Özgür Uzun

Structural effects of sodium hypochlorite solution on RaCe rotary nickel-titanium instruments: an atomic force microscopy study

OBJECTIVE The aim of this study was to investigate the effect of sodium hypochlorite immersion on the surface characteristics of RaCe rotary nickel-titanium instruments using atomic force microscopy (AFM). STUDY DESIGN Four new RaCe instruments were used in this study (two 30.06 and two 30.02). One 30.06 and one 30.02 instrument were immersed in sodium hypochlorite solution for 5 min. Surface topography of the instruments was evaluated using the AFM. The instruments were analyzed on 11 points along a 3-mm section. Root mean square (RMS) values were used to compare the topographic deviations. The data were analyzed using Student t test. RESULTS Mean RMS values for NaOCl measurements were higher than the measurements on new files, and the difference was statistically significant (P < .01). CONCLUSION The AFM results show that NaOCl causes deterioration on the surface of RaCe instruments and should be used with care during clinical use because of the risk of unexpected failure.

Accuracy of two apex-locating handpieces in detecting simulated vertical and horizontal root fractures.

The aim of this study was to evaluate in vitro the effectiveness of TCM Endo V and Tri Auto ZX handpieces in detecting simulated horizontal and vertical root fractures. Forty extracted maxillary incisor teeth were randomly divided into 2 groups as simulated incomplete horizontal and vertical root fractures. Auto reverse and electronic apex locator functions of the 2 handpieces were used in both groups. Repeated measures of analysis test and pairwise comparisons were used for statistical analyses. Both handpieces detected the root fractures in an acceptable range. Furthermore, electronic apex locator function of both devices was more efficient in the process than auto reverse function.

Microhardness of Packable Composites Used as Posts Condensed with Different Methods

The purpose of this in vitro study was to evaluate the microhardness of packable composite compacted with hand or ultrasonic pluggers in post spaces. A total of 168 extracted human anterior teeth were prepared with Gates Glidden and ParaPost drills after obturation. A primer and a dentin-bonding agent were applied to the etched surface. Half of the specimens were compacted with an ultrasonic tip and the other half with a mechanical hand compactor and all specimens were polymerized for each increment. The roots were then sectioned horizontally from 0, 2.5, 3, 3.5, 4, 4.5, and 5 mm starting from the coronal and sliced 2.5-mm long. The microhardness test was applied to each specimen. There were statistically significant differences between ultrasonically and hand-condensed groups in whole specimens (p < 0.001). There were no significant differences between groups of 0, 2.5, and 3 mm until 3.5 mm was reached. After 3.5-mm depth, there were significant differences between the groups (p < 0.001). Ultrasonic condensation of packable composites provided mechanical advantage over hand condensation in root canals measuring microhardness in different depths. However, when microhardness was measured at different depths, values decreased after the depth of 3.5 mm in both condensation groups.

The effect of residual calcium hydroxide on the accuracy of a contemporary electronic apex locator.

Abstract Objective. The aim of this study was to evaluate the effect of residual calcium hydroxide [Ca(OH)2] on the accuracy of an electronic apex locator (EAL). Materials and methods. Working lengths (WLs) of 56 extracted maxillary incisors were determined initially by two different methods. The first method used the ‘APEX’ reading of the EAL as a reference point, 0.5 mm was subtracted and recorded as WL0. The second method used the ‘0.5’ reading and the score was recorded as WL0.5 without subtraction. The roots were prepared to WL0 and divided randomly into three experimental groups (n = 16) (1 mm in group A, 2 mm in group B and 4 mm in group C) and a control (n = 8). Specimens in all experimental groups were filled with Ca(OH)2 paste. Following its removal, WLs were re-determined with the same methods. Results. In group C, pre/post WLs were significantly different (p < 0.05). No significant difference was observed between the other experimental groups and the control group. Conclusion. Accuracy of EAL decreased proportionally with the amount of paste remaining at the ±0.5-mm tolerance level. Ca(OH)2 paste remnants may cause incorrect EAL readings.

Volumetric Evaluation of Void/Gap Formation and Microleakage Cementing Fiber Posts on Extracted Teeth with Three Different Cements: Void Formation and Microleakage

PURPOSE To evaluate microleakage in roots restored with fiber posts cemented using three different luting cements, to measure the volume of voids/gaps within the obturated/postcemented root canals, and to examine whether microleakage and the volume of voids/gaps were correlated. MATERIALS AND METHODS Thirty-six extracted human mandibular incisors were decoronated, and the root canals were obturated using gutta-percha and sealer in the experimental groups (n = 30). Six roots were used as controls. A standard post space was prepared, and an identically sized fiber post was cemented in each experimental specimen using one of three luting cements (Panavia F2.0, Bifix SE, GC FujiCEM; n = 10 each). The specimens were scanned using micro-computed tomography, and the volume of voids/gaps was determined. The specimens were then subjected to a fluid filtration assay to evaluate microleakage. RESULTS The volume of voids/gaps was significantly lower in the GC FujiCEM group, and significantly less microleakage occurred in the Bifix SE group compared with other groups (both p < 0.001). A significant correlation between the volume of voids/gaps and leakage was found only in the Panavia F2.0 group (p = 0.003; r = 0.830). No such correlation was found in the analysis of all groups combined. CONCLUSIONS The group with the greatest volume of voids/gaps (Bifix SE) showed the least microleakage, and the group with the smallest volume of voids/gaps (GC FujiCEM) showed the most microleakage. Panavia F2.0 ranked between and exhibited significant correlation.

Effects of dissolving solutions on the accuracy of an electronic apex locator-integrated endodontic handpiece.

The effects of three dissolving agents on the accuracy of an electronic apex locator- (EAL-) integrated endodontic handpiece during retreatment procedures were evaluated. The true lengths (TLs) of 56 extracted incisor teeth were determined visually. Twenty teeth were filled with gutta-percha and a resin-based sealer (group A), 20 with gutta-percha and a zinc oxide/eugenol-based sealer (group B), and 16 roots were used as the control group (group C). All roots were prepared to TL. Guttasolv, Resosolv, and Endosolv E were used as the dissolving solutions. Two evaluations of the handpiece were performed: the apical accuracy during the auto reverse function (ARL) and the apex locator function (EL) alone. The ARL function of the handpiece gave acceptable results. There were significant differences between the EL mode measurements and the TL (P < 0.05). In these comparisons, Tri Auto ZX EL mode measurements were significantly shorter than those of the TL.