Rafael Libanori

Composites Reinforced in Three Dimensions by Using Low Magnetic Fields

Dispersal in 3D The fabrication of composites containing small proportions of nanoparticles is limited by the ability to disperse the particles uniformly in all three dimensions. Erb et al. (p. 199; see the Perspective by Fratzl) describe a process for creating nanoparticle composites in which a magnetic field is used to align the nanoparticles. Surprisingly, the magnetic alignment of iron-oxide functionalized nanorods and discs was enabled using very small magnetic fields and low-volume fractions of magnetic nanoparticles, which allowed control of the orientation of the nanorods and discs three-dimensionally. Iron oxide−coated rods and platelets can reinforce a polymer composite through alignment with magnetic fields. The orientation and distribution of reinforcing particles in artificial composites are key to enable effective reinforcement of the material in mechanically loaded directions, but remain poor if compared to the distinctive architectures present in natural structural composites such as teeth, bone, and seashells. We show that micrometer-sized reinforcing particles coated with minimal concentrations of superparamagnetic nanoparticles (0.01 to 1 volume percent) can be controlled by using ultralow magnetic fields (1 to 10 milliteslas) to produce synthetic composites with tuned three-dimensional orientation and distribution of reinforcements. A variety of structures can be achieved with this simple method, leading to composites with tailored local reinforcement, wear resistance, and shape memory effects.

Stretchable heterogeneous composites with extreme mechanical gradients

Heterogeneous composite materials with variable local stiffness are widespread in nature, but are far less explored in engineering structural applications. The development of heterogeneous synthetic composites with locally tuned elastic properties would allow us to extend the lifetime of functional devices with mechanically incompatible interfaces, and to create new enabling materials for applications ranging from flexible electronics to regenerative medicine. Here we show that heterogeneous composites with local elastic moduli tunable over five orders of magnitude can be prepared through the site-specific reinforcement of an entangled elastomeric matrix at progressively larger length scales. Using such a hierarchical reinforcement approach, we designed and produced composites exhibiting regions with extreme soft-to-hard transitions, while still being reversibly stretchable up to 350%. The implementation of the proposed methodology in a mechanically challenging application is illustrated here with the development of locally stiff and globally stretchable substrates for flexible electronics.

Mechanics of Platelet-Reinforced Composites Assembled Using Mechanical and Magnetic Stimuli

Current fabrication technologies of structural composites based on the infiltration of fiber weaves with a polymeric resin offer good control over the orientation of long reinforcing fibers but remain too cumbersome and slow to enable cost-effective manufacturing. The development of processing routes that allow for fine control of the reinforcement orientation and that are also compatible with fast polymer processing technologies remains a major challenge. In this paper, we show that bulk platelet-reinforced composites with tailored reinforcement architectures and mechanical properties can be fabricated through the directed-assembly of inorganic platelets using combined magnetic and mechanical stimuli. The mechanical performance and fracture behavior of the resulting composites under compression and bending can be deliberately tuned by assembling the platelets into designed microstructures. By combining high alignment degree and volume fractions of reinforcement up to 27 vol %, we fabricated platelet-reinforced composites that can potentially be made with cost-effective polymer processing routes while still exhibiting properties that are comparable to those of state-of-the-art glass-fiber composites.

Locally reinforced polymer-based composites for elastic electronics.

A promising approach to fabricating elastic electronic systems involves processing thin film circuits directly on the elastic substrate by standard photolithography. Thin film devices are generally placed onto stiffer islands on the substrate surface to protect devices from excessive strain while still achieving a globally highly deformable system. Here we report a new method to achieve island architectures by locally reinforcing polymeric substrates at the macro- and microscale using magnetically responsive anisotropic microparticles. We demonstrate that the resulting particle-reinforced elastic substrates can be made smooth enough for the patterning and successful operation of thin film transistors with transfer characteristics comparable to state-of-the-art devices.

Hierarchically roughened microplatelets enhance the strength and ductility of nacre-inspired composites.

Rough interfaces featuring nanoscale asperities are known to play a major role in the mechanics of nacre. Transferring this concept to artificial bioinspired composites requires a detailed understanding about the effect of the surface topography of reinforcing elements on the mechanical performance of such materials. To gain further insights into the effect of asperity size, hierarchy and coverage on the mechanics of nacre-inspired composites, we decorate alumina microplatelets with silica nanoparticles of selected sizes and use the resulting roughened platelets as reinforcing elements (15vol%) in a commercial epoxy matrix. For a single layer of silica nanoparticles on the platelet surface, increased ultimate strain and toughness are obtained with a large roughening particle size of 250nm. On the contrary, strength and stiffness are enhanced by decreasing the size of asperities using 22nm silica particles. By combining particles of two different sizes (100nm and 22nm) in a hierarchical fashion, we are able to improve stiffness and strength of platelet-reinforced polymers while maintaining high ultimate strain and toughness. Our results indicate that carefully designed hierarchically roughened interfaces lead to a more homogeneous stress distribution within the polymer matrix between the stiff reinforcing elements. By enabling the deformation of a larger fraction of the polymer matrix, this design concept improves the mechanical response of bioinspired composites and can possibly also be exploited to enhance the performance of conventional fiber-reinforced polymers.

Unifying Model for the Electrokinetic and Phase Behavior of Aqueous Suspensions Containing Short and Long Amphiphiles

Aqueous suspensions containing oppositely charged colloidal particles and amphiphilic molecules can form fluid dispersions, foams, and percolating gel networks, depending on the initial concentration of amphiphiles. While models have been proposed to explain the electrokinetic and flotation behavior of particles in the presence of long amphiphilic molecules, the effect of amphiphiles with less than six carbons in the hydrocarbon tail on the electrokinetic, rheological, and foaming behavior of aqueous suspensions remains unclear. Unlike conventional long amphiphiles (≥10 carbons), short amphiphiles do not exhibit increased adsorption on the particle surface when the number of carbons in the molecule tail is increased. On the basis of classical electrical double layer theory and the formerly proposed hemimicelle concept, we put forward a new predictive model that reconciles the adsorption and electrokinetic behavior of colloidal particles in the presence of long and short amphiphiles. By introducing in the classical Gouy-Chapman theory an energy term associated with hydrophobic interactions between the amphiphile hydrocarbon tails, we show that amphiphilic electrolytes lead to a stronger compression of the diffuse part of the electrical double layer in comparison to hydrophilic electrolytes. Scaling relationships derived from this model provide a quantitative description of the rich phase behavior of the investigated suspensions, correctly accounting for the effect of the alkyl chain length of short and long amphiphiles on the electrokinetics of such colloidal systems. The proposed model contributes to our understanding of the stabilization mechanisms of particle-stabilized foams and emulsions and might provide new insights into the physicochemical processes involved in mineral flotation.

Mineral Nano-Interconnectivity Stiffens and Toughens Nacre-like Composite Materials

Bulk nacre-like composites with mineral nano-interconnectivity at the same length scale as in the biological material are produced using magnetic alignment and selective sintering techniques. These materials display stiffness and strength levels comparable to that of continuous fiber composites with the advantage of easier processability inherent of discontinuous composites. This opens new possibilities to produce parts with more complex designs.

Ultrahigh Magnetically Responsive Microplatelets with Tunable Fluorescence Emission

Tuning the optical properties of suspensions by controlling the orientation and spatial distribution of suspended particles with magnetic fields is an interesting approach to creating magnetically controlled displays, microrheology sensors, and materials with tunable light emission. However, the relatively high concentration of magnetic material required to manipulate these particles very often reduces the optical transmittance of the system. In this study, we describe a simple method of generating particles with magnetically tunable optical properties via sol-gel deposition and functionalization of a continuous layer of silica on ultrahigh magnetically responsive (UHMR) alumina microplatelets. UHMR microplatelets with tunable magnetic response in the range of 15-36 G are obtained by the electrostatic adsorption of 2 to 13% of superparamagnetic iron oxide nanoparticles (SPIONs) on the alumina surface. The magnetized platelets are coated with a 20-50 nm layer of SiO2 through the controlled hydrolysis and condensation reactions of tetraethylorthosilicate (TEOS) in an NH3/ethanol mixture. Finally, the silica surface is covalently modified with an organic fluorescent dye by conventional silane chemistry. Because of the anisotropic shape of the particles, control of their orientation and distribution using magnetic fields and field gradients enables easy tuning of the optical properties of the suspension. This strategy allows us to gain both spatial and temporal control over the fluorescence emission from the particle surface, making the multifunctional platelets interesting building blocks for the manipulation of light in colloid-based smart optical devices and sensors.

Composites reinforced via mechanical interlocking of surface-roughened microplatelets within ductile and brittle matrices

Load-bearing reinforcing elements in a continuous matrix allow for improved mechanical properties and can reduce the weight of structural composites. As the mechanical performance of composite systems are heavily affected by the interfacial properties, tailoring the interactions between matrices and reinforcing elements is a crucial problem. Recently, several studies using bio-inspired model systems suggested that interfacial mechanical interlocking is an efficient mechanism for energy dissipation in platelet-reinforced composites. While cheap and effective solutions are available at the macroscale, the modification of surface topography in micron-sized reinforcing elements still represents a challenging task. Here, we report a simple method to create nanoasperities with tailored sizes and densities on the surface of alumina platelets and investigate their micromechanical effect on the energy dissipation mechanisms of nacre-like materials. Composites reinforced with roughened platelets exhibit improved mechanical properties for both organic ductile epoxy and inorganic brittle cement matrices. Mechanical interlocking increases the modulus of toughness (area under the stress-strain curve) by 110% and 56% in epoxy and cement matrices, respectively, as compared to those reinforced with flat platelets. This interlocking mechanism can potentially lead to a significant reduction in the weight of mechanical components while retaining the structural performance required in the application field.

Dynamics of Cellulose Nanocrystal Alignment during 3D Printing

The alignment of anisotropic particles during ink deposition directly affects the microstructure and properties of materials manufactured by extrusion-based 3D printing. Although particle alignment in diluted suspensions is well described by analytical and numerical models, the dynamics of particle orientation in the highly concentrated inks typically used for printing via direct ink writing (DIW) remains poorly understood. Using cellulose nanocrystals (CNCs) as model building blocks of increasing technological relevance, we study the dynamics of particle alignment under the shear stresses applied to concentrated inks during DIW. With the help of in situ polarization rheology, we find that the time period needed for particle alignment scales inversely with the applied shear rate and directly with the particle concentration. Such dependences can be quantitatively described by a simple scaling relation and qualitatively interpreted in terms of steric and hydrodynamic interactions between particles at high shear rates and particle concentrations. Our understanding of the alignment dynamics is then utilized to estimate the effect of shear stresses on the orientation of particles during the printing process. Finally, proof-of-concept experiments show that the combination of shear and extensional flow in 3D printing nozzles of different geometries provides an effective means to tune the orientation of CNCs from fully aligned to core-shell architectures. These findings offer powerful quantitative guidelines for the digital manufacturing of composite materials with programmed particle orientations and properties.