Michael James

Comprehensive study of carbon dioxide adsorption in the metal–organic frameworks M2(dobdc) (M = Mg, Mn, Fe, Co, Ni, Cu, Zn)

Analysis of the CO2 adsorption properties of a well-known series of metal–organic frameworks M2(dobdc) (dobdc4− = 2,5-dioxido-1,4-benzenedicarboxylate; M = Mg, Mn, Fe, Co, Ni, Cu, and Zn) is carried out in tandem with in situ structural studies to identify the host–guest interactions that lead to significant differences in isosteric heats of CO2 adsorption. Neutron and X-ray powder diffraction and single crystal X-ray diffraction experiments are used to unveil the site-specific binding properties of CO2 within many of these materials while systematically varying both the amount of CO2 and the temperature. Unlike previous studies, we show that CO2 adsorbed at the metal cations exhibits intramolecular angles with minimal deviations from 180°, a finding that indicates a strongly electrostatic and physisorptive interaction with the framework surface and sheds more light on the ongoing discussion regarding whether CO2 adsorbs in a linear or nonlinear geometry. This has important implications for proposals that have been made to utilize these materials for the activation and chemical conversion of CO2. For the weaker CO2 adsorbents, significant elongation of the metal–O(CO2) distances are observed and diffraction experiments additionally reveal that secondary CO2 adsorption sites, while likely stabilized by the population of the primary adsorption sites, significantly contribute to adsorption behavior at ambient temperature. Density functional theory calculations including van der Waals dispersion quantitatively corroborate and rationalize observations regarding intramolecular CO2 angles and trends in relative geometric properties and heats of adsorption in the M2(dobdc)–CO2 adducts.

Structural effects of the antimicrobial peptide maculatin 1.1 on supported lipid bilayers

The interactions of the antimicrobial peptide maculatin 1.1 (GLFGVLAKVAAHVVPAIAEHF-NH2) with model phospholipid membranes were studied by use of dual polarisation interferometry and neutron reflectometry and dimyristoylphosphatidylcholine (DMPC) and mixed DMPC–dimyristoylphosphatidylglycerol (DMPG)-supported lipid bilayers chosen to mimic eukaryotic and prokaryotic membranes, respectively. In DMPC bilayers concentration-dependent binding and increasing perturbation of bilayer order by maculatin were observed. By contrast, in mixed DMPC–DMPG bilayers, maculatin interacted more strongly and in a concentration-dependent manner with retention of bilayer lipid order and structure, consistent with pore formation. These results emphasise the importance of membrane charge in mediating antimicrobial peptide activity and emphasise the importance of using complementary methods of analysis in probing the mode of action of antimicrobial peptides.

The binding and fluorescence quenching efficiency of nitroaromatic (explosive) vapors in fluorescent carbazole dendrimer thin films

We present a study on three generations of fluorescent carbazole dendrimers that exhibit strong binding with nitroaromatic compounds accompanied by photoluminescence (PL) quenching, making them attractive sensing materials for the detection of explosives such as 2,4,6-trinitrotoluene (TNT). The absorption and release of vapors of the (deuterated) TNT analogue 4-nitrotoluene (pNT) from thin films of the dendrimers were studied with a combination of time-correlated neutron reflectometry and PL spectroscopy. When saturated with pNT the PL of the films was fully quenched and could not be recovered with flowing nitrogen at room temperature but only upon heating to 40-80 °C. Although the majority of the absorbed pNT could be removed with this method the recovered films were found to still contain a residual pNT concentration of ~0.1 molecules per cubic nanometer. However, the proportion of the PL recovered increased with generation with the third generation dendrimer exhibiting close to full recovery despite the presence of residual pNT. This result is attributed to a combination of two effects. First, the dendrimer films present a range of binding sites for nitroaromatic molecules with the stronger binding sites surviving the thermal recovery process. Second, there is a large decrease of the exciton diffusion coefficient with dendrimer generation, preventing migration of the excitation to the remaining bound pNT.

Evidence for a Surface Confined Ion-to-Electron Transduction Reaction in Solid-Contact Ion-Selective Electrodes Based on Poly(3-octylthiophene)

The ion-to-electron transduction reaction mechanism at the buried interface of the electrosynthesized poly(3-octylthiophene) (POT) solid-contact (SC) ion-selective electrode (ISE) polymeric membrane has been studied using synchrotron radiation-X-ray photoelectron spectroscopy (SR-XPS), near edge X-ray absorption fine structure (NEXAFS), and electrochemical impedance spectroscopy (EIS)/neutron reflectometry (NR). The tetrakis[3,5-bis(triflouromethyl)phenyl]borate (TFPB(-)) membrane dopant in the polymer ISE was transferred from the polymeric membrane to the outer surface layer of the SC on oxidation of POT but did not migrate further into the oxidized POT SC. The TFPB(-) and oxidized POT species could only be detected at the outer surface layer (≤14 Ǻ) of the SC material, even after oxidation of the electropolymerized POT SC for an hour at high anodic potential demonstrating that the ion-to-electron transduction reaction is a surface confined process. Accordingly, this study provides the first direct structural evidence of ion-to-electron transduction in the electropolymerized POT SC ISE by proving TFPB(-) transport from the polymeric ISE membrane to the oxidized POT SC at the buried interface of the SC ISE. It is inferred that the performance of the POT SC ISE is independent of the thickness of the POT SC but is instead contingent on the POT SC surface reactivity and/or electrical capacitance of the POT SC. In particular, the results suggest that the electropolymerized POT conducting polymer may spontaneously form a mixed surface/bulk oxidation state, which may explain the unusually high potential stability of the resulting ISE. It is anticipated that this new understanding of ion-to-electron transduction with electropolymerized POT SC ISEs will enable the development of new and improved devices with enhanced analytical performance attributes.

Characterizing the photoinduced switching process of a nitrospiropyran self-assembled monolayer using in situ sum frequency generation spectroscopy.

Sum frequency generation (SFG) vibrational spectroscopy is employed to investigate the reversible, photoinduced spiro→merocyanine isomerization of a self-assembled monolayer, the result of attachment of nitrospiropyran to a gold surface using a dithiolane anchoring group. The attachment of these molecular alligator clips to spiropyran molecules provide an easily accessible method to self-assemble a robust monolayer of spiropyran on a gold surface, which allows photoswitching of the spiropyran units. Probing the symmetric and antisymmetric stretching modes of the nitro group allows the determination of the structural orientation of the charged moiety with respect to the surface normal as well as the isomerization rates under photoinduced switching conditions. The photoisomerization of the spiropyran SAM on the gold surface is much faster than the rates of switching spiropyrans in a solid crystalline form, and the rate of thermal relaxation of the opened to closed form in this study is found to be on the same time scale as the relaxation of spiropyran when present in solutions with polar solvents.

Invited Article: Polarization “Down Under”: The polarized time-of-flight neutron reflectometer PLATYPUS

This review presents the implementation and full characterization of the polarization equipment of the time-of-flight neutron reflectometer PLATYPUS at the Australian Nuclear Science and Technology Organisation (ANSTO). The functionality and efficiency of individual components are evaluated and found to maintain a high neutron beam polarization with a maximum of 99.3% through polarizing Fe/Si supermirrors. Neutron spin-flippers with efficiencies of 99.7% give full control over the incident and scattered neutron spin direction over the whole wavelength spectrum available in the instrument. The first scientific experiments illustrate data correction mechanisms for finite polarizations and reveal an extraordinarily high reproducibility for measuring magnetic thin film samples. The setup is now fully commissioned and available for users through the neutron beam proposal system of the Bragg Institute at ANSTO.

Targeted detection of phosphatidylserine in biomimetic membranes and in vitro cell systems using annexin V-containing cubosomes

In this work we have formulated Annexin V (ANX) decorated phosphatidylserine containing phytantriol (PSPhy) cubosomes to act as probes for the enhanced detection of apoptotic membranes in both model and in vitro cell systems. Small angle X-ray scattering (SAXS) and cryogenic-transmission electron microscopy (Cryo-TEM) indicated that ANX-containing PSPhy (ANX-PSPhy) cubosomes retain the Pn3m cubic symmetry and cubic phase nanoparticle characteristics of PSPhy cubosomes. The interaction of ANX-PSPhy cubosomes with apoptotic model and cellular membranes was also investigated using both quartz crystal microbalance with dissipation and confocal microscopy which confirmed that ANX-PSPhy cubosomes can selectively bind to apoptotic cells and model membranes. Neutron reflectometry has also been used to show strong binding of ANX-PSPhy cubosomes to a model apoptotic membrane, and in addition reveals changes in both the bilayer structure and in the internal structure of the cubosome in a region adjacent to the membrane as a result of material exchange. This material exchange between cubosome and apoptotic model bilayer was further demonstrated using Cryo-TEM. We have demonstrated that lipid bound protein, in this case Annexin V, can be used to target cubosome systems to biological surfaces in vitro.

Time-resolved neutron reflectometry and photovoltaic device studies on sequentially deposited PCDTBT-fullerene layers

We have used steady-state and time-resolved neutron reflectometry to study the diffusion of fullerene derivatives into the narrow optical gap polymer poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2,1,3-benzothiadiazole)] (PCDTBT) to explore the sequential processing of the donor and acceptor for the preparation of efficient organic solar cells. It was found that when [6,6]-phenyl-C61-butyric-acid-methyl-ester (60-PCBM) was deposited onto a thin film of PCDTBT from dichloromethane (DCM), a three-layer structure was formed that was stable below the glass-transition temperature of the polymer. When good solvents for the polymer were used in conjunction with DCM, both 60-PCBM and [6,6]-phenyl-C71-butyric-acid-methyl-ester (70-PCBM) were seen to form films that had a thick fullerene layer containing little polymer and a PCDTBT-rich layer near the interface with the substrate. Devices composed of films prepared by sequential deposition of the polymer and fullerene had efficiencies of up to 5.3%, with those based on 60-PCBM close to optimized bulk heterojunction (BHJ) cells processed in the conventional manner. Sequential deposition of pure components to form the active layer is attractive for large-area device fabrication, and the results demonstrate that this processing method can give efficient solar cells.

Determination of Fullerene Scattering Length Density: A Critical Parameter for Understanding the Fullerene Distribution in Bulk Heterojunction Organic Photovoltaic Devices

Fullerene derivatives are commonly used as electron acceptors in combination with (macro)molecular electron donors in bulk heterojunction (BHJ) organic photovoltaic (OPV) devices. Understanding the BHJ structure at different electron donor/acceptor ratios is critical to the continued improvement and development of OPVs. The high neutron scattering length densities (SLDs) of the fullerenes provide effective contrast for probing the distribution of the fullerene within the blend in a nondestructive way. However, recent neutron scattering studies on BHJ films have reported a wide range of SLDs ((3.6-4.4) × 10(-6) Å(-2)) for the fullerenes 60-PCBM and 70-PCBM, leading to differing interpretations of their distribution in thin films. In this article, we describe an approach for determining more precisely the scattering length densities of the fullerenes within a polymer matrix in order to accurately quantify their distribution within the active layers of OPV devices by neutron scattering techniques.

Synthesis of deuterated [D32]oleic acid and its phospholipid derivative [D64]dioleoyl‐sn‐glycero‐3‐phosphocholine

Oleic acid and its phospholipid derivatives are fundamental to the structure and function of cellular membranes. As a result, there has been increasing interest in the availability of their deuterated forms for many nuclear magnetic resonance, infrared, mass spectroscopy and neutron scattering studies. Here, we present for the first time a straightforward, large-scale (gram quantities) synthesis of highly deuterated [D32 ]oleic acid by using multiple, yet simple and high yielding reactions. The precursors for the synthesis of [D32 ]oleic acid are [D14 ]azelaic acid and [D17 ]nonanoic acid, which were obtained by complete deuteration (>98% D) of their (1) H forms by using metal catalysed hydrothermal H/D exchange reactions. The oleic acid was produced with ca. 94% D isotopic purity and with no contamination by the trans-isomer (elaidic acid). The subsequent synthesis of [D64 ]dioleoyl-sn-glycero-3-phosphocholine from [D32 ]oleic acid is also described.