Min Heon

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti(3)AlC(2)

Currently, however, there are relatively few such atomically layered solids. [ 2–5 ] Here, we report on 2D nanosheets, composed of a few Ti 3 C 2 layers and conical scrolls, produced by the room temperature exfoliation of Ti 3 AlC 2 in hydrofl uoric acid. The large elastic moduli predicted by ab initio simulation, and the possibility of varying their surface chemistries (herein they are terminated by hydroxyl and/or fl uorine groups) render these nanosheets attractive as polymer composite fi llers. Theory also predicts that their bandgap can be tuned by varying their surface terminations. The good conductivity and ductility of the treated powders suggest uses in Li-ion batteries, pseudocapacitors, and other electronic applications. Since Ti 3 AlC 2 is a member of a 60 + group of layered ternary carbides and nitrides known as the MAX phases, this discovery opens a door to the synthesis of a large number of other 2D crystals. Arguably the most studied freestanding 2D material is graphene, which was produced by mechanical exfoliation into single-layers in 2004. [ 1 ] Some other layered materials, such as hexagonal BN, [ 2 ] transition metal oxides, and hydroxides, [ 4 ] as well as clays, [ 3 ] have also been exfoliated into 2D sheets. Interestingly, exfoliated MoS 2 single layers were reported as early as in 1986. [ 5 ] Graphene is fi nding its way to applications ranging from supercapacitor electrodes [ 6 ] to reinforcement in composites. [ 7 ] Although graphene has attracted more attention than all other 2D materials combined, its simple chemistry and the weak van der Waals bonding between layers in multilayer structures limit its use. Complex, layered structures that contain more than one element may offer new properties because they

Carbon coated textiles for flexible energy storage

This paper describes a flexible and lightweight fabric supercapacitor electrode as a possible energy source in smart garments. We examined the electrochemical behavior of porous carbon materials impregnated into woven cotton and polyester fabrics using a traditional printmaking technique (screen printing). The porous structure of such fabrics makes them attractive for supercapacitor applications that need porous films for ion transfer between electrodes. We used cyclic voltammetry, galvanostatic cycling and electrochemical impedance spectroscopy to study the capacitive behaviour of carbon materials using nontoxic aqueous electrolytes including sodium sulfate and lithium sulfate. Electrodes coated with activated carbon (YP17) and tested at ∼0.25 A·g−1 achieved a high gravimetric and areal capacitance, an average of 85 F·g−1 on cotton lawn and polyester microfiber, both corresponding to ∼0.43 F·cm−2.

Continuous carbide-derived carbon films with high volumetric capacitance

Monolithic porous carbon film has a great potential for integrated supercapacitors due to no polymer binder, reduced macropore volume, and good adhesion between current collector and active material. It is demonstrated that continuous carbide-derived carbon (CDC) films can be synthesized on various substrates by dry etching. CDC films show high volumetric capacitance of ∼180 F cm−3 in 1.5 M TEABF4/acetonitrile electrolyte.

Development of a Green Supercapacitor Composed Entirely of Environmentally Friendly Materials

Owing to recent power- and energy-density advances, higher efficiencies, and almost unlimited lifetimes, electrical double-layer capacitors (EDLCs, also known as supercapacitors) are now used in a wide range of energy harvesting and storage systems, which include portable power and grid applications. Despite offering key performance advantages, many device components pose significant environmental hazards once disposed. They often contain fluorine, sulfur, and cyanide groups, which are harmful if discarded by using conventional landfill or incineration methods, and they are constructed by using multiple metallic parts, which contribute to a high ash content. We explore designs for a fully operational supercapacitor that incorporates materials completely safe to dispose of and easy to incinerate. The components, which include material alternatives for the current collector, electrolyte, separator, particle binder, and packaging, are all mutually compatible, and most of them exhibit better performance than commonly used materials. We selected a graphite foil as current collector, sodium acetate as electrolyte, an ester as porous membrane based on acetate cellulose, and polymers based on polyvinyl alcohol as environmentally benign solutions for device components. The presented materials all originate from simple and inexpensive source compounds, which decreases the environmental impact of their manufacture and renders them more viable for integration into commercial devices for large-scale stationary and transportation energy storage applications.

In situ tracking of the nanoscale expansion of porous carbon electrodes

Electrochemical double layer capacitors (EDLC) are rapidly emerging as a promising energy storage technology offering extremely large power densities. Despite significant experimental progress, nanoscale operation mechanisms of the EDLCs remain poorly understood and it is difficult to separate processes at multiple time and length scales involved in operation including that of double layer charging and ionic mass transport. Here we explore the functionality of EDLC microporous carbon electrodes using a combination of classical electrochemical measurements and scanning probe microscopy based dilatometry, thus separating individual stages in charge/discharge processes based on strain generation. These methods allowed us to observe two distinct modes of EDLC charging, one fast charging of the double layer unassociated with strain, and another much slower mass transport related charging exhibiting significant sample volume changes. These studies open the pathway for the exploration of electrochemical systems with multiple processes involved in the charge and discharge, and investigation of the kinetics of those processes.

Low Temperature Plasma Reforming of Hydrocarbon Fuels Into Hydrogen and Carbon Suboxide for Energy Generation Without

An alternative process of extracting energy from fossil fuels (coal, biomass, hydrocarbons, etc.) without the emission of CO2 is possible with nonequilibrium plasma. Apart from CO and CO2, there exists carbon suboxide (C3O2)-a solid carbon oxide, which can be polymerized to form chemically and thermodynamically stable substances. This article describes a novel process of extracting the energy from fossil fuels without the emission of CO2 while producing hydrogen and carbon suboxide (a reddish, brown polymer), an important constituent of organic fertilizers. This approach has the capability of avoiding drawbacks associated with combustion of fossil fuels, such as CO2 emission. The conversion processes of a hydrocarbon feedstock (n-butane) and characterization of the byproduct of the conversion process with energy dispersive X-ray spectroscopy are discussed. Thermodynamic calculation of energy efficiencies of conversion of readily available hydrocarbon feedstocks such as biomass, natural gas, and low quality coal (lignite and peat) into hydrogen and carbon suboxide is also discussed. Thermodynamic results calculated show energy efficiency of up to 78% for producing carbon suboxide from various hydrocarbon feedstocks when compared to energy efficiency of producing syngas (100%).

\hbox{CO}_{2}

This paper reports the synthesis and characterization of silver oxide films for use as bactericidal coatings. Synthesis parameters, dissolution/elution rate, and bactericidal efficacy are reported. Synthesis conditions were developed to create AgO, Ag2O, or mixtures of AgO and Ag2O on surfaces by reactive magnetron sputtering. The coatings demonstrate strong adhesion to many substrate materials and impede the growth of all bacterial strains tested. The coatings are effective in killing Escherichia coli and Staphylococcus aureus, demonstrating a clear zone-of-inhibition against bacteria growing on solid media and the ability to rapidly inhibit bacterial growth in planktonic culture. Additionally, the coatings exhibit very high elution of silver ions under conditions that mimic dynamic fluid flow ranging between 0.003 and 0.07 ppm/min depending on the media conditions. The elution of silver ions from the AgO/Ag2O surfaces was directly impacted by the complexity of the elution media, with a reduction in elution rate when examined in complex cell culture media. Both E. coli and S. aureus were shown to bind ~1 ppm Ag+/mL culture. The elution of Ag+ resulted in no increases in mammalian cell apoptosis after 24 h exposure compared to control, but apoptotic cells increased to ~35% by 48 and 72 h of exposure. Taken together, the AgO/Ag2O coatings described are effective in eliciting antibacterial activity and have potential for application on a wide variety of surfaces and devices.