Masazumi Hasegawa

Separation of proteins by hydrophobic interaction chromatography at low salt concentration.

We investigated protein separation by hydrophobic interaction chromatography (HIC) at low salt concentration on the supports of various hydrophobicities. Hydrophobic proteins could be successfully separated with more than 90% recovery by gradient elution of ammonium sulfate from 0.3-0.5 M to 0 in 50 mM phosphate buffer (pH 6.8) by using supports whose hydrophobicities were properly adjusted individually for each protein. Satisfactory results were also obtained by isocratic elution without ammonium sulfate and gradient elution of ethanol from 0 to 10%. HIC at low salt concentration was compatible with other modes of liquid chromatography like ion-exchange chromatography. On the other hand, it was not successful to separate hydrophilic proteins at low salt concentration. Recoveries of hydrophilic proteins decreased before they were retained enough as support hydrophobicity increased. Therefore, it is inevitable to use a higher concentration of salt, e.g., 1-2 M ammonium sulfate, on hydrophilic or moderately hydrophobic support in order to retain hydrophilic proteins without decrease in recovery.

Characterization of p-aminobenzamidine-based sorbent and its use for high-performance affinity chromatography of trypsin-like proteases

An affinity sorbent, hydrophilic polymer-based carrier of different pore size (Toyopearl) with immobilized p-aminobenzamidine (ABA), has been prepared. Its basic properties and some applications for protein purification were studied. ABA, which is a synthetic inhibitor for trypsin-like proteases, was covalently immobilized to Toyopearl by reductive amination. The ligand density and binding capacity for porcine trypsin varied depending on the pore size of Toyopearl. The maximum binding capacity of the immobilized p-aminobenzamidine Toyopearl (ABA-Toyopearl) for trypsin was more than 40 mg/ml gel. ABA-Toyopearl thus obtained was very stable below pH 8 and was successfully used for high-performance affinity chromatography of trypsin-like proteases such as trypsin, thrombin, tissue-type plasminogen activator or urokinase in a single step at 25 degrees C.

Hydrophobicity gradient columns for the separation of trypsin inhibitor by hydrophobic interaction chromatography at low salt concentration

We investigated hydrophobicity gradient columns composed of two columns packed with supports of different hydrophobicities in order to save time in protein separation by hydrophobic interaction chromatography at low salt concentration using a crude sample of trypsin inhibitor as a model sample. One of the two hydrophobicity gradient columns was packed with a support whose hydrophobicity was critically controlled for target protein (trypsin inhibitor) and the other was packed with a support which was less hydrophobic than the critically controlled hydrophobicity support. It was found that the hydrophobicity gradient columns are useful to separate samples containing impurities of a wide range of hydrophobicities within a reasonable time.

Evaluation and applications of a new dye affinity adsorbent.

The basic properties of a new dye affinity adsorbent Toyopearl AF-Blue HC-650M and its applications to the purification of proteins were studied. The binding capacity for human serum albumin (HSA) was greater than 18 mg per ml gel. The dye leakage from Toyopearl AF-Blue HC-650M in 0.5 M NaOH and 0.5 M HCI was less compared with an agarose adsorbent. Caustic stability study also demonstrated this material withstood exposure to 0.1 M NaOH for 1 month with no significant loss of binding capacity for HSA. We purified human albumin from human serum and lactate dehydrogenase (LDH) from rabbit muscle extract in a single step. Sodium dodecylsulfate-polyacrylamide gel electrophoresis indicates that human albumin and LDH were highly purified.

Effect of chromatographic conditions on resolution in high-performance ion-exchange chromatography of proteins on nonporous support

We explored chromatographic conditions to obtain high resolution in protein separations by ion-exchange chromatography (IEC) on a nonporous anion-exchange resin of 2.5 microm in particle diameter. We studied the effects of gradient time (steepness of salt concentration gradient), flow-rate and column length on resolution in much wider ranges than had been studied before. It was found that two distinct conditions exist that provide high resolution. The first is a condition which has widely been employed in current high-performance IEC, namely, a combination of short gradient time, high flow-rate and comparatively short column. Separation times are usually 5-30 min, and even more rapid (1-2 min) separations are possible. The second is the condition which has rarely been employed in high-performance IEC. It is a combination of long gradient time, low flow-rate and long column. Although it takes several hours for one separation, very high resolution is attainable.

Submicron Optical Lithography Using Contrast Enhanced Material With Diazonium Salt As A Photobleachable Material

Material for Contrast Enhanced Lithography ( MCEL ) containing diazonium salt as a photobleachable material was developed for submicron optical lithography. New MCEL offers the following advantages. 1. Good thermal stability in solution and in film. 2. High A value ( A value : max 12 μm-1 ). 3. Good solubility to alkaline solution. 4. Excellent wettability. 5. No intermixing layer between MCEL and photoresist. In this study, we investigated the effect of MCEL on the characteristics of photoresist, such as sensitivity, gamma value, resolution, development time, exposure latitude and focus latitude, using a g-line wafer stepper with 0.35 NA lens and commercially available photoresist A as bottom layer. Key results are: 1. Incident dose was about 3 times larger than that of photoresist A. 2. Gamma value, resolution was remarkably improved and 0.7 μm line and space pattern with vertical wall was obtained and also the resolution of 0.6 μm line and space pattern was possible. 3. The focus tolerance was wider, however, the exposure tolerance was not improved. It is confirmed that newly developed MCEL had excellent properties for achieving the submicron fine patterns and wide process tolerance which assured high yields of the integrated circuits production.