Mark J. Wihl

A novel approach: high resolution inspection with wafer plane defect detection

High Resolution reticle inspection is well-established as a proven, effective, and efficient means of detecting yield-limiting mask defects as well as defects which are not immediately yield-limiting yet can enable manufacturing process improvements. Historically, RAPID products have enabled detection of both classes of these defects. The newly-developed Wafer Plane Inspection (WPI) detector technology meets the needs of some advanced mask manufacturers to identify the lithographically-significant defects while ignoring the other non-lithographically-significant defects. Wafer Plane Inspection accomplishes this goal by performing defect detection based on a modeled image of how the mask features would actually print in the photoresist. This has the effect of reducing sensitivity to non-printing defects while enabling higher sensitivity focused in high MEEF areas where small reticle defects still yield significant printing defects on wafers. WPI is a new inspection mode that has been developed by KLA-Tencor and is currently under test with multiple customers. It employs the same transmitted and reflected-light high-resolution images as the industry-standard high-resolution inspections, but with much more sophisticated processing involved. A rigorous mask pattern recovery algorithm is used to convert the transmitted and reflected light images into a modeled representation of the reticle. Lithographic modeling of the scanner is then used to generate an aerial image of the mask. This is followed by resist modeling to determine the exposure of the photoresist. The defect detectors are then applied on this photoresist plane so that only printing defects are detected. Note that no hardware modifications to the inspection system are required to enable this detector. The same tool will be able to perform both our standard High Resolution inspections and the Wafer Plane Inspection detector. This approach has several important features. The ability to ignore non-printing defects and to apply additional effective sensitivity in high MEEF areas enables advanced node development. In addition, the modeling allows the inclusion of important polarization effects that occur in the resist for high NA operation. This allows for the results to better match wafer print results compared to alternate approaches. Finally, the simulation easily allows for the application of arbitrary illumination profiles. With this approach, users of WPI can make use of unique or custom scanner illumination profiles. This allows the more precise modeling of profiles without inspection system hardware modification or loss of company intellectual property. This paper examines WPI in Die:Die mode. Future work includes a review of Die:Database WPI capability.

SMO Photomask Inspection in the Lithographic Plane

Source Mask Optimization (SMO) describes the co-optimization of the illumination source and mask pattern in the frequency domain. While some restrictions for manufacturable sources and masks are included in the process, the resulting photomasks do not resemble the initial designs. Some common features of SMO masks are that the line edges are heavily fragmented, the minimum design features are small and there is no one-to-one correspondence between design and mask features. When it is not possible to link a single mask feature directly to its resist counterpart, traditional concepts of mask defects no longer apply and photomask inspection emerges as a significant challenge. Aerial Plane Inspection (API) is a lithographic inspection mode that moves the detection of defects to the lithographic plane. They can be deployed to study the lithographic impact of SMO mask defects. This paper briefly reviews SMO and the lithography inspection technologies and explores their applicability to 22nm designs by presenting SMO mask inspection results. These results are compared to simulated wafer print expectations.

High resolution inspection with wafer plane die: database defect detection

High Resolution reticle inspection is well-established as a proven, effective, and efficient means of detecting yieldlimiting mask defects as well as defects which are not immediately yield-limiting yet can enable manufacturing process improvements. Historically, RAPID products have enabled detection of both classes of these defects. The newlydeveloped Wafer Plane Inspection (WPI) detector technology meets the needs of some advanced mask manufacturers to identify the lithographically-significant defects while ignoring the other non-lithographically-significant defects. Wafer Plane Inspection accomplishes this goal by performing defect detection based on a modeled image of how the mask features would actually print in the photoresist. This has the effect of reducing sensitivity to non-printing defects while enabling higher sensitivity focused in high MEEF areas where small reticle defects still yield significant printing defects on wafers. This approach has several important features. The ability to ignore non-printing defects and to apply additional effective sensitivity in high MEEF areas enables advanced node development. In addition, the modeling allows the inclusion of important polarization effects that occur in the resist for high NA operation. This allows for the results to better match wafer print results compared to alternate approaches. Finally, the simulation easily allows for the application of arbitrary illumination profiles. With this approach, users of WPI can make use of unique or custom scanner illumination profiles. This allows the more precise modeling of profiles without inspection system hardware modification or loss of company intellectual property. A previous paper [1] introduced WPI in D:D mode. This paper examines the operation and results for WPI in Die:Database mode.

Phase defect inspection of 130-nm node phase-shift masks using a simultaneous transmitted and reflected light pattern inspection algorithm

Phase shifting mask technology will be necessary to product integrated circuits at the 130 nm node using KrF wavelength steppers. In order to successfully accomplish this goal, it is necessary to detect and repair phase shifting defects that may occur in the manufacture of these reticles. An inspection algorithm has been developed to improve the phase shift defect detection rate of an UV reticle inspection system and is based upon the simultaneous use of the transmitted and reflected light signals. This paper describes the phase defect sensitivity improvement over transmitted light only pattern inspection results and simultaneous transmitted and reflected light based contamination inspection results.