Olaf Wilke

Application of a novel reference material in an international round robin test on material emissions testing

Emission testing of products is currently a rapidly increasing field of measurement activity. Labeling procedures for construction products are based on such emission test chamber measurements, and hence, measurement performance should be verified. One possible route is to conduct testing of one material in different laboratories within a round robin test (RRT), ideally using homogeneous reference materials, which can be used within interlaboratory studies or as part of the quality management system to ensure comparable results. The applicability of a lacquer system with nine added VOCs (hexanal, styrene, n-decane, limonene, 2-ethyl-1-hexanol, N-methyl-α-pyrrolidone, 2-ethylhexyl acrylate, dimethyl phthalate, and n-hexadecane) was evaluated in an international RRT with 55 participating laboratories. An intralaboratory quality check confirmed the homogeneity and reproducibility of the lacquer material for most of the compounds (RSD 5%-6%), which was confirmed in the RRT. However, emissions varied for the polar compound N-methyl-α-pyrrolidone and the higher boiling compounds 1,2-dimethyl phthalate, and n-hexadecane which could be traced back to analytical issues. In the RRT, the interlaboratory relative standard deviations (RSDs) ranged from 30% to 65% for all participants but for reference laboratories the range was between 20% and 45%.

Determination of the emissions of volatile organic compounds from oriented strand boards and evaluation by the German AgBB scheme

There has been an increasing use of oriented strand boards (OSBs) for the construction of floors, ceilings and walls of buildings. In Germany and other European countries, OSBs are mainly produced from pine wood (Pinus sylvestris). In response to complaints about the odour and irritation of mucous membranes in connection with the use of OSBs, samples of OSBs were bought from do-it-yourself stores to test their volatile organic compound (VOC) emissions by using emission test chambers. The boards emitted predominantly monoterpenes, aldehydes, acids and acetone. Aldehydes are generated during the production process by the oxidation of unsaturated fatty acids such as linoleic acid. Pine wood, compared with other wood species, contains more unsaturated fatty acids. Of the six acquired OSBs, four boards from three manufacturers would not meet the requirements of the German AgBB (Ausschuss zur gesundheitlichen Bewertung von Bauprodukten, Committee for Health Evaluation of Building Products), mainly because of the emissions of unsaturated aldehydes. These compounds have low LCI values (lowest concentration of interest) and are therefore problematic substances based on a health-related evaluation of building products according to the AgBB scheme.

Emissionsbegrenzung aus Laserdruckern und Kopierern

Kurzfassung Vor dem Hintergrund der notwendigen Revision der Kriterien zur Vergabe des Gütezeichens „Blauer Engel“ für Laserdrucker, Kopierer und Multifunktionsgeräte mussten auch die Prüfmethoden angepasst werden, da die alten Verfahren nicht mehr die heutigen Anforderungen an Emissionsmessungen erfüllen. In diesem Zusammenhang wurde auch das unterschiedliche Emissionsverhalten von Hardcopy-Geräten auf Grund der verschiedenen und nicht miteinander vergleichbaren Prüfverfahren heftig diskutiert. Aus diesen Gründen wurde ein neues Prüfverfahren entwickelt, mit dem eine verlässliche und reproduzierbare Prüfung der Emissionsraten von Staub, Ozon und flüchtigen organischen Verbindungen auf der Basis des ECMA (European Computer Manufacturer Association) Standards 328 möglich ist. Dazu wurden neun verschiedene Geräte unter verschiedenen Bedingungen untersucht. Als ein Ergebnis dieser Studie wurden neue Kriterien zur Vergabe des „Blauen Engels“ für Kopierer, Drucker und Multifunktionsgeräte festgelegt.