Mark G. Cantwell

An overview of toxicant identification in sediments and dredged materials

The identification of toxicants affecting aquatic benthic systems is critical to sound assessment and management of our nations waterways. Identification of toxicants can be useful in designing effective sediment remediation plans and reasonable options for sediment disposal. Knowledge of which contaminants affect benthic systems allows managers to link pollution to specific dischargers and prevent further release of toxicant(s). In addition, identification of major causes of toxicity in sediments may guide programs such as those developing environmental sediment guidelines and registering pesticides, while knowledge of the causes of toxicity which drive ecological changes such as shifts in benthic community structure would be useful in performing ecological risk assessments. To this end, the US Environmental Protection Agency has developed tools (toxicity identification and evaluation (TIE) methods) that allow investigators to characterize and identify chemicals causing acute toxicity in sediments and dredged materials. To date, most sediment TIEs have been performed on interstitial waters. Preliminary evidence from the use of interstitial water TIEs reveals certain patterns in causes of sediment toxicity. First, among all sediments tested, there is no one predominant cause of toxicity; metals, organics, and ammonia play approximately equal roles in causing toxicity. Second, within a single sediment there are multiple causes of toxicity detected; not just one chemical class is active. Third, the role of ammonia is very prominent in these interstitial waters. Finally, if sediments are divided into marine or freshwater, TIEs perforMed on interstitial waters from freshwater sediments indicate a variety of toxicants in fairly equal proportions, while TIEs performed on interstitial waters from marine sediments have identified only ammonia and organics as toxicants, with metals playing a minor role. Preliminary evidence from whole sediment TIEs indicates that organic compounds play a major role in the toxicity of marine sediments, with almost no evidence for either metal or ammonia toxicity. However, interpretation of these results may be skewed because only a small number of interstitial water (n = 13) and whole sediment (n = 5) TIEs have been completed. These trends may change as more data are collected.

Temporal trends of triclosan contamination in dated sediment cores from four urbanized estuaries: evidence of preservation and accumulation.

Triclosan is an antimicrobial agent added to a wide array of consumer goods and personal care products. Through its use, it is introduced into municipal sewer systems where it is only partially removed during wastewater treatment. In this study, triclosan was measured in dated sediment cores from four urbanized estuaries in order to reconstruct temporal and spatial trends of accumulation. Measurable concentrations of triclosan first appeared in each of the sediment cores near 1964, which corresponds with the US patent issuance date of triclosan. The presence of triclosan at each of the study sites at or near the patent date indicates that long-term preservation is occurring in estuarine sediments. Temporal trends of triclosan at each location are unique, reflecting between site variability. Concentrations at one site climbed to as high as 400ngg(-1), due in part, to local commercial production of triclosan. At two locations, levels of triclosan rise towards the surface of each core, suggesting increasing usage in recent years. One location adjacent to a major combined sewer overflow had high sediment concentrations of triclosan, confirming their potential as a source of triclosan to estuaries.

Dependency of polychlorinated biphenyl and polycyclic aromatic hydrocarbon bioaccumulation in Mya arenaria on both water column and sediment bed chemical activities.

The bioaccumulation of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) by the filter-feeding soft-shell clam Mya arenaria was evaluated at three sites near Boston (MA, USA) by assessing the chemical activities of those hydrophobic organic compounds (HOCs) in the sediment bed, water column, and organisms. Polyethylene samplers were deployed to measure the activities of HOCs in the water column. Sediment activities were assessed by normalizing concentrations with sediment-water sorption coefficient values, including adsorption to black carbon in addition to absorption by organic carbon. Likewise, both lipids and proteins were considered in biota-water partition coefficients used to estimate chemical activities in the animals. Chemical activities of PAHs in M. arenaria were substantially less than those of the corresponding bed sediments in which they lived. In contrast, chemical activities of PCBs in M. arenaria often were greater than or equal to activities in the corresponding bed sediments. Activities of PAHs, such those of pyrene, in the water column were undersaturated relative to the sediment. However, some PCBs, such as congener 52, had higher activities in the water column than in the sediment. Tissue activities of pyrene generally were in between the sediment and water column activities, whereas activity of PCB congener 52 was nearest to water column activities. These results suggest that attempts to estimate bioaccumulation by benthic organisms should include interactions with both the bed sediment and the water column.

The partitioning of Triclosan between aqueous and particulate bound phases in the Hudson River Estuary

The distribution of Triclosan within the Hudson River Estuary can be explained by a balance among the overall effluent inputs from municipal sewage treatment facilities, dilution of Triclosan concentrations in the water column with freshwater and seawater inputs, removal of Triclosan from the water column by adsorption to particles, and loss to photodegradation. This study shows that an average water column concentration of 3+/-2 ng/l (in the lower Hudson River Estuary) is consistent with an estimate for dilution of average wastewater concentrations with seawater and calculated rates of adsorption of Triclosan to particles. An average Triclosan sediment concentration of 26+/-11 ng/g would be in equilibrium with the overlying water column if Triclosan has a particle-to-water partitioning coefficient of k(d) approximately 10(4), consistent with laboratory estimates.

Use of powdered coconut charcoal as a toxicity identification and evaluation manipulation for organic toxicants in marine sediments

We report on a procedure using powdered coconut charcoal to sequester organic contaminants and reduce toxicity in sediments as part of a series of toxicity identification and evaluation (TIE) methods. Powdered coconut charcoal (PCC) was effective in reducing the toxicity of endosulfan-spiked sediments by 100%. Powdered coconut charcoal also was effective in removing almost 100% of the toxicity from two field sediments contaminated with polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs). Powdered coconut charcoal did not change the toxicity of ammonia or metal-spiked sediments; however, there was some quantitative reduction in the concentrations of free metals (element specific) in metal-spiked sediments. Powdered coconut charcoal is an effective, relatively specific method to sequester and remove toxicity from sediments contaminated with organic contaminants.

Removal of ammonia toxicity in marine sediment TIEs: a comparison of Ulva lactuca, zeolite and aeration methods

Toxicity Identification Evaluations (TIEs) can be used to determine the specific toxicant(s), including ammonia, causing toxicity observed in marine sediments. Two primary TIE manipulations are available for characterizing and identifying ammonia in marine sediments: Ulva lactuca addition and zeolite addition. In this study, we compared the efficacy of these methods to (1) remove NH(x) and NH(3) from overlying and interstitial waters and (2) reduce toxicity to the amphipod Ampelisca abdita and mysid Americamysis bahia using both spiked and environmentally contaminated sediments. The utility of aeration for removing NH(x) and NH(3) during a marine sediment TIE was also evaluated preliminarily. In general, the U. lactuca and zeolite addition methods performed similarly well at removing spiked NH(x) and NH(3) from overlying and interstitial waters compared to an unmanipulated sediment. Toxicity to the amphipod was reduced approximately the same by both methods. However, toxicity to the mysid was most effectively reduced by the U. lactuca addition indicating this method functions best with epibenthic species exposed to ammonia in the water column. Aeration removed NH(x) and NH(3) from seawater when the pH was adjusted to 10; however, very little ammonia was removed at ambient pHs ( approximately 8.0). This comparison demonstrates both U. lactuca and zeolite addition methods are effective TIE tools for reducing the concentrations and toxicity of ammonia in whole sediment toxicity tests.

Resuspension of contaminated field and formulated reference sediments Part I: Evaluation of metal release under controlled laboratory conditions

In aquatic systems where metal contaminated sediments are present, the potential exists for metals to be released to the water column when sediment resuspension occurs. The release and partitioning behavior of sediment-bound heavy metals is not well understood during resuspension events. In this study, the release of Cd, Cu, Hg, Ni, Pb and Zn from sediments during resuspension was evaluated using reference sediments with known physical and chemical properties. Sediment treatments with varying quantities of acid volatile sulfide (AVS), total organic carbon (TOC), and different grain size distributions were resuspended under controlled conditions to evaluate their respective effects on dissolved metal concentrations. AVS had the greatest effect on limiting release of dissolved metals, followed by grain size and TOC. Predictions of dissolved concentrations of Cd, Ni, Pb and Zn were developed based on the formulated sediment Sigma(metal)/AVS ratios with Sigma(metal) being the total sediment metal concentration. Predicted values were compared to measured dissolved metal concentrations in contaminated field sediments resuspended under identical operating conditions. Metal concentrations released from the field sediments were low overall, in most cases lower than predicted values, reflecting the importance of other binding phases. Overall, results indicate that for sulfidic sediments, low levels of the study metals are released to the dissolved phase during short-term resuspension.

Digestive bioavailability to a deposit feeder (Arenicola marina) of polycyclic aromatic hydrocarbons associated with anthropogenic particles

Marine sediments around urban areas serve as catch basins for anthropogenic particles containing polycyclic aromatic hydrocarbons (PAHs). Using incubations with gut fluids extracted from a deposit-feeding polychaete (Arenicola marina), we determined the digestive bioavailability of PAHs from fly ashes, coal dusts, diesel soots, tire tread materials, and urban particulates. We found that gut fluids solubilize significant concentrations of PAHs from two tire treads, two diesel soots, and the urban particulates. However, PAHs in fly ashes and coal dusts were not available to the digestive agents in gut fluid. Potential digestive exposure to PAHs is much greater than that predicted to be available from these materials using equilibrium partitioning theory (EqP). Amending an already-contaminated sediment with fly ash decreased phenanthrene solubilization by gut fluid. In contrast, addition of tire tread to the sediment resulted in increased solubilization of four PAHs by gut fluid. Therefore, addition of certain types of anthropogenic particles to sediments may result in an increase in bioavailable PAHs rather than a net decrease, as predicted by EqP. Difficulty in predicting the amount of change due to amendment may be due to interactions occurring among the mixture of compounds solubilized by gut fluid.

Stability and aggregation of silver and titanium dioxide nanoparticles in seawater: Role of salinity and dissolved organic carbon

The behavior and fate of nanoparticles (NPs) in the marine environment are largely unknown and potentially have important environmental and human health implications. The aggregation and fate of NPs in the marine environment are greatly influenced by their interactions with seawater and dissolved organic carbon (DOC). In the present study, the stability and aggregation of 30-nm-diameter silver nanoparticles (AgNPs) capped with citrate and polyvinylpyrrolidone (PVP; AgNP-citrate and AgNP-PVP) and 21-nm-diameter titanium dioxide (TiO(2)) NPs as affected by seawater salinity and DOC were investigated by measuring hydrodynamic diameters and zeta potentials. The added DOC (in humic acid form) stabilized the 3 types of NPs when the seawater salinities were ≤5 parts per thousand (ppt), but the stabilizing effect of DOC was reduced by a higher salinity (e.g., 30 ppt). In addition, AgNP-PVP was more stable than AgNP-citrate in seawater, indicating that surface capping agents and stabilization mechanisms govern the stability and aggregation of NPs. Statistical analysis showed that salinity is the most dominant influence on the stability and aggregation of AgNPs and TiO(2) NPs, followed by DOC. These findings expand our knowledge on the behavior of AgNPs and TiO2 NPs in seawater and indicate that the fate of these NPs will be primarily to aggregate in the water column, precipitate, and accumulate in sediments following release into the marine environment.

Effects of triclosan on marine benthic and epibenthic organisms

Triclosan is an antimicrobial compound that has been widely used in consumer products such as toothpaste, deodorant, and shampoo. Because of its widespread use, triclosan has been detected in various environmental media, including wastewater, sewage sludge, surface waters, and sediments. Triclosan is acutely toxic to numerous aquatic organisms, but very few studies have been performed on estuarine and marine benthic organisms. For whole sediment toxicity tests, the sediment-dwelling estuarine amphipod, Ampelisca abdita, and the epibenthic mysid shrimp, Americamysis bahia, are commonly used organisms. In the present study, median lethal concentration values (LC50) were obtained for both of these organisms using water-only and whole sediment exposures. Acute 96-h water-only toxicity tests resulted in LC50 values of 73.4 and 74.3 µg/L for the amphipod and mysid, respectively. For the 7-d whole sediment toxicity test, LC50 values were 303 and 257 mg/kg (dry wt) for the amphipod and mysid, respectively. Using equilibrium partitioning theory, these whole sediment values are equivalent to interstitial water LC50 values of 230 and 190 µg/L for the amphipod and mysid, respectively, which are within a threefold difference of the observed 96-h LC50 water-only values. Triclosan was found to accumulate in polychaete tissue in a 28-d bioaccumulation study with a biota-sediment accumulation factor of 0.23 kg organic carbon/kg lipid. These data provide some of the first toxicity data for triclosan with marine benthic and epibenthic species while also indicating a need to better understand the effects of other forms of sediment carbon, triclosan ionization, and organism metabolism of triclosan on the chemicals behavior and toxicity in the aquatic environment.