beta-diketonate complexes revealed a distorted square antiprismatic coordination for the samarium(III) ion in all three cases. Luminescence spectra were recorded for the samarium(III) complexes dissolved in the imidazolium ionic liquid as well as in a conventional solvent, that is, acetonitrile or water for the beta-diketonate and dipicolinate complexes, respectively. These experiments demonstrate that [C(6)mim][Tf(2)N] is a suitable spectroscopic solvent for studying samarium(III) luminescence. High-luminescence quantum yields were observed for the samarium(III) beta-diketonate complexes in solution.

A Diversity‐Oriented Approach to Spiroindolines: Post‐Ugi Gold‐Catalyzed Diastereoselective Domino Cyclization

Gold-catalyzed carbocyclization and heteroannulation strategies have recently attracted much attention owing to the selective and efficient activation of the C C bond towards a wide range of nucleophiles that these methods provide. Domino approaches involving gold-catalysis lead to complex heterocyclic compounds under exceedingly mild reaction conditions. Although gold-catalyzed approaches are rising to prominence, they suffer in terms of diversity and procedural length. Multistep sequences are usually required for assembling the starting material for cyclization. We have recently reported a concise route to indoloazocines by a sequential Ugi/gold-catalyzed intramolecular hydroarylation approach. Inspired by these findings and as a result of our continued synthetic interest in the indole core, multicomponent reactions and transition metal-catalysis, we have developed a post-Ugi gold-catalyzed domino cyclization method to generate spiroindolines. The Ugi four-component reaction (4-CR) of indole-3carboxaldehyde (1a) with p-methoxybenzyl amine (2a), 2-butynoic acid (3a) and tert-butyl isonitrile (4a) in methanol at 50 8C gave Ugi-adduct 5a in 71% yield. When this was treated with 5 mol% of Au[PPh3]OTf (OTf= trifluoromethanesulfonate) in CDCl3 at RT, the expected outcome of the reaction was indoloazepinone 6a’ through an endo-dig cyclization followed by rearrangement (Scheme 1). Surprisingly, an exo-dig cyclization followed by intramolecular trapping of the spiro intermediate occurred instead, resulting in the diastereoselective formation of tetracyclic spiroindoline 6a in 61% yield (Scheme 1). This observation was remarkable, as the attack on the a-position of an alkyne conjugated with an amide is rare, and trapping of the spiro intermediate by a sterically hindered tert-butyl amide is rather unexpected, as was the diastereoselectivity observed. Spiroindolines are prominent molecular motifs that are frequently encountered among the large family of alkaloids; for example, it is present in communesines and perophoramidines (Figure 1), which display distinct pharmacological properties. These fused polycyclic systems, which feature quaternary stereocenters, present a nontrivial challenge for organic chemists to develop synthetic approaches.

Copper(I)‐Containing Ionic Liquids for High‐Rate Electrodeposition

New metal-containing ionic liquids [Cu(CH(3)CN)(n)][Tf(2)N] (n=2, 4; Tf(2)N=bis(trifluoromethylsulfonyl)- amide) have been synthesised and used as a non-aqueous electrolyte for the electrodeposition of copper at current densities greater than 25 A dm(-2). The tetrahedral copper(I)-containing cation in [Cu(CH(3)CN)(4)][Tf(2)N] is structurally analogous to quaternary ammonium and phosphonium ionic liquids and overcomes problems of metal solubility and mass transport. Two CH(3)CN ligands are removed at elevated temperatures to give [Cu(CH(3)CN)(2)][Tf(2)N], which can be used as a concentrated non-aqueous electrolyte. The structural and electrochemical characterisation of these compounds is described herein.

Synthesis, Spectroscopy, Crystal Structure, Electrochemistry, and Quantum Chemical and Molecular Dynamics Calculations of a 3-Anilino Difluoroboron Dipyrromethene Dye

An asymmetrically substituted fluorescent difluoroboron dipyrromethene (BODIPY) dye, with a phenylamino group at the 3-position of the BODIPY chromophore, has been synthesized by nucleophilic substitution of 3,5-dichloro-8-(4-tolyl)-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene. The solvent-dependent spectroscopic and photophysical properties have been investigated by means of UV-vis spectrophotometry and steady-state and time-resolved fluorometry and reflect the large effect of the anilino substituent on the fluorescence characteristics. The compound has a low fluorescence quantum yield in all but the apolar solvents cyclohexane, toluene, and chloroform. Its emission maxima in a series of solvents from cyclohexane to methanol are red-shifted by approximately 50 nm in comparison to classic BODIPY derivatives. Its oxidation potential in dichloromethane is at ca. 1.14 V versus Ag/AgCl. The absorption bandwidths and Stokes shifts are much larger than those of typical, symmetric difluoroboron dipyrromethene dyes. The values of the fluorescence rate constant are in the (1.4-1.7) x 10(8) s(-1) range and do not vary much between the solvents studied. X-ray diffraction analysis shows that the BODIPY core is planar. Molecular dynamics simulations show that there is no clear indication for aggregates in solution.

Speciation of Copper(II) Complexes in an Ionic Liquid Based on Choline Chloride and in Choline Chloride/Water Mixtures

A deep-eutectic solvent with the properties of an ionic liquid is formed when choline chloride is mixed with copper(II) chloride dihydrate in a 1:2 molar ratio. EXAFS and UV-vis-near-IR optical absorption spectroscopy have been used to compare the coordination sphere of the cupric ion in this ionic liquid with that of the cupric ion in solutions of 0.1 M of CuCl(2)·2H(2)O in solvents with varying molar ratios of choline chloride and water. The EXAFS data show that species with three chloride ions and one water molecule coordinated to the cupric ion as well as species with two chloride molecules and two water molecules coordinated to the cupric ion are present in the ionic liquid. On the other hand, a fully hydrated copper(II) ion is formed in an aqueous solution free of choline chloride, and the tetrachlorocuprate(II) complex forms in aqueous choline chloride solutions with more than 50 wt % of choline chloride. In solutions with between 0 and 50 wt % of choline chloride, mixed chloro-aquo complexes occur. Upon standing at room temperature, crystals of CuCl(2)·2H(2)O and of Cu(choline)Cl(3) formed in the ionic liquid. Cu(choline)Cl(3) is the first example of a choline cation coordinating to a transition-metal ion. Crystals of [choline](3)[CuCl(4)][Cl] and of [choline](4)[Cu(4)Cl(10)O] were also synthesized from molecular or ionic liquid solvents, and their crystal structures were determined.

Uranyl Complexes of Carboxyl-Functionalized Ionic Liquids

Uranium(VI) oxide has been dissolved in three different ionic liquids functionalized with a carboxyl group: betainium bis[(trifluoromethyl)sulfonyl]imide, 1-(carboxymethyl)-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, and N-(carboxymethyl)-N-methylpyrrolidinium bis[(trifluoromethyl)sulfonyl]imide. The dissolution process results in the formation of uranyl complexes with zwitterionic carboxylate ligands and bis[(trifluoromethyl)sulfonyl]imide (bistriflimide) counterions. An X-ray diffraction study on single crystals of the uranyl complexes revealed that the crystal structure strongly depends on the cationic core appended to the carboxylate groups. The betainium ionic liquid gives a dimeric uranyl complex, the imidazolium ionic liquid a monomeric complex, and the pyrrolidinium ionic liquid a one-dimensional polymeric uranyl complex. Extended X-ray absorption fine structure measurements have been performed on the betainium uranyl complex. The absorption and luminescence spectra of the uranyl betainium complex have been studied in the solid state and dissolved in water, in acetonitrile, and in the ionic liquid betainium bistriflimide. The carboxylate groups remain coordinated to uranyl in acetonitrile and in betainium bistriflimide but not in water.