Güliz Görgül

Effects of Er:YAG laser and Nd:YAG laser treatment on the root canal dentin of human teeth: a SEM study

The objective of the study was to observe the morphological changes on root canal dentin after Er:YAG laser and Nd:YAG laser treatment. Twenty-one teeth biomechanically prepared were divided into three groups with seven teeth of each. Group A was unlased as a control. In group B, Er:YAG laser and in group C, Nd:YAG laser was applied to the root canal dentin. The roots were split longitudinally and examined using a scanning electron microscopy for the evaluation of debris, smear layer, and recrystallization. There was no statistically significant difference between the groups. This study indicates that laser beam is not effective in removing debris and smear layer.

Fracture resistance of thin‐walled roots restored with different post systems

AIM To compare the fracture resistance of thin-walled roots after restoration with different types of post systems. METHODOLOGY One hundred and sixty-five decoronated maxillary central incisors were root filled and randomly assigned to three groups with respect to the remaining dentine thickness of root (1.0 mm, 1.5 mm, 2.0 mm). Each group was randomly divided into five equal subgroups. The subgroups were restored with one of the following post systems: polyethylene woven fibre (R), composite resin cured by light-transmitting post + glass fibre post (L), electrical glass fibre post (E), composite corono-radicular restoration (C) and cast metal post (M). Standard cores were constructed using composite resin in the first four groups. The samples were subjected to a gradually increasing force (1 mm min(-1)). The force required to fracture was recorded. The data was analysed with anova and Tukey test (P = 0.05). RESULTS The cast metal post group had the highest fracture strength (P < 0.001). There was no significant difference in fracture resistance between the other four groups. Fracture resistance was affected largely by the remaining dentine thickness in fibre post groups; however, the difference was not significant. On the contrary in the cast metal post group load failure was inversely influenced by axio-proximal dimension of dentine walls. CONCLUSION The cast post group had a higher fracture strength than resin groups. The force required to fracture the roots was similar for all fibre post systems and for all dentine thicknesses.

Evaluation of diagnostic radiopaque contrast materials used with calcium hydroxide

An evaluation of three different radiopaque materials used in combination with calcium hydroxide powder for diagnostic contrast was made. Diatrizoate meglumine (65%) and iothalamate meglumine (60%) compared favorably with barium sulfate (35%). Since barium sulfate has demonstrated problems by altering the manipulative properties of calcium hydroxide as well as demonstrating a residual radiopacity, there may be advantages to the use of resorbable diatrizoate or iothalamate compounds as alternatives. These soluble iodine compounds also make possible an excellent aqueous medium in which to mix calcium hydroxide.

Effects of different irrigation solutions on root dentine microhardness, smear layer removal and erosion

This study aimed to compare the effects of different irrigants on root dentine microhardness, erosion and smear layer removal. A total of 72 root dentine slices were divided into six groups, according to the final irrigants used: Group 1: 17% ethylenediamine tetra-acetic acid (EDTA) + 2.5% NaOCl, Group 2: 7% maleic acid (MA) + 2.5% sodium hypochloride (NaOCl), Group 3: 1.3% NaOCl + mixture of tetracycline, acid and detergent (MTAD), Group 4: Smear Clear + 2.5% NaOCl, Group 5: 5% NaOCl, Group 6: saline. Vickers microhardness values were measured before and after treatment. In total, 42 root-halves were prepared for scanning electron microscope to evaluate the amount of smear and erosion in the coronal, middle and apical thirds. Data were analysed using two-way anova, Duncan and two-proportion z-tests. Maleic acid showed the greatest reduction in dentine microhardness (P < 0.05), followed by EDTA and MTAD. EDTA, maleic acid, MTAD and Smear Clear removed smear layer efficiently in the coronal and middle thirds of root canal. However, in the apical region, maleic acid showed more efficient removal of the smear layer than the other irrigants (P < 0.05).

The Effects of Sodium Hypochloride Concentrations on the Accuracy of an Apex Locating Device

This study aimed to evaluate Root ZX accuracy with different NaOCl concentrations and to observe effects of the alginate model when NaOCl was used in the canal during electronic measurements. Fifty extracted single-rooted, single-canal human teeth were used in five experimental groups. NaOCl concentrations of 5.25%, 2.65%, 1.00%, and 0.50%, respectively, were injected into the root canals of teeth in four groups and distilled water in control group 5. After measuring root lengths with Root ZX, the files were locked in place. There were no statistically significant differences among all the groups (p > 0.95) when evaluating the distance of the file tips and apical constriction or for the distance from file tip to apical foramen. Root ZX could be used in root canal length measurements with various NaOCl concentrations. Designation of apical constriction needs more care. The alginate model could be used for in vitro electronic measurements with various NaOCl concentrations.

Lactate dehydrogenase activity in periodontal ligament cells stored in different transport media.

BACKGROUND Maintaining viability of periodontal ligament cells is important after an avulsion injury occurs. OBJECTIVE This study examined cell death and compared different transport media at varying times. Lactate dehydrogenase (LD) measurements were made on root surfaces of extracted teeth for evaluating the results of breakdown and necrosis of periodontal ligament cells. STUDY DESIGN Teeth were divided into three groups. Each was immersed in one of the following storage media: Hanks balanced salt solution, Custodiol solution (an organ storage medium), or sterile saline solution. I.D. measurements (an indicator of cell death) were made at 2, 6, 24, 72, and 168 hours after extraction. RESULTS When the LD levels were compared according to the time periods, a progressive increase of cell death was found to be statistically significant (p < 0.001). However, when the effects of both time periods and the kind of storage medium on the LD levels were examined, the LD levels of the saline solution storage medium were found to be significantly higher (p < 0.001) than that of the other two groups. CONCLUSIONS Both Hanks balanced salt solution and Custodiol appeared to be suitable transport media for maintaining cell viability, whereas saline solution was not.

Effect of light-activated bleaching on pulp chamber temperature rise: An in vitro study

This study aimed to compare the pulp chamber temperature changes that occur with the use of different light sources during vital bleaching with and without application of bleaching agents. One hundred and forty-four mandibular incisor teeth were divided into four groups (n = 36) according to the use of halogen light, light-emitting diode, 3 W and 1.5 W diode laser. The teeth in the main groups were divided into three subgroups (n = 12). First subgroup had no bleaching gel application. By White and Whiteness HP were applied with a thickness of 2 mm to the other subgroups respectively. The labial surfaces of the teeth were irradiated with a total time of 20 s. Temperature changes in the pulp chamber were measured and analysed by using anova and Tukey test. The 3 W diode laser induced the highest pulp chamber temperature rise (P = 0.000). Bleaching gel application reduced the temperature changes in the diode laser groups (P < 0.05). Diode laser activation during vital bleaching induces pulp chamber temperature rise, which may cause thermal tissue damage.

Effects of sodium hypochlorite on gutta-percha and Resilon cones: An atomic force microscopy and scanning electron microscopy study

The aim of this study was to evaluate the effects of 6% sodium hypochlorite (NaOCl) on gutta-percha (GP) and Resilon cones. Six standardized GP and Resilon cones were selected and cut 3mm from their tip. One GP and 1 Resilon cone were used as control samples. Cones were immersed in 6% NaOCl for 1, 5, 10, 20, and 30 minutes, thoroughly rinsed with nanopure water, and dried with filter paper. Then, surface topography was analyzed by atomic force microscopy and scanning electron microscopy coupled to an energy-dispersive x-ray (EDX) spectrometer. According to the root mean square and depth analysis values obtained from atomic force microscopic evalution, there were no significant differences found among the GP groups. However significant differences were found among Resilon cones (P ≤ .05). SEM images and EDX graphics showed that there were no prominent differences between GP and Resilon groups. These results showed that 6% NaOCl solution can be used in the disinfection of GP and Resilon cones. No alterations were observed on the GP cones, but it can change the surface of Resilon cones.

Accuracy of two apex-locating handpieces in detecting simulated vertical and horizontal root fractures.

The aim of this study was to evaluate in vitro the effectiveness of TCM Endo V and Tri Auto ZX handpieces in detecting simulated horizontal and vertical root fractures. Forty extracted maxillary incisor teeth were randomly divided into 2 groups as simulated incomplete horizontal and vertical root fractures. Auto reverse and electronic apex locator functions of the 2 handpieces were used in both groups. Repeated measures of analysis test and pairwise comparisons were used for statistical analyses. Both handpieces detected the root fractures in an acceptable range. Furthermore, electronic apex locator function of both devices was more efficient in the process than auto reverse function.

Effect of post‐space treatments on the push‐out bond strength and failure modes of glass fibre posts

The aim of this study was to evaluate the effect of different post-space treatments on the push-out bond strength and failure modes of glass fibre posts. Forty mandibular premolar roots were cut and endodontically treated. Post spaces were prepared and roots were divided into four groups. In group 1 distilled water irrigation (control), in group 2 2.25% NaOCl irrigation, in group 3 2.25% NaOCl + 17% EDTA irrigation were done and in group 4 diode laser was applied to the prepared post spaces. Scanning electron microscope (SEM) analysis was made for each group. Fibre posts were then luted with resin cement. Each root was prepared for push-out test. Data were statistically analysed with anova (P = 0.05). After push-out test, the failure modes were observed but not statistically analysed. There were statistically significant differences between Group 3 and Group 2 in both regions (P < 0.05), also in the middle region of Group 4 and Group 2 (P < 0.05). Cervical root segments showed higher bond strengths than middle ones in all groups (P < 0.05). The highest bond strength values were obtained from NaOCl/EDTA and the lowest bond strength values were obtained from NaOCl for both regions.