Nikhil Gunari

Phospholipid Membrane Encapsulation of Nanoparticles for Surface-Enhanced Raman Scattering

Lipid-encapsulated surface-enhanced Raman scattering (SERS) nanoparticles, with promising applications in biomedical diagnostics, were produced. Gold nanoparticles, 60 nm in diameter, were coated with a ternary mixture of DOPC, sphingomyelin, and cholesterol. The lipid layer is versatile for engineering the chemical and optical properties of the particles. The stability of the lipid-encapsulated particles is demonstrated over a period of weeks. The versatility of the layer is demonstrated by the incorporation of three different Raman-active species using three different strategies. The lipid layer was directly observed by TEM, and the SERS spectrum of the three dye species was confirmed by Raman spectroscopy. UV-vis absorption and dynamic light scattering provide additional evidence of lipid encapsulation. The encapsulation is achieved in aqueous solution, avoiding phase transfer and possible contamination from organic solvents. Furthermore, when fluorescent dye-labeled lipids were employed in the encapsulant, the fluorescence and SERS activity of the particles were controlled by the use of dissolved ions in the preparation solution.

Water-Stable Diblock Polystyrene-block-poly(2-vinyl pyridine) and Diblock Polystyrene-block-poly(methyl methacrylate) Cylindrical Patterned Surfaces Inhibit Settlement of Zoospores of the Green Alga Ulva

Nanopatterned surfaces with hydrophobic and hydrophilic domains were produced using the diblock copolymer polystyrene-block-poly(2-vinyl pyridine) (PS-b-P2VP) and polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA). The PS-b-P2VP diblock copolymer, mixed with the cross-linker benzophenone and spin-coated onto silicon wafers, showed self-assembled cylindrical structures, which were retained after UV treatment for cross-linking. The thin films displayed cylindrical domains after immersion in water. This study shows that pattern retention in water is possible for a long period of time, at least for two weeks in pure water and three weeks in artificial seawater. The PS-b-PMMA diblock showed self-assembled cylindrical structures. PS-b-P2VP and PS-b-PMMA cylindrical patterned surfaces showed reduced settlement of zoospores of the green alga Ulva compared to unpatterned surfaces. The copolymers were investigated using atomic force microscopy and X-ray photoelectron spectroscopy.

Imaging Secondary Structure of Individual Amyloid Fibrils of a β2-Microglobulin Fragment Using Near-Field Infrared Spectroscopy

Amyloid fibril diseases are characterized by the abnormal production of aggregated proteins and are associated with many types of neuro- and physically degenerative diseases. X-ray diffraction techniques, solid-state magic-angle spinning NMR spectroscopy, circular dichroism (CD) spectroscopy, and transmission electron microscopy studies have been utilized to detect and examine the chemical, electronic, material, and structural properties of amyloid fibrils at up to angstrom spatial resolution. However, X-ray diffraction studies require crystals of the fibril to be analyzed, while other techniques can only probe the bulk solution or solid samples. In the work reported here, apertureless near-field scanning infrared microscopy (ANSIM) was used to probe the secondary structure of individual amyloid fibrils made from an in vitro solution. Simultaneous topographic and infrared images of individual amyloid fibrils synthesized from the #21-31 peptide fragment of β(2)-microglobulin were acquired. Using this technique, IR spectra of the amyloid fibrils were obtained with a spatial resolution of less than 30 nm. It is observed that the experimental scattered field spectrum correlates strongly with that calculated using the far-field absorption spectrum. The near-field images of the amyloid fibrils exhibit much lower scattering of the IR radiation at approximately 1630 cm(-1). In addition, the near-field images also indicate that composition and/or structural variations among individual amyloid fibrils were present.

Hierarchical structure formation of cylindrical brush polymer-surfactant complexes.

The complex formation of cylindrical brush polymers with poly(l-lysine) side chains (PLL) and sodium dodecyl sulfate (SDS) can induce a helical conformation of the cylindrical brush polymer in aqueous solution (Gunari, N.; Cong, Y.; Zhang, B.; Fischer, K.; Janshoff, A.; Schmidt, M. Macromol. Rapid Commun. 2008, 29, 821-825). Herein, we have systematically investigated the influence of surfactant, salt, and pH on the supramolecular structure formation. The cylindrical brush polymers and their complexes with surfactants were directly visualized by atomic force microscopy in air and in aqueous solution. The alkyl chain length (measured by the carbon number, n) of the surfactant plays a key role. While helical structures were formed with n=10, 11, and 12, no helices were observed with n<10 and n>13. Addition of salt destroys the helical structures as do pH conditions below 4 and above 6, most probably because the polymer-surfactant complexes start to disintegrate. Circular dichroism was utilized to monitor the PLL side chain conformation and clearly revealed that beta-sheet formation of the side chains induces the helical conformation of the atactic main chain.

Nanomechanical Fingerprints of Individual Blocks of a Diblock Copolymer Chain

Atomic force microscopy (AFM)-based single polymer chain pulling experiments have been used to study the structural transitions of individual homopolymer chains in water. Polystyrene (PS) showed a three-regime force-extension profile exhibiting a force plateau reminiscent of a first-order transition, as predicted theoretically, whereas poly(methyl methacrylate) (PMMA) showed a characteristic saw-tooth pattern reminiscent of multidomain disassembly behavior. The two distinct structural transtions provide fingerprints for the individual homopolymers, which can be used to identify individual blocks of symmetric and asymmetric PS- b-PMMA diblock copolymer chains.