Pierre L. Levesque

Photooxidation and quantum confinement effects in exfoliated black phosphorus

Thin layers of black phosphorus have recently raised interest owing to their two-dimensional (2D) semiconducting properties, such as tunable direct bandgap and high carrier mobilities. This lamellar crystal of phosphorus atoms can be exfoliated down to monolayer 2D-phosphane (also called phosphorene) using procedures similar to those used for graphene. Probing the properties has, however, been challenged by a fast degradation of the thinnest layers on exposure to ambient conditions. Herein, we investigate this chemistry using in situ Raman and transmission electron spectroscopies. The results highlight a thickness-dependent photoassisted oxidation reaction with oxygen dissolved in adsorbed water. The oxidation kinetics is consistent with a phenomenological model involving electron transfer and quantum confinement as key parameters. A procedure carried out in a glove box is used to prepare mono-, bi- and multilayer 2D-phosphane in their pristine states for further studies on the effect of layer thickness on the Raman modes. Controlled experiments in ambient conditions are shown to lower the A(g)(1)/A(g)(2) intensity ratio for ultrathin layers, a signature of oxidation.

Probing Charge Transfer at Surfaces Using Graphene Transistors

Graphene field effect transistors (FETs) are extremely sensitive to gas exposure. Charge transfer doping of graphene FETs by atmospheric gas is ubiquitous but not yet understood. We have used graphene FETs to probe minute changes in electrochemical potential during high-purity gas exposure experiments. Our study shows quantitatively that electrochemistry involving adsorbed water, graphene, and the substrate is responsible for doping. We not only identify the water/oxygen redox couple as the underlying mechanism but also capture the kinetics of this reaction. The graphene FET is highlighted here as an extremely sensitive potentiometer for probing electrochemical reactions at interfaces, arising from the unique density of states of graphene. This work establishes a fundamental basis on which new electrochemical nanoprobes and gas sensors can be developed with graphene.

Graphene field effect transistors with parylene gate dielectric

We report the fabrication and characterization of graphene field effect transistors with parylene back gate and exposed graphene top surface. A back gate stack of 168 nm parylene on 94 nm thermal silicon oxide permitted optical reflection microscopy to be used for identifying exfoliated graphene flakes. Room temperature mobilities of 10 000 cm2/Vs at 1012/cm2 electron/hole densities were observed in electrically contacted graphene. Parylene gated devices exhibited stable neutrality point gate voltage under ambient conditions and less hysteresis than that observed in graphene flakes directly exfoliated on silicon oxide.

Direct oriented growth of armchair graphene nanoribbons on germanium

Graphene can be transformed from a semimetal into a semiconductor if it is confined into nanoribbons narrower than 10 nm with controlled crystallographic orientation and well-defined armchair edges. However, the scalable synthesis of nanoribbons with this precision directly on insulating or semiconducting substrates has not been possible. Here we demonstrate the synthesis of graphene nanoribbons on Ge(001) via chemical vapour deposition. The nanoribbons are self-aligning 3° from the Ge〈110〉 directions, are self-defining with predominantly smooth armchair edges, and have tunable width to <10 nm and aspect ratio to >70. In order to realize highly anisotropic ribbons, it is critical to operate in a regime in which the growth rate in the width direction is especially slow, <5 nm h−1. This directional and anisotropic growth enables nanoribbon fabrication directly on conventional semiconductor wafer platforms and, therefore, promises to allow the integration of nanoribbons into future hybrid integrated circuits.

No Graphene Etching in Purified Hydrogen

A systematic study has been conducted to investigate the role of hydrogen in the etching reaction of graphene films grown on copper foils. The results at 825 °C and 500 mTorr showed no evidence of graphene etching by purified ultrahigh purity (UHP)-grade hydrogen, whereas graphene films exposed to unpurified UHP-grade hydrogen were considerably etched due to the presence of oxygen or other oxidizing impurities. This finding reveals not only the major impact of oxidizing impurities in the graphene etching reaction, but also entails understanding and controlling the graphene chemical vapor deposition mechanism on copper substrates.

Double aberration correction in a low-energy electron microscope

The lateral resolution of a surface sensitive low-energy electron microscope (LEEM) has been improved below 4 nm for the first time. This breakthrough has only been possible by simultaneously correcting the unavoidable spherical and chromatic aberrations of the lens system. We present an experimental criterion to quantify the aberration correction and to optimize the electron optical system. The obtained lateral resolution of 2.6 nm in LEEM enables the first surface sensitive, electron microscopic observation of the herringbone reconstruction on the Au(111) surface.

Synthesis of Antimonene on Germanium

The lack of large-area synthesis processes on substrates compatible with industry requirements has been one of the major hurdles facing the integration of 2D materials in mainstream technologies. This is particularly the case for the recently discovered monoelemental group V 2D materials which can only be produced by exfoliation or growth on exotic substrates. Herein, to overcome this limitation, we demonstrate a scalable method to synthesize antimonene on germanium substrates using solid-source molecular beam epitaxy. This emerging 2D material has been attracting a great deal of attention due to its high environmental stability and its outstanding optical and electronic properties. In situ low energy electron microscopy allowed the real time investigation and optimization of the 2D growth. Theoretical calculations combined with atomic-scale microscopic and spectroscopic measurements demonstrated that the grown antimonene sheets are of high crystalline quality, interact weakly with germanium, exhibit semimetallic characteristics, and remain stable under ambient conditions. This achievement paves the way for the integration of antimonene in innovative nanoscale and quantum technologies compatible with the current semiconductor manufacturing.

Quantum hall effect in hydrogenated graphene

The quantum Hall effect is observed in a two-dimensional electron gas formed in millimeter-scale hydrogenated graphene, with a mobility less than 10  cm2/V·s and corresponding Ioffe-Regel disorder parameter (k(F)λ)(-1) ≫ 1. In a zero magnetic field and low temperatures, the hydrogenated graphene is insulating with a two-point resistance of the order of 250h/e2. The application of a strong magnetic field generates a negative colossal magnetoresistance, with the two-point resistance saturating within 0.5% of h/2e2 at 45 T. Our observations are consistent with the opening of an impurity-induced gap in the density of states of graphene. The interplay between electron localization by defect scattering and magnetic confinement in two-dimensional atomic crystals is discussed.

Dynamics and Mechanisms of Exfoliated Black Phosphorus Sublimation

We report on real time observations of the sublimation of exfoliated black phosphorus layers throughout annealing using in situ low energy electron microscopy. We found that sublimation manifests itself above 375 ± 20 °C through the nucleation and expansion of asymmetric, faceted holes with the long axis aligned along the [100] direction and sharp tips defined by edges consisting of alternating (10) and (11) steps. This thermally activated process repeats itself via successive sublimation of individual layers. Calculations and simulations using density functional theory and kinetic Monte Carlo allowed to determine the involved atomic pathways. Sublimation is found to occur via detachments of phosphorus dimers rather than single atoms. This behavior and the role of defects is described using an analytical model that captures all essential features. This work establishes an atomistic-level understanding of the thermal stability of exfoliated black phosphorus and defines the temperature window available for material and device processing.

High-field response of gated graphene at terahertz frequencies

We study the Fermi energy level dependence of nonlinear terahertz (THz) transmission of gated multi-layer and single-layer graphene transferred onto sapphire and quartz substrates. The two samples represent two limits of low-field impurity scattering: short-range neutral and long-range charged impurity scattering, respectively. We observe an increase in the transmission as the field amplitude is increased due to intraband absorption bleaching starting at fields above 8 kV/cm. This e↵ect arises from a field-induced reduction in THz conductivity that depends strongly on the Fermi energy. We account for intraband absorption using a free carrier Drude model that includes neutral and charged impurity scattering as well as optical phonon scattering. We find that although the Fermi-level dependence in the monolayer and five-layer samples is quite di↵erent, both exhibit a strong dependence on the field amplitude that cannot be explained on the basis of an increase in the lattice temperature alone. Our results provide a deeper understanding of transport in graphene devices operating at THz frequencies and in modest kV/cm field strengths where nonlinearities exist.