Markus Heyde

The Atomic Structure of a Metal-Supported Vitreous Thin Silica Film**

Clear as glass: The atomic structure of a metal-supported vitreous thin silica film was resolved using low-temperature scanning tunneling microscopy (STM). Based on the STM image, a model was constructed and the atomic arrangement of the thin silica glass determined (see picture). The total pair correlation function of the structural model shows good agreement with diffraction experiments performed on vitreous silica.

Dynamic plowing nanolithography on polymethylmethacrylate using an atomic force microscope

We present dynamic plowing nanolithography on polymethylmethacrylate films, performed with a scan-linearized atomic force microscope able to scan up to 250 μm with high resolution. Modifications of the surface are obtained by plastically indenting the film surface with a vibrating tip. By changing the oscillation amplitude of the cantilever, i.e., the indentation depth, surfaces can be either imaged or modified. A program devoted to the control of the scanning process is also presented. The software basically converts the gray scale of pixel images into voltages used to control the dither piezo driving cantilever oscillations. The advantages of our experimental setup and the dependence of lithography efficiency on scanning parameters are discussed. Some insights into the process of surface modifications are presented.

Measuring the Charge State of Point Defects on MgO/Ag(001)

A detailed understanding of surface defects is highly desirable, e.g. to clarify their role as active sites in catalysis. Here localized defects on the surface of MgO films deposited on Ag(001) are investigated. Since the electronic structure of color centers depends on their local position, spectroscopic signals are highly convoluted and often difficult to disentangle. In this study we aimed to obtain morphological and spectroscopic information on single color centers at a microscopic level with frequency modulated dynamic force microscopy (FM-DFM) and scanning tunneling microscopy (STM) in an ultrahigh vacuum and at low temperature. Four of the major and in literature mostly discussed defect types on MgO have been characterized by their charge state and finally identified by the complementary application of FM-DFM and STM in combination with density functional theory results.

Thin silica films on Ru(0001): monolayer, bilayer and three-dimensional networks of [SiO4] tetrahedra

The atomic structure of thin silica films grown over a Ru(0001) substrate was studied by X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, low energy electron diffraction, helium ion scattering spectroscopy, CO temperature programmed desorption, and scanning tunneling microscopy in combination with density functional theory calculations. The films were prepared by Si vapor deposition and subsequent oxidation at high temperatures. The silica film first grows as a monolayer of corner-sharing [SiO(4)] tetrahedra strongly bonded to the Ru(0001) surface through the Si-O-Ru linkages. At increasing amounts of Si, the film forms a bilayer of corner-sharing [SiO(4)] tetrahedra which is weakly bonded to Ru(0001). The bilayer film can be grown in either the crystalline or vitreous state, or both coexisting. Further increasing the film thickness leads to the formation of vitreous silica exhibiting a three-dimensional network of [SiO(4)]. The principal structure of the films can be monitored by infrared spectroscopy, as each structure shows a characteristic vibrational band, i.e., ∼1135 cm(-1) for a monolayer film, ∼1300 cm(-1) for the bilayer structures, and ∼1250 cm(-1) for the bulk-like vitreous silica.

Cognitive factors can influence self-motion perception (vection) in virtual reality

Research on self-motion perception and simulation has traditionally focused on the contribution of physical stimulus properties (“bottom-up factors”) using abstract stimuli. Here, we demonstrate that cognitive (“top-down”) mechanisms like ecological relevance and presence evoked by a virtual environment can also enhance visually induced self-motion illusions (vection). In two experiments, naive observers were asked to rate presence and the onset, intensity, and convincingness of circular vection induced by different rotating visual stimuli presented on a curved projection screen (FOV: 54° × 45°). Globally consistent stimuli depicting a natural 3D scene proved more effective in inducing vection and presence than inconsistent (scrambled) or unnatural (upside-down) stimuli with similar physical stimulus properties. Correlation analyses suggest a direct relationship between spatial presence and vection. We propose that the coherent pictorial depth cues and the spatial reference frame evoked by the naturalistic environment increased the believability of the visual stimulus, such that it was more easily accepted as a stable “scene” with respect to which visual motion is more likely to be judged as self-motion than object motion. This work extends our understanding of mechanisms underlying self-motion perception and might thus help to improve the effectiveness and believability of virtual reality applications.

Driving in the Future: Temporal Visuomotor Adaptation and Generalization

Rapid and accurate visuomotor coordination requires tight spatial and temporal sensorimotor synchronization. The introduction of a sensorimotor or intersensory misalignment (either spatial or temporal) impairs performance on most tasks. For more than a century, it has been known that a few minutes of exposure to a spatial misalignment can induce a recalibration of sensorimotor spatial relationships, a phenomenon that may be referred to as spatial visuomotor adaptation. Here, we use a high-fidelity driving simulator to demonstrate that the sensorimotor system can adapt to temporal misalignments on very complex tasks, a phenomenon that we refer to as temporal visuomotor adaptation. We demonstrate that adapting on a single street produces an adaptive state that generalizes to other streets. This shows that temporal visuomotor adaptation is not specific to a single visuomotor transformation, but generalizes across a class of transformations. Temporal visuomotor adaptation is strikingly parallel to spatial visuomotor adaptation, and has strong implications for the understanding of visuomotor coordination and intersensory integration.

Au dimers on thin MgO(001) films: flat and charged or upright and neutral?

A combination of low temperature scanning tunneling microscopy (STM) and theoretical calculations is used to investigate Au dimers, supported on thin MgO(001) films, whose thickness was chosen such that charge transfer from the Ag substrate to the deposited Au is possible. Au dimers exist not only in an upright geometry--as theoretically predicted to be the most stable configuration--but also as flat lying dimers which populate a manifold of different azimuthal orientations. Apart from the difference in adsorption configurations, these two isomers exhibit rather different electronic structures: while upright dimers are neutral, flat ones are charged.

Combined low-temperature scanning tunneling/atomic force microscope for atomic resolution imaging and site-specific force spectroscopy.

We present the design and first results of a low-temperature, ultrahigh vacuum scanning probe microscope enabling atomic resolution imaging in both scanning tunneling microscopy (STM) and noncontact atomic force microscopy (NC-AFM) modes. A tuning-fork-based sensor provides flexibility in selecting probe tip materials, which can be either metallic or nonmetallic. When choosing a conducting tip and sample, simultaneous STM/NC-AFM data acquisition is possible. Noticeable characteristics that distinguish this setup from similar systems providing simultaneous STM/NC-AFM capabilities are its combination of relative compactness (on-top bath cryostat needs no pit), in situ exchange of tip and sample at low temperatures, short turnaround times, modest helium consumption, and unrestricted access from dedicated flanges. The latter permits not only the optical surveillance of the tip during approach but also the direct deposition of molecules or atoms on either tip or sample while they remain cold. Atomic corrugations as low as 1 pm could successfully be resolved. In addition, lateral drifts rates of below 15 pm/h allow long-term data acquisition series and the recording of site-specific spectroscopy maps. Results obtained on Cu(111) and graphite illustrate the microscopes performance.

Probing adsorption sites on thin oxide films by dynamic force microscopy

Site specific atomically resolved dynamic force spectroscopy measurements were performed on a thin MgO film grown on Ag(001). The microscope is operated in ultrahigh vacuum at low temperature to ensure defined imaging condition, high stability, and drift reduction. Atomically resolved dynamic force microscopy images have been combined with site specific frequency shift versus distance measurements. The frequency shift is measured as a function of z and the lateral displacement. With these measurement characteristics the authors are currently probing inequivalent surface sites on thin MgO films to extract atomic-scale information on surface chemical reactivity and possible adsorption sites for metal atoms and small clusters.

Visual cues can be sufficient for triggering automatic, reflexlike spatial updating

“Spatial updating” refers to the process that automatically updates our egocentric mental representation of our immediate surround during self-motions, which is essential for quick and robust spatial orientation. To investigate the relative contribution of visual and vestibular cues to spatial updating, two experiments were performed in a high-end Virtual Reality system. Participants were seated on a motion platform and saw either the surrounding room or a photorealistic virtual model presented via head-mounted display or projection screen. After upright rotations, participants had to point “as accurately and quickly as possibl ” to previously learned targets that were outside of the current field of view (FOV). Spatial updating performance, quantified as response time, configuration error, and pointing error, was comparable in the real and virtual reality conditions when the FOV was matched. Two further results challenge the prevailing basic assumptions about spatial updating: First, automatic, reflexlike spatial updating occurred without any physical motion, i.e., visual information from a known scene alone can, indeed, be sufficient, especially for large FOVs. Second, continuous-motion information is not, in fact, mandatory for spatial updating---merely presenting static images of new orientations proved sufficient, which motivated our distinction between continuous and instant-based spatial updating.