Mayra Tejuca

Effects of lipid composition on membrane permeabilization by sticholysin I and II, two cytolysins of the sea anemone Stichodactyla helianthus.

Sticholysin I and II (St I and St II), two basic cytolysins purified from the Caribbean sea anemone Stichodactyla helianthus, efficiently permeabilize lipid vesicles by forming pores in their membranes. A general characteristic of these toxins is their preference for membranes containing sphingomyelin (SM). As a consequence, vesicles formed by equimolar mixtures of SM with phosphatidylcholine (PC) are very good targets for St I and II. To better characterize the lipid dependence of the cytolysin-membrane interaction, we have now evaluated the effect of including different lipids in the composition of the vesicles. We observed that at low doses of either St I or St II vesicles composed of SM and phosphatidic acid (PA) were permeabilized faster and to a higher extent than vesicles of PC and SM. As in the case of PC/SM mixtures, permeabilization was optimal when the molar ratio of PA/SM was ~1. The preference for membranes containing PA was confirmed by inhibition experiments in which the hemolytic activity of St I was diminished by pre-incubation with vesicles of different composition. The inclusion of even small proportions of PA into PC/SM LUVs led to a marked increase in calcein release caused by both St I and St II, reaching maximal effect at ~5 mol % of PA. Inclusion of other negatively charged lipids (phosphatidylserine (PS), phosphatidylglycerol (PG), phosphatidylinositol (PI), or cardiolipin (CL)), all at 5 mol %, also elicited an increase in calcein release, the potency being in the order CL approximately PA >> PG approximately PI approximately PS. However, some boosting effect was also obtained, including the zwitterionic lipid phosphatidylethanolamine (PE) or even, albeit to a lesser extent, the positively charged lipid stearylamine (SA). This indicated that the effect was not mediated by electrostatic interactions between the cytolysin and the negative surface of the vesicles. In fact, increasing the ionic strength of the medium had only a small inhibitory effect on the interaction, but this was actually larger with uncharged vesicles than with negatively charged vesicles. A study of the fluidity of the different vesicles, probed by the environment-sensitive fluorescent dye diphenylhexatriene (DPH), showed that toxin activity was also not correlated to the average membrane fluidity. It is suggested that the insertion of the toxin channel could imply the formation in the bilayer of a nonlamellar structure, a toroidal lipid pore. In this case, the presence of lipids favoring a nonlamellar phase, in particular PA and CL, strong inducers of negative curvature in the bilayer, could help in the formation of the pore. This possibility is confirmed by the fact that the formation of toxin pores strongly promotes the rate of transbilayer movement of lipid molecules, which indicates local disruption of the lamellar structure.

Purification and characterization of two hemolysins from Stichodactyla helianthus

Two hemolysins, Sticholysin I (St I) and Sticholysin II (St II) were purified from the sea anemone Stichodactyla helianthus combining gel filtration and ion exchange chromatography. The amino acid composition of both cytolysins was determined revealing a high proportion of glycine, lysine, tyrosine and non-polar amino acids (alanine, leucine and valine). Cysteine was not found in either polypeptide. Molecular masses of St I and St II were 19401 and 19290 Da, respectively. N-terminal sequence analysis of St I and St II showed a high homology between them suggesting they are isoforms of the same cytolysin. Compared with other sea anemone cytolysins, St I and St II contain a 22 amino acid insertion fragment also present in Eq T II/Tn C and probably in CaT I and Hm T and absent in C III, the major hemolysin previously reported in this anemone.

Sizing the radius of the pore formed in erythrocytes and lipid vesicles by the toxin sticholysin I from the sea anemone Stichodactyla helianthus.

Abstract. The radius of the pore formed by sticholysin I and II (StI, StII) in erythrocytes and sticholysin I in lipid vesicles was investigated. The rate of colloid osmotic lysis of human erythrocytes, exposed to one of the toxins in the presence of sugars of different size, was measured. The relative permeability of each sugar was derived and the pore radius estimated with the Renkin equation. The radius was similar for sticholysin I and II and was independent of the reference sugar chosen and of the toxin concentration applied. It was also the same when erythrocytes were pretreated with different toxin doses in the presence of a polyethylene glycol (PEG) large enough to prevent lysis and thereafter transferred to solutions containing oligosaccharides of different size where they did lyse at different rates. The osmometric behavior of large unilamellar vesicles (LUV) was thereafter used to estimate the toxin lesion radius in a model system. LUV transferred to a hyperosmotic solution with a certain sugar immediately shrank and then re-swelled at a rate dependent on the bilayer permeability to water and sugar. When LUV were previously permeabilized with StI, only a fraction of them, namely those not carrying pores, continued to behave as osmometers. By increasing the size of the added sugar and approaching the pore radius, the fraction of osmometric LUV increased. Relative permeabilities were derived and used to estimate a channel radius around 1.2 nm, both for sugars and for PEGs. In conclusion the sticholysin pore has a constant size independent of toxin concentration and similar in natural and artificial membranes, suggesting it has a fixed predominant structure.

Sticholysins, two pore-forming toxins produced by the Caribbean Sea anemone Stichodactyla helianthus: Their interaction with membranes

Sticholysins (Sts) I and II (StI/II) are pore-forming toxins (PFTs) produced by the Caribbean Sea anemone Stichodactyla helianthus belonging to the actinoporin family, a unique class of eukaryotic PFTs exclusively found in sea anemones. As for the rest of the members of this family, Sts are cysteine-less proteins, with molecular weights around 20 kDa, high isoelectric points (>9.5), and a preference for sphingomyelin-containing membranes. A three-dimensional structure of StII, solved by X-ray crystallography, showed that it is composed of a hydrophobic beta-sandwich core flanked on the opposite sides by two alpha helices comprising residues 14-23 and 128-135. A variety of experimental results indicate that the first thirty N-terminal residues, which include one of the helices, are directly involved in pore formation. This region contains an amphipathic stretch, well conserved in all actinoporins, which is the only portion of the molecule that can change conformation without perturbing the general protein fold; in fact, binding to model membranes only produces a slight increase in the regular secondary structure content of Sts. Sts are produced in soluble form but they readily bind to different cell and model membrane systems such as lipidic monolayers, micelles, and lipid vesicles. Remarkably, both the binding and pore-formation steps are critically dependent on the physico-chemical nature of the membrane. In fact, a large population of toxin irreversibly binds with high affinity in membranes containing sphingomyelin whereas binding in membranes lacking this sphingolipid is relatively low and reversible. The joint presence of SM and cholesterol largely promotes binding and pore formation. Minor amounts of lipids favoring a non-lamellar organization also augment the efficiency of pore formation. The functional pore formed in cellular and model membranes has a diameter of approximately 2.0 nm and is presumably formed by the N-terminal alpha helices of four monomers tilted 31 degrees in relation to the bilayer normal. Experimental evidence supports the hypothesis that sticholysins, as well as equinatoxin II, another actinoporin, form a toroidal pore in membranes in which the polypeptide chains as well as the polar head groups of phospholipids are involved.

Binding of sea anemone pore-forming toxins sticholysins I and II to interfaces--modulation of conformation and activity, and lipid-protein interaction.

Sticholysins I and II (St I and St II) are water-soluble toxins produced by the sea anemone Stichodactyla helianthus. St I and St II bind to biological and model membranes containing sphingomyelin (SM), forming oligomeric pores that lead to leakage of internal contents. Here we describe functional and structural studies of the toxins aiming at the understanding at a molecular level of their mechanism of binding, as well as their effects on membrane permeabilization. St I and St II caused potassium leakage from red blood cells and temperature-dependent hemolysis, the activation energy of the process being lower for the latter toxin. Protein intrinsic fluorescence measurements provided evidence for toxin binding to model membranes composed of 1:1 (mol:mol) egg phosphatidyl choline (ePC):SM. The fluorescence intensity increased and the maximum emission wavelength decreased as a result of binding. The changes were quantitatively different for both toxins. Circular dichroism spectra showed that both St I and St II exhibit a high content of beta-sheet structure and that binding to model membranes did not alter the toxins conformation to a large extent. Changing the lipid composition by adding 5 mol% of negatively charged phosphatidic acid (PA) or phosphatidyl glycerol (PG) had small, but detectable, effects on protein conformation. The influence of lipid composition on toxin-induced membrane permeabilization was assessed by means of fluorescence measurements of calcein leakage. The effect was larger for ePC:SM bilayers containing 5 mol% of negative curvature-inducing lipids. Electron paramagnetic resonance (EPR) spectra of intercalated fatty acid spin probes carrying the nitroxide moiety at different carbons (5, 7, 12, and 16) evidenced the occurrence of lipid-protein interaction. Upon addition of the toxins, two-component spectra were observed for the probe labeled at C-12. The broader component, corresponding to a population of strongly immobilized spin probes, was ascribed to boundary lipid. The contribution of this component to the total spectrum was larger for St II than for St I. Moreover, it was clearly detectable for the C-12-labeled probe, but it was absent when the label was at C-16, indicating a lack of lipid-protein interaction close to the lipid terminal methyl group. This effect could be either due to the fact that the toxins do not span the whole bilayer thickness or to the formation of a toroidal pore leading to the preferential interaction with acyl chain carbons closer to the phospholipids head groups.

Functional Characterization of Sticholysin I and W111C Mutant Reveals the Sequence of the Actinoporin's Pore Assembly

The use of pore-forming toxins in the construction of immunotoxins against tumour cells is an alternative for cancer therapy. In this protein family one of the most potent toxins are the actinoporins, cytolysins from sea anemones. We work on the construction of tumour proteinase-activated immunotoxins using sticholysin I (StI), an actinoporin isolated from the sea anemone Stichodactyla helianthus. To accomplish this objective, recombinant StI (StIr) with a mutation in the membrane binding region has been employed. In this work, it was evaluated the impact of mutating tryptophan 111 to cysteine on the toxin pore forming capability. StI W111C is still able to permeabilize erythrocytes and liposomes, but at ten-fold higher concentration than StI. This is due to its lower affinity for the membrane, which corroborates the importance of residue 111 for the binding of actinoporins to the lipid bilayer. In agreement, other functional characteristics not directly associated to the binding, are essentially the same for both variants, that is, pores have oligomeric structures with similar radii, conductance, cation-selectivity, and instantaneous current-voltage behavior. In addition, this work provides experimental evidence sustaining the toroidal protein-lipid actinoporins lytic structures, since the toxins provoke the trans-bilayer movement (flip–flop) of a pyrene-labeled analogue of phosphatidylcholine in liposomes, indicating the existence of continuity between the outer and the inner membrane leaflet. Finally, our planar lipid membranes results have also contributed to a better understanding of the actinoporin’s pore assembly mechanism. After the toxin binding and the N-terminal insertion in the lipid membrane, the pore assembly occurs by passing through different transient sub-conductance states. These states, usually 3 or 4, are due to the successive incorporation of N-terminal α-helices and lipid heads to the growing pores until a stable toroidal oligomeric structure is formed, which is mainly tetrameric.

The role of ionic strength on the enhancement of the hemolytic activity of sticholysin I, a cytolysin from Stichodactyla helianthus.

Sticholysin I (St I) is a potent cytolytic polypeptide purified from the Caribbean sea anemone Stichodactyla helianthus. The hemolytic activity of sticholysin is potentiated by its preincubation at high ionic strengths. In the present work the mechanism of the potentiating action of the medium ionic strength on the toxin hemolytic capacity is investigated. It is suggested that preincubation with high saline concentration induces a transition of St I to a more relaxed conformation that facilitates the lytic process.

Validation of a mutant of the pore-forming toxin sticholysin-I for the construction of proteinase-activated immunotoxins

The use of pore-forming toxins from sea anemones (actinoporins) in the construction of immunotoxins (ITs) against tumour cells is an alternative for cancer therapy. However, the main disadvantage of actinoporin-based ITs obtained so far has been the poor cellular specificity associated with the toxins ability to bind and exert its activity in almost any cell membrane. Our final goal is the construction of tumour proteinase-activated ITs using a cysteine mutant at the membrane binding region of sticholysin-I (StI), a cytolysin isolated from the sea anemone Stichodactyla helianthus. The mutant and the ligand moiety would be linked by proteinase-sensitive peptides through the StI cysteine residue blocking the toxin binding region and hence the IT non-specific killing activity. To accomplish this objective the first step was to obtain the mutant StI W111C, and to evaluate the impact of mutating tryptophan 111 by cysteine on the toxin pore-forming capacity. After proteolysis of the cleavage sequence, a short peptide would remain attached to the toxin. The next step was to evaluate whether this mutant is able to form pores even with a residual peptide linked to cysteine 111. In this work we demonstrated that (i) StI W111C shows pore-forming capacity in a nanomolar range, although it is 8-fold less active than the wild-type recombinant StI, corroborating the previously reported importance of residue 111 for the binding of StI to membranes, and (ii) the mutant is able to form pores even with a residual seven-residue peptide linked to cysteine 111. In addition, it was demonstrated that binding of a large molecule to cysteine 111 renders an inactive toxin that is no longer able to bind to the membrane. These results validate the mutant StI W111C for its use in the construction of tumour proteinase-activated ITs.

Comparison of pore-forming ability in membranes of a native and a recombinant variant of Sticholysin II from Stichodactyla helianthus

Sticholysin II (St II) a potent cytolysin from the sea anemone Stichodactyla helianthus was obtained by recombinant procedures exhibiting six histidine residues in its N-terminus (St IIn6H). The functional comparison between St II and St IIn6H showed a lesser pore-forming ability for the recombinant than for the native in human or rat red blood cells (RBC) and in large unilamellar vesicles (LUV) of different phospholipid composition. However, binding of St IIn6H to small unilamellar vesicles (SUV) was higher with regard to St II. The explanation to the different permeabilizing capacity of both protein variants is not clear, but a different anchoring of St IIn6H to the lipid bilayer could delay the organization of the competent pore into membrane.

Cys mutants in functional regions of Sticholysin I clarify the participation of these residues in pore formation.

Experimental evidence shows that the mechanism of pore formation by actinoporins is a multistep process, involving binding of the water-soluble monomer to the membrane and subsequent oligomerization on the membrane surface, leading to the formation of a functional pore. However, as for other eukaryotic pore-forming toxins, the molecular details of the mechanism of membrane insertion and oligomerization are not clear. In order to obtain further insight with regard to the structure-function relationship in sticholysins, we designed and produced three cysteine mutants of recombinant sticholysin I (rStI) in relevant functional regions for membrane interaction: StI E2C and StI F15C (in the N-terminal region) and StI R52C (in the membrane binding site). The conformational characterization derived from fluorescence and CD spectroscopic studies of StI E2C, StI F15C and StI R52C suggests that replacement of these residues by Cys in rStI did not noticeably change the conformation of the protein. The substitution by Cys of Arg⁵² in the phosphocholine-binding site, provoked noticeable changes in rStI permeabilizing activity; however, the substitutions in the N-terminal region (Glu², Phe¹⁵) did not modify the toxins permeabilizing ability. The presence of a dimerized population stabilized by a disulfide bond in the StI E2C mutant showed higher pore-forming activity than when the protein is in the monomeric state, suggesting that sticholysins pre-ensembled at the N-terminal region could facilitate pore formation.