Robert M. Burgess

Effects of sample preparation on the measurement of organic carbon, hydrogen, nitrogen, sulfur, and oxygen concentrations in marine sediments

The elemental composition of marine sediment provides useful information for the study of environmental processes including biogeochemical cycling and contaminant partitioning. It is common practice to acidify marine sediment samples to remove carbonate before measuring the concentrations of organic carbon (C). To date, however the effects of acidification on the concentrations of hydrogen (H), nitrogen (N), sulfur (S) and oxygen (O) in marine sediments have not been explicitly addressed. Acidification may contaminate or alter the sediment samples and create experimental artifacts affecting the validity of resulting H/C, C/N and O/C ratios. The objective of this study was to quantify how various preparation techniques affect the measured concentrations of C, H, N, S and O in marine sediments. Effects of four different pretreatments: unacidified (whole), acidification by HCl vapor, acidification by direct addition of HCl, and combustion were evaluated using five marine sediments and a standard reference material. The magnitude of carbonate loss between the vapor and direct acidification treatments was evaluated using stable C isotope analysis. Carbonates were most effectively removed by direct addition of HCl; and our results agree with findings of other studies which found direct addition of HCl to be the most accurate method for measuring organic C. However, the acid treatments elevated the apparent concentration of H and O; and in a few cases concentrations of N and S were significantly affected by acidification. In general, combustion significantly reduced all elemental concentrations compared to the whole sample. Based on these results, we recommend analysis of the untreated whole sediment for determining N, H, O, and S.

An overview of toxicant identification in sediments and dredged materials

The identification of toxicants affecting aquatic benthic systems is critical to sound assessment and management of our nations waterways. Identification of toxicants can be useful in designing effective sediment remediation plans and reasonable options for sediment disposal. Knowledge of which contaminants affect benthic systems allows managers to link pollution to specific dischargers and prevent further release of toxicant(s). In addition, identification of major causes of toxicity in sediments may guide programs such as those developing environmental sediment guidelines and registering pesticides, while knowledge of the causes of toxicity which drive ecological changes such as shifts in benthic community structure would be useful in performing ecological risk assessments. To this end, the US Environmental Protection Agency has developed tools (toxicity identification and evaluation (TIE) methods) that allow investigators to characterize and identify chemicals causing acute toxicity in sediments and dredged materials. To date, most sediment TIEs have been performed on interstitial waters. Preliminary evidence from the use of interstitial water TIEs reveals certain patterns in causes of sediment toxicity. First, among all sediments tested, there is no one predominant cause of toxicity; metals, organics, and ammonia play approximately equal roles in causing toxicity. Second, within a single sediment there are multiple causes of toxicity detected; not just one chemical class is active. Third, the role of ammonia is very prominent in these interstitial waters. Finally, if sediments are divided into marine or freshwater, TIEs perforMed on interstitial waters from freshwater sediments indicate a variety of toxicants in fairly equal proportions, while TIEs performed on interstitial waters from marine sediments have identified only ammonia and organics as toxicants, with metals playing a minor role. Preliminary evidence from whole sediment TIEs indicates that organic compounds play a major role in the toxicity of marine sediments, with almost no evidence for either metal or ammonia toxicity. However, interpretation of these results may be skewed because only a small number of interstitial water (n = 13) and whole sediment (n = 5) TIEs have been completed. These trends may change as more data are collected.

Effect-directed analysis supporting monitoring of aquatic environments — An in-depth overview

Aquatic environments are often contaminated with complex mixtures of chemicals that may pose a risk to ecosystems and human health. This contamination cannot be addressed with target analysis alone but tools are required to reduce this complexity and identify those chemicals that might cause adverse effects. Effect-directed analysis (EDA) is designed to meet this challenge and faces increasing interest in water and sediment quality monitoring. Thus, the present paper summarizes current experience with the EDA approach and the tools required, and provides practical advice on their application. The paper highlights the need for proper problem formulation and gives general advice for study design. As the EDA approach is directed by toxicity, basic principles for the selection of bioassays are given as well as a comprehensive compilation of appropriate assays, including their strengths and weaknesses. A specific focus is given to strategies for sampling, extraction and bioassay dosing since they strongly impact prioritization of toxicants in EDA. Reduction of sample complexity mainly relies on fractionation procedures, which are discussed in this paper, including quality assurance and quality control. Automated combinations of fractionation, biotesting and chemical analysis using so-called hyphenated tools can enhance the throughput and might reduce the risk of artifacts in laboratory work. The key to determining the chemical structures causing effects is analytical toxicant identification. The latest approaches, tools, software and databases for target-, suspect and non-target screening as well as unknown identification are discussed together with analytical and toxicological confirmation approaches. A better understanding of optimal use and combination of EDA tools will help to design efficient and successful toxicant identification studies in the context of quality monitoring in multiply stressed environments.

Passive sampling methods for contaminated sediments: Practical guidance for selection, calibration, and implementation

This article provides practical guidance on the use of passive sampling methods (PSMs) that target the freely dissolved concentration (Cfree) for improved exposure assessment of hydrophobic organic chemicals in sediments. Primary considerations for selecting a PSM for a specific application include clear delineation of measurement goals for Cfree, whether laboratory-based “ex situ” and/or field-based “in situ” application is desired, and ultimately which PSM is best-suited to fulfill the measurement objectives. Guidelines for proper calibration and validation of PSMs, including use of provisional values for polymer–water partition coefficients, determination of equilibrium status, and confirmation of nondepletive measurement conditions are defined. A hypothetical example is described to illustrate how the measurement of Cfree afforded by PSMs reduces uncertainty in assessing narcotic toxicity for sediments contaminated with polycyclic aromatic hydrocarbons. The article concludes with a discussion of future research that will improve the quality and robustness of Cfree measurements using PSMs, providing a sound scientific basis to support risk assessment and contaminated sediment management decisions. Integr Environ Assess Manag 2014;10:210–223.

Temporal trends of triclosan contamination in dated sediment cores from four urbanized estuaries: evidence of preservation and accumulation.

Triclosan is an antimicrobial agent added to a wide array of consumer goods and personal care products. Through its use, it is introduced into municipal sewer systems where it is only partially removed during wastewater treatment. In this study, triclosan was measured in dated sediment cores from four urbanized estuaries in order to reconstruct temporal and spatial trends of accumulation. Measurable concentrations of triclosan first appeared in each of the sediment cores near 1964, which corresponds with the US patent issuance date of triclosan. The presence of triclosan at each of the study sites at or near the patent date indicates that long-term preservation is occurring in estuarine sediments. Temporal trends of triclosan at each location are unique, reflecting between site variability. Concentrations at one site climbed to as high as 400ngg(-1), due in part, to local commercial production of triclosan. At two locations, levels of triclosan rise towards the surface of each core, suggesting increasing usage in recent years. One location adjacent to a major combined sewer overflow had high sediment concentrations of triclosan, confirming their potential as a source of triclosan to estuaries.

Mechanistic sediment quality guidelines based on contaminant bioavailability: Equilibrium partitioning sediment benchmarks

Globally, estimated costs to manage (i.e., remediate and monitor) contaminated sediments are in the billions of U.S. dollars. Biologically based approaches for assessing the contaminated sediments which pose the greatest ecological risk range from toxicity testing to benthic community analysis. In addition, chemically based sediment quality guidelines (SQGs) provide a relatively inexpensive line of evidence for supporting these assessments. The present study summarizes a mechanistic SQG based on equilibrium partitioning (EqP), which uses the dissolved concentrations of contaminants in sediment interstitial waters as a surrogate for bioavailable contaminant concentrations. The EqP-based mechanistic SQGs are called equilibrium partitioning sediment benchmarks (ESBs). Sediment concentrations less than or equal to the ESB values are not expected to result in adverse effects and benthic organisms should be protected, while sediment concentrations above the ESB values may result in adverse effects to benthic organisms. In the present study, ESB values are reported for 34 polycyclic aromatic hydrocarbon, 32 other organic contaminants, and seven metals (cadmium, chromium, copper, nickel, lead, silver, zinc). Also included is an overview of EqP theory, ESB derivation, examples of applying ESB values, and considerations when using ESBs. The ESBs are intended as a complement to existing sediment-assessment tools, to assist in determining the extent of sediment contamination, to help identify chemicals causing toxicity, and to serve as targets for pollutant loading control measures.

Effects-directed analysis (EDA) and toxicity identification evaluation (TIE): Complementary but different approaches for diagnosing causes of environmental toxicity.

Currently, 2 approaches are available for performing environmental diagnostics on samples like municipal and industrial effluents, interstitial waters, and whole sediments to identify anthropogenic contaminants causing toxicological effects. One approach is toxicity identification evaluation (TIE), which was developed primarily in North America to determine active toxicants to whole-organism endpoints. The second approach is effects-directed analysis (EDA), which has origins in both Europe and North America. Unlike TIE, EDA uses primarily in vitro endpoints with an emphasis on organic contaminants as the cause of observed toxicity. The 2 approaches have fundamental differences that make them distinct techniques. In EDA, the sophisticated and elegant fractionation and chemical analyses performed to identify the causes of toxicity with a high degree of specificity often compromise contaminant bioavailability. In contrast, in TIE, toxicant bioavailability is maintained and is considered critical to accurately identifying the causes of environmental toxicity. However, maintaining contaminant bioavailability comes with the cost of limiting, at least until recently, the use of the types of sophisticated fractionation and elegant chemical analyses that have resulted in the high specificity of toxicant diagnosis performed in EDA. The present study provides an overview of each approach and highlights areas where the 2 approaches can complement one another and lead to the improvement of both.

Dependency of polychlorinated biphenyl and polycyclic aromatic hydrocarbon bioaccumulation in Mya arenaria on both water column and sediment bed chemical activities.

The bioaccumulation of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) by the filter-feeding soft-shell clam Mya arenaria was evaluated at three sites near Boston (MA, USA) by assessing the chemical activities of those hydrophobic organic compounds (HOCs) in the sediment bed, water column, and organisms. Polyethylene samplers were deployed to measure the activities of HOCs in the water column. Sediment activities were assessed by normalizing concentrations with sediment-water sorption coefficient values, including adsorption to black carbon in addition to absorption by organic carbon. Likewise, both lipids and proteins were considered in biota-water partition coefficients used to estimate chemical activities in the animals. Chemical activities of PAHs in M. arenaria were substantially less than those of the corresponding bed sediments in which they lived. In contrast, chemical activities of PCBs in M. arenaria often were greater than or equal to activities in the corresponding bed sediments. Activities of PAHs, such those of pyrene, in the water column were undersaturated relative to the sediment. However, some PCBs, such as congener 52, had higher activities in the water column than in the sediment. Tissue activities of pyrene generally were in between the sediment and water column activities, whereas activity of PCB congener 52 was nearest to water column activities. These results suggest that attempts to estimate bioaccumulation by benthic organisms should include interactions with both the bed sediment and the water column.

Use of powdered coconut charcoal as a toxicity identification and evaluation manipulation for organic toxicants in marine sediments

We report on a procedure using powdered coconut charcoal to sequester organic contaminants and reduce toxicity in sediments as part of a series of toxicity identification and evaluation (TIE) methods. Powdered coconut charcoal (PCC) was effective in reducing the toxicity of endosulfan-spiked sediments by 100%. Powdered coconut charcoal also was effective in removing almost 100% of the toxicity from two field sediments contaminated with polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs). Powdered coconut charcoal did not change the toxicity of ammonia or metal-spiked sediments; however, there was some quantitative reduction in the concentrations of free metals (element specific) in metal-spiked sediments. Powdered coconut charcoal is an effective, relatively specific method to sequester and remove toxicity from sediments contaminated with organic contaminants.

Removal of ammonia toxicity in marine sediment TIEs: a comparison of Ulva lactuca, zeolite and aeration methods

Toxicity Identification Evaluations (TIEs) can be used to determine the specific toxicant(s), including ammonia, causing toxicity observed in marine sediments. Two primary TIE manipulations are available for characterizing and identifying ammonia in marine sediments: Ulva lactuca addition and zeolite addition. In this study, we compared the efficacy of these methods to (1) remove NH(x) and NH(3) from overlying and interstitial waters and (2) reduce toxicity to the amphipod Ampelisca abdita and mysid Americamysis bahia using both spiked and environmentally contaminated sediments. The utility of aeration for removing NH(x) and NH(3) during a marine sediment TIE was also evaluated preliminarily. In general, the U. lactuca and zeolite addition methods performed similarly well at removing spiked NH(x) and NH(3) from overlying and interstitial waters compared to an unmanipulated sediment. Toxicity to the amphipod was reduced approximately the same by both methods. However, toxicity to the mysid was most effectively reduced by the U. lactuca addition indicating this method functions best with epibenthic species exposed to ammonia in the water column. Aeration removed NH(x) and NH(3) from seawater when the pH was adjusted to 10; however, very little ammonia was removed at ambient pHs ( approximately 8.0). This comparison demonstrates both U. lactuca and zeolite addition methods are effective TIE tools for reducing the concentrations and toxicity of ammonia in whole sediment toxicity tests.