Mao-fu Sun

Identification of Amino Acids in the Factor XI Apple 3 Domain Required for Activation of Factor IX

Activated coagulation factor XI (factor XIa) proteolytically cleaves its substrate, factor IX, in an interaction requiring the factor XI A3 domain (Sun, Y., and Gailani, D. (1996)J. Biol. Chem. 271, 29023–29028). To identify key amino acids involved in factor IX activation, recombinant factor XIa proteins containing alanine substitutions for wild-type sequence were expressed in 293 fibroblasts and tested in a plasma clotting assay. Substitutions for Ile183–Val191 and Ser195–Ile197 at the N terminus and for Ser258–Ser264 at the C terminus of the A3 domain markedly decreased factor XI coagulant activity. The plasma protease prekallikrein is structurally homologous to factor XI, but activated factor IX poorly. A chimeric factor XIa molecule with the A3 domain replaced with A3 from prekallikrein (FXI/PKA3) activated factor IX with a K m 35-fold greater than that of wild-type factor XI. FXI/PKA3 was used as a template for a series of proteins in which prekallikrein A3 sequence was replaced with factor XI sequence to restore factor IX activation. Clotting and kinetics studies using these chimeras confirmed the results obtained with alanine mutants. Amino acids between Ile183 and Val191 are necessary for proper factor IX activation, but additional sequence between Ser195 and Ile197 or between Phe260and Ser265 is required for complete restoration of activation.

Characterization of a heparin binding site on the heavy chain of factor XI.

The glycosaminoglycan heparin enhances several reactions involving coagulation factor XI (FXI) including activation of FXI by factor XIIa, thrombin, and autoactivation; and inactivation of activated FXI (FXIa) by serine protease inhibitors. We examined the effect of heparin on inhibition of FXIa by the inhibitors C1-inhibitor (C1-INH) and antithrombin III (ATIII). Second order rate constants for inhibition in the absence of heparin were 1.57 × 103 and 0.91 × 103 m −1 s−1 for C1-INH and ATIII, respectively. Therapeutic heparin concentrations (0.1–1.0 units/ml) enhanced inhibition by ATIII 20–55-fold compared with 0.1–7.0-fold for C1-INH. For both inhibitors, the effect of heparin over a wide range of concentrations (10−1 to 105 units/ml) produced bell-shaped curves, demonstrating that inhibition occurs by a template mechanism requiring both inhibitor and protease to bind to heparin. This implies that FXI/XIa contains structural elements that interact with heparin. Human FXI contains a sequence of amino acids (R250-I-K-K-S-K) in the apple 3 domain of the heavy chain that binds heparin (Ho, D., Badellino, K., Baglia, F., and Walsh, P. (1998) J. Biol. Chem. 273, 16382–16390). To determine the importance of this sequence to heparin-mediated reactions, recombinant FXI molecules with alanine substitutions for basic amino acids were expressed in 293 fibroblasts, and tested in heparin-dependent assays. Inhibition of FXIa by ATIII in the presence of heparin was decreased 4-fold by alanine substitution at Lys253 (A253), with smaller effects noted for mutants A255 and A252. FXI undergoes autoactivation to FXIa in the presence of heparin. The rate of autoactivation was decreased substantially for A253 with modest decreases for A255 and A252. Substituting all four charged residues in the sequence resulted in a profound decrease in autoactivation, significantly greater than for any single substitution. Relative affinity for heparin was tested by determining the concentration of NaCl required to elute FXIa from heparin-Sepharose. Wild type FXIa eluted from the column at 320 mm NaCl, whereas FXIa with multiple substitutions (A252–254 or A250–255) eluted at 230 mm NaCl. All proteins with single substitutions in charged amino acids eluted at intermediate NaCl concentrations. The data indicate that FXI/XIa must bind to heparin for optimal inhibition by ATIII and for autoactivation. Lys253 is the most important amino acid involved in binding, and Lys255 and Lys252 also have roles in interactions with heparin.

Activation of factor XI by products of prothrombin activation

The prothrombinase complex converts prothrombin to α-thrombin through the intermediate meizothrombin (Mz-IIa). Both α-thrombin and Mz-IIa catalyze factor (F) XI activation to FXIa, which sustains α-thrombin production through activation of FIX. The interaction with FXI is thought to involve thrombin anion binding exosite (ABE) I. α-Thrombin can undergo additional proteolysis to β-thrombin and γ-thrombin, neither of which have an intact ABE I. In a purified protein system, FXI is activated by β-thrombin or γ-thrombin, and by α-thrombin in the presence of the ABE I-blocking peptide hirugen, indicating that a fully formed ABE I is not absolutely required for FXI activation. In a FXI-dependent plasma thrombin generation assay, β-thrombin, γ-thrombin, and α-thrombins with mutations in ABE I are approximately 2-fold more potent initiators of thrombin generation than α-thrombin or Mz-IIa, possibly because fibrinogen, which binds to ABE I, competes poorly with FXI for forms of thrombin lacking ABE I. In addition, FXIa can activate factor FXII, which could contribute to thrombin generation through FXIIa-mediated FXI activation. The data indicate that forms of thrombin other than α-thrombin contribute directly to feedback activation of FXI in plasma and suggest that FXIa may provide a link between tissue factor-initiated coagulation and the proteases of the contact system.

The Role of High Molecular Weight Kininogen and Prothrombin as Cofactors in the Binding of Factor XI A3 Domain to the Platelet Surface

We have reported that prothrombin (1 μm) is able to replace high molecular weight kininogen (45 nm) as a cofactor for the specific binding of factor XI to the platelet (Baglia, F. A., and Walsh, P. N. (1998) Biochemistry 37, 2271–2281). We have also determined that prothrombin fragment 2 binds to the Apple 1 domain of factor XI at or near the site where high molecular weight kininogen binds. A region of 31 amino acids derived from high molecular weight kininogen (HK31-mer) can also bind to factor XI (Tait, J. F., and Fujikawa, K. (1987) J. Biol. Chem. 262, 11651–11656). We therefore investigated the role of prothrombin fragment 2 and HK31-mer as cofactors in the binding of factor XI to activated platelets. Our experiments demonstrated that prothrombin fragment 2 (1 μm) or the HK31-mer (8 μm) are able to replace high molecular weight kininogen (45 nm) or prothrombin (1 μm) as cofactors for the binding of factor XI to the platelet. To localize the platelet binding site on factor XI, we used mutant full-length recombinant factor XI molecules in which the platelet binding site in the Apple 3 domain was altered by alanine scanning mutagenesis. The recombinant factor XI with alanine substitutions at positions Ser248, Arg250, Lys255, Leu257, Phe260, or Gln263 were defective in their ability to bind to activated platelets. Thus, the interaction of factor XI with platelets is mediated by the amino acid residues Ser248, Arg250, Lys255, Leu257, Phe260, and Gln263 within the Apple 3 domain.

Evidence for factor IX-independent roles for factor XIa in blood coagulation

Factor XIa is traditionally assigned a role in FIX activation during coagulation. However, recent evidence suggests this protease may have additional plasma substrates.

Characterization of a Heparin-Binding Site on the Catalytic Domain of Factor XIa: Mechanism of Heparin Acceleration of Factor XIa Inhibition by the Serpins Antithrombin and C1-Inhibitor†

Heparin accelerates inhibition of factor XIa (fXIa) by the serpins antithrombin (AT) and C1-inhibitor (C1-INH) by more than 2 orders of magnitude. The mechanism of the heparin-mediated acceleration of fXIa inhibition by these serpins is incompletely understood, as heparin appears to interact with both the catalytic and noncatalytic domains of the protease. We replaced the basic residues of the fXIa 170 loop (Lys-170, Arg-171, Arg-173, Lys-175, and Lys-179; chymotrypsin numbering) with Ala, using an expression system that allows separation of the fXIa catalytic domain (CD) from noncatalytic domains. Heparin-mediated inhibition of 170 loop CD variants with AT was impaired 3-10-fold relative to that of the wild-type (CD-WT). In reactions with C1-INH, Arg-171 was the most critical residue contributing approximately 2-3-fold to heparin-mediated inhibition of CD-WT. A template mechanism did not fully account for the effect of heparin with either serpin, as the second-order inhibition rate constants did not exhibit a characteristic bell-shaped dependence on heparin concentration. Further studies revealed that the C1-INH inhibition of full-length fXIa containing Ala substitutions for basic residues of the 148 loop is not enhanced by heparin. Inhibition by AT of a full-length fXIa variant containing an Ala substitution for Arg-37 in the fXIa CD was approximately 5-fold greater than for wild-type fXIa in the absence of heparin. These results suggest that basic residues of the fXIa 170 loop form a heparin-binding site and that the accelerating effect of heparin on inhibition of fXIa by AT or C1-INH may be mediated by charge neutralization and/or allosteric mechanisms that overcome the repulsive inhibitory interactions of serpins with basic residues on the fXIa 148 and 37 loops.

Characterization of Novel Forms of Coagulation Factor XIa: INDEPENDENCE OF FACTOR XIa SUBUNITS IN FACTOR IX ACTIVATION*

Factor XI is the zymogen of a dimeric plasma protease, factor XIa, with two active sites. In solution, and during contact activation in plasma, conversion of factor XI to factor XIa proceeds through an intermediate with one active site (1/2-FXIa). Factor XIa and 1/2-FXIa activate the substrate factor IX, with similar kinetic parameters in purified and plasma systems. During hemostasis, factor IX is activated by factors XIa or VIIa, by cleavage of the peptide bonds after Arg145 and Arg180. Factor VIIa cleaves these bonds sequentially, with accumulation of factor IXα, an intermediate cleaved after Arg145. Factor XIa also cleaves factor IX preferentially after Arg145, but little intermediate is detected. It has been postulated that the two factor XIa active sites cleave both factor IX peptide bonds prior to releasing factor IXaβ. To test this, we examined cleavage of factor IX by four single active site factor XIa proteases. Little intermediate formation was detected with 1/2-FXIa, factor XIa with one inhibited active site, or a recombinant factor XIa monomer. However, factor IXα accumulated during activation by the factor XIa catalytic domain, demonstrating the importance of the factor XIa heavy chain. Fluorescence titration of active site-labeled factor XIa revealed a binding stoichiometry of 1.9 ± 0.4 mol of factor IX/mol of factor XIa (Kd = 70 ± 40 nm). The results indicate that two forms of activated factor XI are generated during coagulation, and that each half of a factor XIa dimer behaves as an independent enzyme with respect to factor IX.

Exosite-mediated Substrate Recognition of Factor IX by Factor XIa THE FACTOR XIa HEAVY CHAIN IS REQUIRED FOR INITIAL RECOGNITION OF FACTOR IX

Studies of the mechanisms of blood coagulation zymogen activation demonstrate that exosites (sites on the activating complex distinct from the protease active site) play key roles in macromolecular substrate recognition. We investigated the importance of exosite interactions in recognition of factor IX by the protease factor XIa. Factor XIa cleavage of the tripeptide substrate S2366 was inhibited by the active site inhibitors p-aminobenzamidine (Ki 28 ± 2 μm) and aprotinin (Ki 1.13 ± 0.07 μm) in a classical competitive manner, indicating that substrate and inhibitor binding to the active site was mutually exclusive. In contrast, inhibition of factor XIa cleavage of S2366 by factor IX (Ki 224 ± 32 nm) was characterized by hyperbolic mixed-type inhibition, indicating that factor IX binds to free and S2366-bound factor XIa at exosites. Consistent with this premise, inhibition of factor XIa activation of factor IX by aprotinin (Ki 0.89 ± 0.52 μm) was non-competitive, whereas inhibition by active site-inhibited factor IXaβ was competitive (Ki 0.33 ± 0.05 μm). S2366 cleavage by isolated factor XIa catalytic domain was competitively inhibited by p-aminobenzamidine (Ki 38 ± 14 μm) but was not inhibited by factor IX, consistent with loss of factor IX-binding exosites on the non-catalytic factor XI heavy chain. The results support a model in which factor IX binds initially to exosites on the factor XIa heavy chain, followed by interaction at the active site with subsequent bond cleavage, and support a growing body of evidence that exosite interactions are critical determinants of substrate affinity and specificity in blood coagulation reactions.

Factor XI apple domains and protein dimerization

Summary.  The coagulation protease zymogen factor (F)XI is a disulfide bond‐linked homodimer, a configuration that is necessary for protein secretion and function. The non‐catalytic portion of the FXI polypeptide contains four repeats called apple domains (A1–A4). It is clear that FXI A4 plays a key role in dimer formation, however, the importance of other apple domains to this process has not been examined. We prepared recombinant FXI molecules in which apple domains were exchanged with those of the structurally homologous monomeric protein prekallikrein (PK). As expected, FXI/PK chimeras containing FXI A4 are dimers, while those with PK A4 are monomers. FXI A4 contains cysteine at position 321 that forms the interchain disulfide bond, while Cys321 in PK is unavailable for interchain bond formation because it is paired with Cys326. FXI/PK chimeras containing PK A4 were modified by changing Cys326 to glycine, leaving Cys321 unpaired (PKA4‐Gly326). FXI with a PK A4 domain is a monomer, however, introducing PKA4‐Gly326 results in a disulfide bond‐linked dimer. This indicates that dimer formation can occur in the absence of FXI A4. In proteins containing PKA4‐Gly326, replacing FXI A3 with PK A3 partially interferes with dimer formation, while substitution of A2, or A2 and A3 prevents dimer formation. PKA4‐Gly326 cannot induce the native PK molecule to dimerize. The data indicate that FXI A2 and A3 make contributions to dimer formation. As these domains are involved in activities that require dimeric protein, it seems reasonable that they stabilize this conformation.

Factor XI anion-binding sites are required for productive interactions with polyphosphate

Conversion of factor XI (FXI) to FXIa is enhanced by polymers of inorganic phosphate (polyP). This process requires FXI to bind to polyP. Each FXIa subunit contains anion‐binding sites (ABSs) on the apple 3 (A3) and catalytic domains that are required for normal heparin‐mediated enhancement of FXIa inhibition by antithrombin.