Oliver Jann

XRF-analysis of fine and ultrafine particles emitted from laser printing devices.

In this work, the elemental composition of fine and ultrafine particles emitted by ten different laser printing devices (LPD) is examined. The particle number concentration time series was measured as well as the particle size distributions. In parallel, emitted particles were size-selectively sampled with a cascade impactor and subsequently analyzed by the means of XRF. In order to identify potential sources for the aerosols elemental composition, materials involved in the printing process such as toner, paper, and structural components of the printer were also analyzed. While the majority of particle emissions from laser printers are known to consist of recondensated semi volatile organic compounds, elemental analysis identifies Si, S, Cl, Ca, Ti, Cr, and Fe as well as traces of Ni and Zn in different size fractions of the aerosols. These elements can mainly be assigned to contributions from toner and paper. The detection of elements that are likely to be present in inorganic compounds is in good agreement with the measurement of nonvolatile particles. Quantitative measurements of solid particles at 400 °C resulted in residues of 1.6 × 10(9) and 1.5 × 10(10) particles per print job, representing fractions of 0.2% and 1.9% of the total number of emitted particles at room temperature. In combination with the XRF results it is concluded that solid inorganic particles contribute to LPD emissions in measurable quantities. Furthermore, for the first time Br was detected in significant concentrations in the aerosol emitted from two LPD. The analysis of several possible sources identified the plastic housings of the fuser units as main sources due to substantial Br concentrations related to brominated flame retardants.

Inhalation exposure of children to fragrances present in scented toys.

UNLABELLED When utilized in the perfuming of childrens toys, fragrances capable of inducing contact allergy in human skin may also become bioavailable to children via the inhalation route. The aim of this study was to determine the area-specific emission rates of 24 fragrances from a plasticized PVC reference material that was meant to mimic a real plastic toy. This material was introduced into an emission chamber for 28 days at handling conditions or at worst-case conditions. As a result, fragrances can be separated into three categories according to their emission rates ranging from 0.0041 to 16.2 mg/m² × h, i.e., highly volatile, semivolatile, and low-volatile compounds. Compounds of the first and second categories were monitored with decreasing emission rates. Substances of the third category were detected with increasing emission rates over time. Further, higher temperatures led to higher emission rates. The emission concentration of fragrances from four real scented toys varied between 1.10 and 107 μg/m³ at day 1 in the test chamber. Therefore, short-term inhalation exposure to fragrances originating from toys was in the range of 0.53-2700 ng/kg BW/d for the children of age 1 and older. Long-term exposure to these fragrances was calculated in the range of 2.2-220 ng/kg BW/d. PRACTICAL IMPLICATIONS Besides household products and cosmetics, fragrances can be found in toys for children. Some fragrances are known contact allergens in the skin, but there is a lack of information on their effects in the human respiratory tract. Here, we analyzed and categorized fragrances present in a plasticized PVC reference material according to their emission profiles and volatility. We also demonstrate that volatile fragrances are being emitted from real toys and thus may get inhaled under consumer conditions to different extents.

Investigations on the emissions of biocides and PCBs under low volume conditions

The aim of this study was the development of a low volume air sampling strategy for biocides and polychlorinated biphenyls (PCB) at low air change rates in modern, air-tight showcases as they are present in museums. Lindane, pentachlorophenol, dichlofluanid, tolyfluanid, isodrin, p,p-dichlorodiphenyl trichloroethane and permethrin were the biocides and PCB28 and PCB153 were the PCBs studied, all of which are semi volatile organic compounds (SVOC). Their occurrences in the museum environment originate from various sources e.g. preventive treatment of organic exhibits or organic building materials. Exhibits are long-term exposed to these pollutants due to storing in showcases or other storage equipment at low air change rates. To achieve air sampling under the aforementioned conditions the influences of temperature, air circulation, air change rate and relative humidity on the emission behavior of the selected biocides and PCBs had to be determined. This was carried out with pre-soaked wood samples in low volume air sampling experiments using 27L test showcases and 23L and 24L emission test chambers and also diffusive sampling with glass as the sampling material.

Application of a novel reference material in an international round robin test on material emissions testing

Emission testing of products is currently a rapidly increasing field of measurement activity. Labeling procedures for construction products are based on such emission test chamber measurements, and hence, measurement performance should be verified. One possible route is to conduct testing of one material in different laboratories within a round robin test (RRT), ideally using homogeneous reference materials, which can be used within interlaboratory studies or as part of the quality management system to ensure comparable results. The applicability of a lacquer system with nine added VOCs (hexanal, styrene, n-decane, limonene, 2-ethyl-1-hexanol, N-methyl-α-pyrrolidone, 2-ethylhexyl acrylate, dimethyl phthalate, and n-hexadecane) was evaluated in an international RRT with 55 participating laboratories. An intralaboratory quality check confirmed the homogeneity and reproducibility of the lacquer material for most of the compounds (RSD 5%-6%), which was confirmed in the RRT. However, emissions varied for the polar compound N-methyl-α-pyrrolidone and the higher boiling compounds 1,2-dimethyl phthalate, and n-hexadecane which could be traced back to analytical issues. In the RRT, the interlaboratory relative standard deviations (RSDs) ranged from 30% to 65% for all participants but for reference laboratories the range was between 20% and 45%.

Use of commercial radon monitors for low level radon measurements in dynamically operated VOC emission test chambers

Compared to the intended EU reference level of 300 Bq m-3 for indoor radon concentrations, the contribution of building materials appears to be low. Considering the recommended limit of 100 Bq m-3 by WHO, their contribution is supposed to be relevant, especially at low air exchange rates. This study as part of a two-part research project investigated the suitability of direct low level 222Rn measurement under simulated indoor conditions with commercial radon monitors and dynamically operated emission test chambers. Active measuring devices based on ionisation or scintillation chambers with 1-σ uncertainties below 8.6% at 20 Bq m-3 were found to be best suitable for a practical test procedure for the determination of radon exhalation rates of building materials. For the measurement of such low concentrations, the knowledge of the accurate device background level is essential.

Emissionsbegrenzung aus Laserdruckern und Kopierern

Kurzfassung Vor dem Hintergrund der notwendigen Revision der Kriterien zur Vergabe des Gütezeichens „Blauer Engel“ für Laserdrucker, Kopierer und Multifunktionsgeräte mussten auch die Prüfmethoden angepasst werden, da die alten Verfahren nicht mehr die heutigen Anforderungen an Emissionsmessungen erfüllen. In diesem Zusammenhang wurde auch das unterschiedliche Emissionsverhalten von Hardcopy-Geräten auf Grund der verschiedenen und nicht miteinander vergleichbaren Prüfverfahren heftig diskutiert. Aus diesen Gründen wurde ein neues Prüfverfahren entwickelt, mit dem eine verlässliche und reproduzierbare Prüfung der Emissionsraten von Staub, Ozon und flüchtigen organischen Verbindungen auf der Basis des ECMA (European Computer Manufacturer Association) Standards 328 möglich ist. Dazu wurden neun verschiedene Geräte unter verschiedenen Bedingungen untersucht. Als ein Ergebnis dieser Studie wurden neue Kriterien zur Vergabe des „Blauen Engels“ für Kopierer, Drucker und Multifunktionsgeräte festgelegt.