Luciano Curcio

Continuous-wave backward frequency doubling in periodically poled lithium niobate

We report on backward second-harmonic-generation in bulk periodically poled congruent lithium niobate with a 3.2 μm period. A tunable continuous-wave Ti:sapphire laser allowed us exciting two resonant quasi-phase-matching orders in the backward configuration. The resonances were also resolved by temperature tuning and interpolated with standard theory to extract relevant information on the sample.

Evidence of stochastic resonance in the mating behavior of Nezara viridula (L.)

We investigate the role of the noise in the mating behavior between individuals of Nezara viridula (L.), by analyzing the temporal and spectral features of the non-pulsed type female calling song emitted by single individuals.We have measured the threshold level for the signal detection, by performing experiments with the calling signal at different intensities and analyzing the insect response by directionality tests performed on a group of male individuals. By using a sub-threshold signal and an acoustic Gaussian noise source, we have investigated the insect response for different levels of noise, finding behavioral activation for suitable noise intensities. In particular, the percentage of insects which react to the sub-threshold signal, shows a non-monotonic behavior, characterized by the presence of a maximum, for increasing levels of the noise intensity. This constructive interplay between external noise and calling signal is the signature of the non-dynamical stochastic resonance phenomenon. Finally, we describe the behavioral activation statistics by a soft threshold model which shows stochastic resonance. We find that the maximum of the ensemble average of the input-output cross-correlation occurs at a value of the noise intensity very close to that for which the behavioral response has a maximum.

Thin Film CIGS Solar Cells, Photovoltaic Modules, and the Problems of Modeling

Starting from the results regarding a nonvacuum technique to fabricate CIGS thin films for solar cells by means of single-step electrodeposition, we focus on the methodological problems of modeling at cell structure and photovoltaic module levels. As a matter of fact, electrodeposition is known as a practical alternative to costly vacuum-based technologies for semiconductor processing in the photovoltaic device sector, but it can lead to quite different structural and electrical properties. For this reason, a greater effort is required to ensure that the perspectives of the electrical engineer and the material scientist are given an opportunity for a closer comparison and a common language. Derived parameters from ongoing experiments have been used for simulation with the different approaches, in order to develop a set of tools which can be used to put together modeling both at single cell structure and complete module levels.

Recovery Capabilities of Rateless Codes on Simulated Turbulent Terrestrial Free Space Optics Channel Model

Free Space Optics (FSO) links are affected by several impairments: optical turbulence, scattering, absorption, and pointing. In particular, atmospheric optical turbulence generates optical power fluctuations at the receiver that can degrade communications with fading events, especially in high data rate links. Innovative solutions require an improvement of FSO link performances, together with testing models and appropriate channel codes. In this paper, we describe a high-resolution time-correlated channel model able to predict random temporal fluctuations of optical signal irradiance caused by optical turbulence. Concerning the same channel, we also report simulation results on the error mitigation performance of Luby Transform, Raptor, and RaptorQ codes.

Graded Carrier Concentration Absorber Profile for High Efficiency CIGS Solar Cells

We demonstrate an innovative CIGS-based solar cells model with a graded doping concentration absorber profile, capable of achieving high efficiency values. In detail, we start with an in-depth discussion concerning the parametrical study of conventional CIGS solar cells structures. We have used the wxAMPS software in order to numerically simulate cell electrical behaviour. By means of simulations, we have studied the variation of relevant physical and chemical parameters—characteristic of such devices—with changing energy gap and doping density of the absorber layer. Our results show that, in uniform CIGS cell, the efficiency, the open circuit voltage, and short circuit current heavily depend on CIGS band gap. Our numerical analysis highlights that the band gap value of 1.40 eV is optimal, but both the presence of Molybdenum back contact and the high carrier recombination near the junction noticeably reduce the crucial electrical parameters. For the above-mentioned reasons, we have demonstrated that the efficiency obtained by conventional CIGS cells is lower if compared to the values reached by our proposed graded carrier concentration profile structures (up to 21%).

Packet loss recovery in an indoor Free Space Optics link using rateless codes

Free Space Optics (FSO) systems present some important advantages if compared to Radio Frequency links, but they can be affected by several impairments that degrade the link quality and availability. In particular, due to temporary interruptions of the line-of-sight condition between the transmitter and the receiver, packet loss can occur during data transmission. In this work, we present an indoor Free Space Optics link, in which we have systematically generated interruptions of the beam. We demonstrate how the application of the most recent rateless codes, i.e., RaptorQ codes, can strongly improve the link quality by reducing packet loss. In particular, results show that the Packet Error Rate greatly decreases when employing RaptorQ codes. Finally, by choosing the most suitable encoding/decoding parameters, we can correctly recover all the lost packets, ensuring an error-free operation.

Design and development of a fNIRS system prototype based on SiPM detectors

Functional Near Infrared Spectroscopy (fNIRS) uses near infrared sources and detectors to measure changes in absorption due to neurovascular dynamics in response to brain activation. The use of Silicon Photomultipliers (SiPMs) in a fNIRS system has been estimated potentially able to increase the spatial resolution. Dedicated SiPM sensors have been designed and fabricated by using an optimized process. Electrical and optical characterizations are presented. The design and implementation of a portable fNIRS embedded system, hosting up to 64 IR-LED sources and 128 SiPM sensors, has been carried out. The system has been based on a scalable architecture whose elementary leaf is a flexible board with 16 SiPMs and 4 couples of LEDs each operating at two wavelengths. An ARM based microcontroller has been joined with a multiplexing interface, able to control power supply for the LEDs and collect data from the SiPMs in a time-sharing fashion and with configurable temporal slots. The system will be validated by using a phantom made by materials of different scattering and absorption indices layered to mimic a human head. A preliminary characterization of the optical properties of the single material composing the phantom has been performed using the SiPM in the diffuse radial reflectance measurement technique. The first obtained results confirm the high sensitivity of such kind of detector in the detection of weak light signal even at large distance between the light source and the detector.

Silicon Photomultipliers Signal-to-Noise Ratio in the Continuous Wave Regime

We report on signal-to-noise ratio measurements carried out in the continuous wave regime, at different bias voltages, frequencies, and temperatures, on a class of silicon photomultipliers fabricated in planar technology on silicon p-type substrate. Signal-to-noise ratio has been measured as the ratio of the photogenerated current, filtered and averaged by a lock-in amplifier, and the root mean square deviation of the same current. The measured noise takes into account the shot noise, resulting from the photocurrent and the dark current. We have also performed a comparison between our SiPMs and a photomultiplier tube in terms of signal-to-noise ratio, as a function of the temperature of the SiPM package and at different bias voltages. Our results show the outstanding performance of this class of SiPMs even without the need of any cooling system.

Parametrical study of multilayer structures for CIGS solar cells

In this paper, a numerical analysis of relevant electrical parameters of multilayer structures for CIGS-based solar cells was carried out, employing the simulation software wxAMPS. In particular, we have focused on thin film cells having a ZnO:Al/ZnO/CdS/CIGS structure with a Molybdenum back contact. The aim of this work is to establish good theoretical reference values for an ongoing experimental activity, where our technology of choice is the single-step electrodeposition. In detail, we have analyzed how the main electrical properties change with the bang gap and the thickness of the absorber layer, for such a type of solar cell structure. Our results show that both efficiency and fill factor strongly depend on the energy gap. Instead, the absorber thickness plays a role up to a few microns, after which the cell parameters remain almost constant. As expected, the theoretical peak efficiency was found for a band gap value of 1.40 eV, corresponding to a Ga/(In+Ga) ratio of 0.66.

Parametric Conversion in Micrometer and Submicrometer Structured Ferroelectric Crystals by Surface Poling

We report on recent technological improvements concerning nonlinear patterning of lithium niobate and lithium tantalate in the micrometer and submicrometer scales using surface periodic poling for ferroelectric domain inversion. The fabricated samples were employed for frequency doubling via quasiphase-matching both in bulk and guided wave geometries, including forward and backward configurations and wavelength conversion in bands C and L. We also investigated short-period quasiperiodic samples with randomly distributed mark-to-space ratios.