Wolfgang Horn

Investigations on the emissions of biocides and PCBs under low volume conditions

The aim of this study was the development of a low volume air sampling strategy for biocides and polychlorinated biphenyls (PCB) at low air change rates in modern, air-tight showcases as they are present in museums. Lindane, pentachlorophenol, dichlofluanid, tolyfluanid, isodrin, p,p-dichlorodiphenyl trichloroethane and permethrin were the biocides and PCB28 and PCB153 were the PCBs studied, all of which are semi volatile organic compounds (SVOC). Their occurrences in the museum environment originate from various sources e.g. preventive treatment of organic exhibits or organic building materials. Exhibits are long-term exposed to these pollutants due to storing in showcases or other storage equipment at low air change rates. To achieve air sampling under the aforementioned conditions the influences of temperature, air circulation, air change rate and relative humidity on the emission behavior of the selected biocides and PCBs had to be determined. This was carried out with pre-soaked wood samples in low volume air sampling experiments using 27L test showcases and 23L and 24L emission test chambers and also diffusive sampling with glass as the sampling material.

Application of a novel reference material in an international round robin test on material emissions testing

Emission testing of products is currently a rapidly increasing field of measurement activity. Labeling procedures for construction products are based on such emission test chamber measurements, and hence, measurement performance should be verified. One possible route is to conduct testing of one material in different laboratories within a round robin test (RRT), ideally using homogeneous reference materials, which can be used within interlaboratory studies or as part of the quality management system to ensure comparable results. The applicability of a lacquer system with nine added VOCs (hexanal, styrene, n-decane, limonene, 2-ethyl-1-hexanol, N-methyl-α-pyrrolidone, 2-ethylhexyl acrylate, dimethyl phthalate, and n-hexadecane) was evaluated in an international RRT with 55 participating laboratories. An intralaboratory quality check confirmed the homogeneity and reproducibility of the lacquer material for most of the compounds (RSD 5%-6%), which was confirmed in the RRT. However, emissions varied for the polar compound N-methyl-α-pyrrolidone and the higher boiling compounds 1,2-dimethyl phthalate, and n-hexadecane which could be traced back to analytical issues. In the RRT, the interlaboratory relative standard deviations (RSDs) ranged from 30% to 65% for all participants but for reference laboratories the range was between 20% and 45%.

Emissionsbegrenzung aus Laserdruckern und Kopierern

Kurzfassung Vor dem Hintergrund der notwendigen Revision der Kriterien zur Vergabe des Gütezeichens „Blauer Engel“ für Laserdrucker, Kopierer und Multifunktionsgeräte mussten auch die Prüfmethoden angepasst werden, da die alten Verfahren nicht mehr die heutigen Anforderungen an Emissionsmessungen erfüllen. In diesem Zusammenhang wurde auch das unterschiedliche Emissionsverhalten von Hardcopy-Geräten auf Grund der verschiedenen und nicht miteinander vergleichbaren Prüfverfahren heftig diskutiert. Aus diesen Gründen wurde ein neues Prüfverfahren entwickelt, mit dem eine verlässliche und reproduzierbare Prüfung der Emissionsraten von Staub, Ozon und flüchtigen organischen Verbindungen auf der Basis des ECMA (European Computer Manufacturer Association) Standards 328 möglich ist. Dazu wurden neun verschiedene Geräte unter verschiedenen Bedingungen untersucht. Als ein Ergebnis dieser Studie wurden neue Kriterien zur Vergabe des „Blauen Engels“ für Kopierer, Drucker und Multifunktionsgeräte festgelegt.