Marco Plomp

Imaging of viruses by atomic force microscopy

Atomic force microscopy (AFM) has been used to image a variety of virus particles in vitro and could, conceivably, be used as a useful diagnostic for their presence, their structural characterization and even their identification. Virus particles can be imaged by AFM in air, under alcohol or in physiological medium, and accurate measurements of their dimensions obtained. In addition, the appearance and organization of capsomere structures on their surfaces are frequently visible. A number of viruses and virus crystals have been imaged successfully using AFM and improvements in AFM technology and sample handling will undoubtedly increase even more its power, resolution and scope.

In vitro high-resolution structural dynamics of single germinating bacterial spores

Although significant progress has been achieved in understanding the genetic and biochemical bases of the spore germination process, the structural basis for breaking the dormant spore state remains poorly understood. We have used atomic force microscopy (AFM) to probe the high-resolution structural dynamics of single Bacillus atrophaeus spores germinating under native conditions. Here, we show that AFM can reveal previously unrecognized germination-induced alterations in spore coat architecture and topology as well as the disassembly of outer spore coat rodlet structures. These results and previous studies in other microorganisms suggest that the spore coat rodlets are structurally similar to amyloid fibrils. AFM analysis of the nascent surface of the emerging germ cell revealed a porous network of peptidoglycan fibers. The results are consistent with a honeycomb model structure for synthetic peptidoglycan oligomers determined by NMR. AFM is a promising experimental tool for investigating the morphogenesis of spore germination and cell wall peptidoglycan structure.

Characterization of Spores of Bacillus subtilis That Lack Most Coat Layers

Spores of Bacillus subtilis have a thick outer layer of relatively insoluble protein called the coat, which protects spores against a number of treatments and may also play roles in spore germination. However, elucidation of precise roles of the coat in spore properties has been hampered by the inability to prepare spores lacking all or most coat material. In this work, we show that spores of a strain with mutations in both the cotE and gerE genes, which encode proteins involved in coat assembly and expression of genes encoding coat proteins, respectively, lack most extractable coat protein as seen by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, as well as the great majority of the coat as seen by atomic force microscopy. However, the cotE gerE spores did retain a thin layer of insoluble coat material that was most easily seen by microscopy following digestion of these spores with lysozyme. These severely coat-deficient spores germinated relatively normally with nutrients and even better with dodecylamine but not with a 1:1 chelate of Ca(2+) and dipicolinic acid. These spores were also quite resistant to wet heat, to mechanical disruption, and to treatment with detergents at an elevated temperature and pH but were exquisitely sensitive to killing by sodium hypochlorite. These results provide new insight into the role of the coat layer in spore properties.

Rapid visualization at high resolution of pathogens by atomic force microscopy: Structural studies of herpes simplex virus-1

A relatively crude preparation of herpes simplex virus was rapidly visualized by atomic force microscopy after exposure to conditions that produced gradual degradation of the virions. Images were obtained of 1) the intact, enveloped virus; 2) the underlying capsid with associated tegument proteins along with fragments of the membrane; 3) the capsomeres composing the capsid and their surface arrangement; 4) damaged and partially degraded capsids with missing capsomeres; and 5) the DNA extruded from damaged virions. These images provide a unique perspective on the structures of individual virus particles. Atomic force microscopy can thus be used as a diagnostic tool to provide a rapid way to obtain high-resolution images of human pathogens from crude preparations. It is a useful technique that complements X-ray-based structure determination, cryo-electron microscopy techniques, and optical microscopies in the field of molecular pathogenesis.

Macromolecular crystal growth as revealed by atomic force microscopy

Direct visualization of macromolecular crystal growth using atomic force microscopy (AFM) has provided a powerful tool in the delineation of mechanisms and the kinetics of the growth process. It has further allowed us to evaluate the wide variety of impurities that are incorporated into crystals of proteins, nucleic acids, and viruses. We can, using AFM, image the defects and imperfections that afflict these crystals, the impurity layers that poison their surfaces, and the consequences of various factors on morphological development. All of these can be recorded under normal growth conditions, in native mother liquors, over time intervals ranging from minutes to days, and at the molecular level.

Atomic force microscopy applications in macromolecular crystallography

Atomic force microscopy (AFM) can be applied both in situ and ex situ to study the growth of crystals from solution. The method is particularly useful for investigating the crystallization of proteins, nucleic acids and viruses because it can be carried out in the mother liquor and in a non-perturbing fashion. Interactions and transformations between various growth mechanisms can be directly visualized as a function of supersaturation, as can the incorporation of diverse impurities and the formation and propagation of defects. Because the crystals can be observed over long periods, it is also possible to obtain precise quantitative measures of the kinetic parameters for nucleation and growth. Finally, AFM has allowed us to identify a number of previously unsuspected phenomena that influence nucleation, rate of growth and the ultimate perfection of macromolecular crystals. These are all features which are important in determining the ultimate resolution and quality of a crystals diffraction pattern.

Spore Coat Architecture of Clostridium novyi NT Spores

Spores of the anaerobic bacterium Clostridium novyi NT are able to germinate in and destroy hypoxic regions of tumors in experimental animals. Future progress in this area will benefit from a better understanding of the germination and outgrowth processes that are essential for the tumorilytic properties of these spores. Toward this end, we have used both transmission electron microscopy and atomic force microscopy to determine the structure of both dormant and germinating spores. We found that the spores are surrounded by an amorphous layer intertwined with honeycomb parasporal layers. Moreover, the spore coat layers had apparently self-assembled, and this assembly was likely to be governed by crystal growth principles. During germination and outgrowth, the honeycomb layers, as well as the underlying spore coat and undercoat layers, sequentially dissolved until the vegetative cell was released. In addition to their implications for understanding the biology of C. novyi NT, these studies document the presence of proteinaceous growth spirals in a biological organism.

A multistage pathway for human prion protein aggregation in vitro: from multimeric seeds to β-oligomers and nonfibrillar structures.

Aberrant protein aggregation causes numerous neurological diseases including Creutzfeldt-Jakob disease (CJD), but the aggregation mechanisms remain poorly understood. Here, we report AFM results on the formation pathways of β-oligomers and nonfibrillar aggregates from wild-type full-length recombinant human prion protein (WT) and an insertion mutant (10OR) with five additional octapeptide repeats linked to familial CJD. Upon partial denaturing, seeds consisting of 3-4 monomers quickly appeared. Oligomers of ~11-22 monomers then formed through direct interaction of seeds, rather than by subsequent monomer attachment. All larger aggregates formed through association of these β-oligomers. Although both WT and 10OR exhibited identical aggregation mechanisms, the latter oligomerized faster due to lower solubility and, hence, thermodynamic stability. This novel aggregation pathway has implications for prion diseases as well as others caused by protein aggregation.

Repair of impurity-poisoned protein crystal surfaces

The surface morphology of Bence–Jones protein (BJP) crystals was investigated during growth and dissolution by using in situ atomic force microscopy (AFM). It was shown that over a wide supersaturation range, impurities adsorb on the crystalline surface and ultimately form an impurity adsorption layer that prevents further growth of the crystal. At low undersaturations, this impurity adsorption layer prevents dissolution. At greater undersaturation, dissolution takes place around large particles incorporated into the crystal, leading to etch pits with impurity‐free bottoms. On restoration of supersaturation conditions, two‐dimensional nucleation takes place on the impurity‐free bottoms of these etch pits. After new growth layers fill in the etch pits, they cover the impurity‐poisoned top layer of the crystal face. This leads to the resumption of its growth. Formation of an impurity‐adsorption layer can explain the termination of growth of macromolecular crystals that has been widely noted. Growth‐dissolution‐growth cycles could be used to produce larger crystals that otherwise would have stopped growing because of impurity poisoning. Proteins 2003;50:486–495.

Architecture and Assembly of the Bacillus subtilis Spore Coat

Bacillus spores are encased in a multilayer, proteinaceous self-assembled coat structure that assists in protecting the bacterial genome from stresses and consists of at least 70 proteins. The elucidation of Bacillus spore coat assembly, architecture, and function is critical to determining mechanisms of spore pathogenesis, environmental resistance, immune response, and physicochemical properties. Recently, genetic, biochemical and microscopy methods have provided new insight into spore coat architecture, assembly, structure and function. However, detailed spore coat architecture and assembly, comprehensive understanding of the proteomic composition of coat layers, and specific roles of coat proteins in coat assembly and their precise localization within the coat remain in question. In this study, atomic force microscopy was used to probe the coat structure of Bacillus subtilis wild type and cotA, cotB, safA, cotH, cotO, cotE, gerE, and cotE gerE spores. This approach provided high-resolution visualization of the various spore coat structures, new insight into the function of specific coat proteins, and enabled the development of a detailed model of spore coat architecture. This model is consistent with a recently reported four-layer coat assembly and further adds several coat layers not reported previously. The coat is organized starting from the outside into an outermost amorphous (crust) layer, a rodlet layer, a honeycomb layer, a fibrous layer, a layer of “nanodot” particles, a multilayer assembly, and finally the undercoat/basement layer. We propose that the assembly of the previously unreported fibrous layer, which we link to the darkly stained outer coat seen by electron microscopy, and the nanodot layer are cotH- and cotE- dependent and cotE-specific respectively. We further propose that the inner coat multilayer structure is crystalline with its apparent two-dimensional (2D) nuclei being the first example of a non-mineral 2D nucleation crystallization pattern in a biological organism.