Mikhail Bogdanov

Lipid-Dependent Membrane Protein Topogenesis

The topology of polytopic membrane proteins is determined by topogenic sequences in the protein, protein-translocon interactions, and interactions during folding within the protein and between the protein and the lipid environment. Orientation of transmembrane domains is dependent on membrane phospholipid composition during initial assembly as well as on changes in lipid composition postassembly. The membrane translocation potential of negative amino acids working in opposition to the positive-inside rule is largely dampened by the normal presence of phosphatidylethanolamine, thus explaining the dominance of positive residues as retention signals. Phosphatidylethanolamine provides the appropriate charge density that permits the membrane surface to maintain a charge balance between membrane translocation and retention signals and also allows the presence of negative residues in the cytoplasmic face of proteins for other purposes.

A polytopic membrane protein displays a reversible topology dependent on membrane lipid composition

To address the role of phospholipids in the topological organization of polytopic membrane proteins, the function and assembly of lactose permease (LacY) was studied in mutants of Escherichia coli lacking phosphatidylethanolamine (PE). PE is required for the proper conformation and active transport function of LacY. The N‐terminal half of LacY assembled in PE‐lacking cells adopts an inverted topology in which normally non‐translocated domains are translocated and vice versa. Post‐assembly synthesis of PE triggers a conformational change, resulting in a lipid‐dependent recovery of normal conformation and topology of at least one LacY subdomain accompanied by restoration of active transport. These results demonstrate that membrane protein topology once attained can be changed in a reversible manner in response to alterations in phospholipid composition, and may be subject to post‐assembly proofreading to correct misfolded structures.

Lipid-assisted Protein Folding

Although there has been significant progress in our understand-ing of how water-soluble proteins fold (1, 2), the factors and mech-anism driving correct folding of integral membrane proteins arelargely unknown. The folding of membrane proteins, like theirsoluble counterparts, is dictated by their amino acid sequence andtheir environment (Fig. 1). Integral membrane proteins can alsointeract with other proteins within the membrane and with thehydrophobic and hydrophilic components of the lipid bilayer itselfduring and after attainment of native structure. The role of lipidsas an important structure-forming environment was elucidatedduring the last decade (3). However, the role individual lipids playas part of the protein folding machinery has been largely ignored.Are individual lipids mobilized to protect and guide the nascentpolypeptide chain during its membrane assembly? Do lipids act asspecific molecular chaperones or transient ligands during the as-sembly of a membrane protein?

A Phospholipid Acts as a Chaperone in Assembly of a Membrane Transport Protein

A mutant of Escherichia coli lacking phosphatidylethanolamine (PE) and a monoclonal antibody (mAb 4B1) directed against a conformationally sensitive epitope (4B1) of lactose permease were used to establish a novel role for a phospholipid in the assembly of a membrane protein. Epitope 4B1 is readily detectable in spheroplasts and right-side-out membrane vesicles from PE-containing but not from PE-deficient cells expressing lactose permease. Lactose permease from PE-containing membranes, but not from PE-deficient membranes, subjected to sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis and Western blot analysis is also recognized by mAb 4B1. If total E. coli phospholipids or PE (but not phosphatidylcholine, phosphatidylglycerol, or cardiolipin) are blotted on nitrocellulose sheets (Eastern blot) prior to transfer of proteins from SDS-polyacrylamide gels, the permease from PE-deficient cells regains its recognition by mAb 4B1. Therefore, PE is required during assembly to form epitope 4B1, but, once formed, sufficient “conformational memory” is retained in the permease to either retain or reform this epitope in the absence of PE. Lactose permease lacking epitope 4B1 can be induced to form the epitope if partially denatured and then renatured in the presence of PE specifically. These results establish for the first time a role for PE as a molecular chaperone in the assembly of the lactose permease.

Phospholipid-assisted protein folding: phosphatidylethanolamine is required at a late step of the conformational maturation of the polytopic membrane protein lactose permease

Previously we presented evidence that phosphatidylethanolamine (PE) acts as a molecular chaperone in the folding of the polytopic membrane protein lactose permease (LacY) of Escherichia coli. Here we provide more definitive evidence supporting the chaperone properties of PE. Membrane insertion of LacY prevents its irreversible aggregation, and PE participates in a late step of conformational maturation. The temporal requirement for PE was demonstrated in vitro using a coupled translation–membrane insertion assay that allowed the separation of membrane insertion from phospholipid‐assisted folding. LacY was folded properly, as assessed by recognition with conformation‐specific monoclonal antibodies, when synthesized in the presence of PE‐containing inside‐out membrane vesicles (IOVs) or in the presence of IOVs initially lacking PE but supplemented with PE synthesized in vitro either co‐ or post‐translationally. The presence of IOVs lacking PE and containing anionic phospholipids or no addition of IOVs resulted in misfolded or aggregated LacY, respectively. Therefore, critical folding steps occur after membrane insertion dependent on the interaction of LacY with PE to prevent illicit interactions which lead to misfolding of LacY.

Phospholipid-assisted refolding of an integral membrane protein. Minimum structural features for phosphatidylethanolamine to act as a molecular chaperone.

Escherichia coli-derived phosphatidylethanolamine (PE) or PE with fully saturated fatty acids was able to correct in vitro a defect in folding in the lipid-dependent epitope 4B1 of lactose permease (LacY) resulting from in vivo assembly in the absence of PE. PE plasmalogen, PE with two unsaturated fatty acids, and lyso-PE, which all do not favor bilayer organization, did not support proper refolding. Proper refolding occurred when these latter lipids were mixed with a bilayer-forming lipid (phosphatidylglycerol), which alone could not support refolding. l-Phosphatidylserine (PS; natural diastereomer) did support proper refolding. PE derivatives of increasing degrees of methylation were progressively less effective in supporting refolding, with phosphatidylcholine being completely ineffective. Therefore, the properties of nonmethylated aminophospholipids capable of organization into a bilayer configuration are essential for the recovery of the native state of epitope 4B1 after misassembly in vivo in the absence of PE. Neitherd-PS (sn-glycero-1-phosphate backbone) nor P-d-S (d-serine in the head group) is competent in supporting proper refolding unless used in binary mixtures with phosphatidylglycerol. The detailed characterization of phospholipid-assisted refolding reported here further supports a specific rather than nonspecific role for PE in structural maturation of lactose permease in vivo (Bogdanov, M., and Dowhan, W. (1998) EMBO J. 17, 5255–5264).

To flip or not to flip: lipid–protein charge interactions are a determinant of final membrane protein topology

The molecular details of how lipids influence final topological organization of membrane proteins are not well understood. Here, we present evidence that final topology is influenced by lipid–protein interactions most likely outside of the translocon. The N-terminal half of Escherichia coli lactose permease (LacY) is inverted with respect to the C-terminal half and the membrane bilayer when assembled in mutants lacking phosphatidylethanolamine and containing only negatively charged phospholipids. We demonstrate that inversion is dependent on interactions between the net charge of the cytoplasmic surface of the N-terminal bundle and the negative charge density of the membrane bilayer surface. A transmembrane domain, acting as a molecular hinge between the two halves of the protein, must also exit from the membrane for inversion to occur. Phosphatidylethanolamine dampens the translocation potential of negative residues in favor of the cytoplasmic retention potential of positive residues, thus explaining the dominance of positive over negative amino acids as co- or post-translational topological determinants.

Topology of polytopic membrane protein subdomains is dictated by membrane phospholipid composition

In Escherichia coli, the major cytoplasmic domain (C6) of the polytopic membrane protein lactose permease (LacY) is exposed to the opposite side of the membrane from a neighboring periplasmic domain (P7). However, these domains are both exposed on the periplasmic side of the membrane in a mutant of E.coli lacking phosphatidylethanolamine (PE) wherein LacY only mediates facilitated transport. When purified LacY was reconstituted into liposomes lacking PE or phosphatidylcholine (PC), C6 and P7 were on the same side of the bilayer. In liposomes containing PE or PC, C6 and P7 were on opposite sides of the bilayer. Only the presence of PE in the liposomes restored active transport function of LacY as opposed to restoration of only facilitated transport function in the absence of PE. These results were the same for LacY purified from PE‐containing or PE‐lacking cells, and are consistent with the topology and function of LacY assembled in vivo. Therefore, irrespective of the mechanism of membrane insertion, the subdomain topological orientation and function of LacY are determined primarily by membrane phospholipid composition.

Reversible topological organization within a polytopic membrane protein is governed by a change in membrane phospholipid composition

Once inserted, transmembrane segments of polytopic membrane proteins are generally considered stably oriented due to the large free energy barrier to topological reorientation of adjacent extramembrane domains. However, the topology and function of the polytopic membrane protein lactose permease of Escherichia coli are dependent on the membrane phospholipid composition, revealing topological dynamics of transmembrane domains after stable membrane insertion (Bogdanov, M., Heacock, P. N., and Dowhan, W. (2002) EMBO J. 21, 2107–2116). In this study, we show that the high affinity phenylalanine permease PheP shares many similarities with lactose permease. PheP assembled in a mutant of E. coli lacking phosphatidylethanolamine (PE) exhibited significantly reduced active transport function and a complete inversion in topological orientation of the N terminus and adjoining transmembrane hairpin loop compared with PheP in a PE-containing strain. Introduction of PE following the assembly of PheP triggered a reorientation of the N terminus and adjacent hairpin to their native orientation associated with regain of wild-type transport function. The reversible orientation of these secondary transport proteins in response to a change in phospholipid composition might be a result of inherent conformational flexibility necessary for transport function or during protein assembly.

Discovery of a cardiolipin synthase utilizing phosphatidylethanolamine and phosphatidylglycerol as substrates

Depending on growth phase and culture conditions, cardiolipin (CL) makes up 5–15% of the phospholipids in Escherichia coli with the remainder being primarily phosphatidylethanolamine (PE) and phosphatidylglycerol (PG). In E. coli, the cls and ybhO genes (renamed clsA and clsB, respectively) each encode a CL synthase (Cls) that catalyzes the condensation of two PG molecules to form CL and glycerol. However, a ∆clsAB mutant still makes CL in the stationary phase, indicating the existence of additional Cls. We identified a third Cls encoded by ymdC (renamed clsC). ClsC has sequence homology with ClsA and ClsB, which all belong to the phospholipase D superfamily. The ∆clsABC mutant lacks detectible CL regardless of growth phase or growth conditions. CL can be restored to near wild-type levels in stationary phase in the triple mutant by expressing either clsA or clsB. Expression of clsC alone resulted in a low level of CL in the stationary phase, which increased to near wild-type levels by coexpression of its neighboring gene, ymdB. CL synthesis by all Cls is increased with increasing medium osmolarity during logarithmic growth and in stationary phase. However, only ClsA contributes detectible levels of CL at low osmolarity during logarithmic growth. Mutation of the putative catalytic motif of ClsC prevents CL formation. Unlike eukaryotic Cls (that use PG and CDP-diacylglycerol as substrates) or ClsA, the combined YmdB-ClsC used PE as the phosphatidyl donor to PG to form CL, which demonstrates a third and unique mode for CL synthesis.