Max Amende

Dehydrogenation of Dodecahydro-N-ethylcarbazole on Pd/Al2O3 Model Catalysts

To elucidate the dehydrogenation mechanism of dodecahydro-N-ethylcarbazole (H(12)-NEC) on supported Pd catalysts, we have performed a model study under ultra high vacuum (UHV) conditions. H(12)-NEC and its final dehydrogenation product, N-ethylcarbazole (NEC), were deposited by physical vapor deposition (PVD) at temperatures between 120 K and 520 K onto a supported model catalyst, which consisted of Pd nanoparticles grown on a well-ordered alumina film on NiAl(110). Adsorption and thermally induced surface reactions were followed by infrared reflection absorption spectroscopy (IRAS) and high-resolution X-ray photoelectron spectroscopy (HR-XPS) in combination with density functional theory (DFT) calculations. It was shown that, at 120 K, H(12)-NEC adsorbs molecularly both on the Al(2)O(3)/NiAl(110) support and on the Pd particles. Initial activation of the molecule occurs through C-H bond scission at the 8a- and 9a-positions of the carbazole skeleton at temperatures above 170 K. Dehydrogenation successively proceeds with increasing temperature. Around 350 K, breakage of one C-N bond occurs accompanied by further dehydrogenation of the carbon skeleton. The decomposition intermediates reside on the surface up to 500 K. At higher temperatures, further decay to small fragments and atomic species is observed. These species block most of the absorption sites on the Pd particles, but can be oxidatively removed by heating in oxygen at 600 K, fully restoring the original adsorption properties of the model catalyst.

Ligand effects in SCILL model systems: site-specific interactions with Pt and Pd nanoparticles.

N The intriguing properties of ionic liquids (ILs) [ 1 , 2 ] have led to the development of novel concepts in heterogeneous catalysis, such as “supported ionic liquid phase (SILP)” [ 3–5 ] catalyst materials or the “solid catalysts with an ionic liquid layer (SCILL)” technology. [ 6 , 7 ] SCILL systems involve the modifi cation of conventional supported catalysts by thin IL fi lms, taking advantage of the tunability of the physico-chemical properties of the ILs and their distinct potential to chemically interact with supported catalytic nanoparticles. Due to their low vapor pressure, the IL fi lms reside on the catalyst surface under reactions conditions. Enhanced selectivity has been demonstrated for SCILL systems in hydrogenation catalysis, [ 6 , 7 ] but the microscopic origins of such effects are still unclear. [ 8 ] On the one hand, the concentration of reactants available at the catalytic center may be tuned via the reactant solubility in the IL. [ 1 ] On the other hand, the IL may act as a ligand directly interacting with the catalytically active nanoparticle. Such interactions may even lead to decomposition of the IL under reaction conditions, with the co-adsorbed decomposition products further modifying the catalytic properties. In this communication, we report evidence that a typical ionic liquid like 1-butyl-3-methylimidazolium bis(trifl uoromethylsulfonyl)imide ([BMIM][Tf 2 N]) indeed develops strong ligand-like interactions with supported Pt and Pd nanoparticles. Even tightly bound adsorbates such as CO are partially replaced by the IL from the surface of nanoparticles. Interestingly, these interactions are specifi c to the particle sites and materials, i.e., different surface sites are selectively emptied on Pt or Pd nanoparticles. The co-adsorbed

Model Catalytic Studies of Liquid Organic Hydrogen Carriers: Dehydrogenation and Decomposition Mechanisms of Dodecahydro-N-ethylcarbazole on Pt(111)

Liquid organic hydrogen carriers (LOHC) are compounds that enable chemical energy storage through reversible hydrogenation. They are considered a promising technology to decouple energy production and consumption by combining high-energy densities with easy handling. A prominent LOHC is N-ethylcarbazole (NEC), which is reversibly hydrogenated to dodecahydro-N-ethylcarbazole (H12-NEC). We studied the reaction of H12-NEC on Pt(111) under ultrahigh vacuum (UHV) conditions by applying infrared reflection–absorption spectroscopy, synchrotron radiation-based high resolution X-ray photoelectron spectroscopy, and temperature-programmed molecular beam methods. We show that molecular adsorption of H12-NEC on Pt(111) occurs at temperatures between 173 and 223 K, followed by initial C–H bond activation in direct proximity to the N atom. As the first stable dehydrogenation product, we identify octahydro-N-ethylcarbazole (H8-NEC). Dehydrogenation to H8-NEC occurs slowly between 223 and 273 K and much faster above 273 K. Stepwise dehydrogenation to NEC proceeds while heating to 380 K. An undesired side reaction, C–N bond scission, was observed above 390 K. H8-NEC and H8-carbazole are the dominant products desorbing from the surface. Desorption occurs at higher temperatures than H8-NEC formation. We show that desorption and dehydrogenation activity are directly linked to the number of adsorption sites being blocked by reaction intermediates.

Dehydrogenation Mechanism of Liquid Organic Hydrogen Carriers: Dodecahydro‐N‐ethylcarbazole on Pd(111)

Dodecahydro-N-ethylcarbazole (H12-NEC) has been proposed as a potential liquid organic hydrogen carrier (LOHC) for chemical energy storage, as it combines both favourable physicochemical and thermodynamic properties. The design of optimised dehydrogenation catalysts for LOHC technology requires a detailed understanding of the reaction pathways and the microkinetics. Here, we investigate the dehydrogenation mechanism of H12-NEC on Pd(111) by using a surface-science approach under ultrahigh vacuum conditions. By combining infrared reflection-absorption spectroscopy, density functional theory calculations and X-ray photoelectron spectroscopy, surface intermediates and their stability are identified. We show that H12-NEC adsorbs molecularly up to 173 K. Above this temperature (223 K), activation of C-H bonds is observed within the five-membered ring. Rapid dehydrogenation occurs to octahydro-N-ethylcarbazole (H8-NEC), which is identified as a stable surface intermediate at 223 K. Above 273 K, further dehydrogenation of H8-NEC proceeds within the six-membered rings. Starting from clean Pd(111), C-N bond scission, an undesired side reaction, is observed above 350 K. By complementing surface spectroscopy, we present a temperature-programmed molecular beam experiment, which permits direct observation of dehydrogenation products in the gas phase during continuous dosing of the LOHC. We identify H8-NEC as the main product desorbing from Pd(111). The onset temperature for H8-NEC desorption is 330 K, the maximum reaction rate is reached around 550 K. The fact that preferential desorption of H8-NEC is observed even above the temperature threshold for H8-NEC dehydrogenation on the clean surface is attributed to the presence of surface dehydrogenation and decomposition products during continuous reactant exposure.

Dehydrogenation of Dodecahydro‐N‐ethylcarbazole on Pt(111)

Sloshing hydrogen: Liquid organic hydrogen carriers are high-boiling organic molecules, which can be reversibly hydrogenated and dehydrogenated in catalytic processes and are, therefore, a promising chemical hydrogen storage material. One of the promising candidates is the pair N-ethylcarbazole/perhydro-N-ethylcarbazole (NEC/H₁₂-NEC). The dehydrogenation and possible side reactions on a Pt(111) surface are evaluated in unprecedented detail.

Size and Structure Effects Controlling the Stability of the Liquid Organic Hydrogen Carrier Dodecahydro-N-ethylcarbazole during Dehydrogenation over Pt Model Catalysts.

Hydrogen can be stored conveniently using so-called liquid organic hydrogen carriers (LOHCs), for example, N-ethylcarbazole (NEC), which can be reversibly hydrogenated to dodecahydro-N-ethylcarbazole (H12-NEC). In this study, we focus on the dealkylation of H12-NEC, an undesired side reaction, which competes with dehydrogenation. The structural sensivity of dealkylation was studied by high-resolution X-ray photoelectron spectroscopy (HR-XPS) on Al2O3-supported Pt model catalysts and Pt(111) single crystals. We show that the morphology of the Pt deposit strongly influences LOHC degradation via C-N bond breakage. On smaller, defect-rich Pt particles, the onset of dealkylation is shifted by 90 K to lower temperatures as compared to large, well-shaped particles and well-ordered Pt(111). We attribute these effects to a reduced activation barrier for C-N bond breakage at low-coordinated Pt sites, which are abundant on small Pt aggregates but are rare on large particles and single crystal surfaces.

Structure-Dependent Anchoring of Organic Molecules to Atomically Defined Oxide Surfaces: Phthalic Acid on Co3O4(111), CoO(100), and CoO(111).

We have performed a model study to explore the influence of surface structure on the anchoring of organic molecules on oxide materials. Specifically, we have investigated the adsorption of phthalic acid (PA) on three different, well-ordered, and atomically defined cobalt oxide surfaces, namely 1) Co3O4(111), 2) CoO(111), and 3) CoO(100) on Ir(100). PA was deposited by physical vapor deposition (PVD). The formation of the PA films and interfacial reactions were monitored in situ during growth by isothermal time-resolved IR reflection absorption spectroscopy (TR-IRAS) under ultrahigh vacuum (UHV) conditions. We observed a pronounced structure dependence on the three surfaces with three distinctively different binding geometries and characteristic differences depending on the temperature and coverage. 1) PA initially binds to Co3O4(111) through the formation of a chelating bis-carboxylate with the molecular plane oriented perpendicularly to the surface. Similar species were observed both at low temperature (130 K) and at room temperature (300 K). With increasing exposure, chelating mono-carboxylates became more abundant and partially replaced the bis-carboxylate. 2) PA binds to CoO(100) in the form of a bridging bis-carboxylate for low coverage. Upon prolonged deposition of PA at low temperature, the bis-carboxylates were converted into mono-carboxylate species. In contrast, the bis-carboxylate layer was very stable at 300 K. 3) For CoO(111) we observed a temperature-dependent change in the adsorption mechanism. Although PA binds as a mono-carboxylate in a bridging bidentate fashion at low temperature (130 K), a strongly distorted bis-carboxylate was formed at 300 K, possibly as a result of temperature-dependent restructuring of the surface. The results show that the adsorption geometry of PA depends on the atomic structure of the oxide surface. The structure dependence can be rationalized by the different arrangements of cobalt ions at the three surfaces.

Alkyl chain length-dependent surface reaction of dodecahydro-N-alkylcarbazoles on Pt model catalysts

The concept of liquid organic hydrogen carriers (LOHC) holds the potential for large scale chemical storage of hydrogen at ambient conditions. Herein, we compare the dehydrogenation and decomposition of three alkylated carbazole-based LOHCs, dodecahydro-N-ethylcarbazole (H12-NEC), dodecahydro-N-propylcarbazole (H12-NPC), and dodecahydro-N-butylcarbazole (H12-NBC), on Pt(111) and on Al2O3-supported Pt nanoparticles. We follow the thermal evolution of these systems quantitatively by in situ high-resolution X-ray photoelectron spectroscopy. We show that on Pt(111) the relevant reaction steps are not affected by the different alkyl substituents: for all LOHCs, stepwise dehydrogenation to NEC, NPC, and NBC is followed by cleavage of the C-N bond of the alkyl chain starting at 380-390 K. On Pt/Al2O3, we discern dealkylation on defect sites already at 350 K, and on ordered, (111)-like facets at 390 K. The dealkylation process at the defects is most pronounced for NEC and least pronounced for NBC.

Functionalized Porphyrins on an Atomically Defined Oxide Surface: Anchoring and Coverage-Dependent Reorientation of MCTPP on Co3O4(111).

We have studied the adsorption of tetraphenylporphyrin (2HTPP) and its carboxylated counterpart mono-para-carboxyphenyltriphenylporphyrin (MCTPP) on an atomically defined Co3O4(111) film under ultrahigh vacuum (UHV) conditions. Using time-resolved infrared reflection absorption spectroscopy (TR-IRAS), we show that 2HTPP adsorbs molecularly in a flat-lying orientation, whereas MCTPP binds to the surface via formation of a chelating bidentate carboxylate upon deposition at 400 K. Combining TR-IRAS and density-functional theory (DFT), we determine the molecular tilting angle as a function of coverage. We show that the MCTPP adsorption geometry changes from a nearly flat-lying orientation (tilting angle <30°) at low coverage to a nearly perfectly upright-standing orientation (tilting angle of approximately 80°) in the full monolayer.