Renato Roperto

Measurement of J-integral in CAD/CAM dental ceramics and composite resin by digital image correlation

Ceramic and composite resin blocks for CAD/CAM machining of dental restorations are becoming more common. The sample sizes affordable by these blocks are smaller than ideal for stress intensity factor (SIF) based tests. The J-integral measurement calls for full field strain measurement, making it challenging to conduct. Accordingly, the J-integral values of dental restoration materials used in CAD/CAM restorations have not been reported to date. Digital image correlation (DIC) provides full field strain maps, making it possible to calculate the J-integral value. The aim of this study was to measure the J-integral value for CAD/CAM restorative materials. Four types of materials (sintered IPS E-MAX CAD, non-sintered IPS E-MAX CAD, Vita Mark II and Paradigm MZ100) were used to prepare beam samples for three-point bending tests. J-integrals were calculated for different integral path size and locations with respect to the crack tip. J-integral at path 1 for each material was 1.26±0.31×10(-4)MPam for MZ 100, 0.59±0.28×10(-4)MPam for sintered E-MAX, 0.19±0.07×10(-4)MPam for VM II, and 0.21±0.05×10(-4)MPam for non-sintered E-MAX. There were no significant differences between different integral path size, except for the non-sintered E-MAX group. J-integral paths of non-sintered E-MAX located within 42% of the height of the sample provided consistent values whereas outside this range resulted in lower J-integral values. Moreover, no significant difference was found among different integral path locations. The critical SIF was calculated from J-integral (KJ) along with geometry derived SIF values (KI). KI values were comparable with KJ and geometry based SIF values obtained from literature. Therefore, DIC derived J-integral is a reliable way to assess the fracture toughness of small sized specimens for dental CAD/CAM restorative materials; however, with caution applied to the selection of J-integral path.

Effect of different adhesive strategies on microtensile bond strength of computer aided design/computer aided manufacturing blocks bonded to dentin.

Background: The aim of this study was to determine the microtensile bond strength (μTBS) of ceramic and composite computer aided design-computer aided manufacturing (CAD-CAM) blocks bonded to dentin using different adhesive strategies. Materials and Methods: In this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junction to produce flat dentin surfaces. Ceramic and composite CAD/CAM blocks, size 14, were sectioned into slices of 3 mm thick. Before bonding, CAD/CAM block surfaces were treated according to the manufacturers instructions. Groups were created based on the adhesive strategy used: Group 1 (GI) - conventional resin cement + total-etch adhesive system, Group 2 (GII) - conventional resin cement + self-etch adhesive system, and Group 3 (GIII) - self-adhesive resin cement with no adhesive. Bonded specimens were stored in 100% humidity for 24h at 37΀C, and then sectioned with a slow-speed diamond saw to obtain 1 mm × 1 mm × 6 mm microsticks. Microtensile testing was then conducted using a microtensile tester. μTBS values were expressed in MPa and analyzed by one-way ANOVA with post hoc (Tukey) test at the 5% significance level. Results: Mean values and standard deviations of μTBS (MPa) were 17.68 (±2.71) for GI/ceramic; 17.62 (±3.99) for GI/composite; 13.61 (±6.92) for GII/composite; 12.22 (±4.24) for GII/ceramic; 7.47 (±2.29) for GIII/composite; and 6.48 (±3.10) for GIII/ceramic; ANOVA indicated significant differences among the adhesive modality and block interaction (P < 0.05), and no significant differences among blocks only, except between GI and GII/ceramic. Bond strength of GIII was consistently lower (P < 0.05) than GI and GII groups, regardless the block used. Conclusion: Cementation of CAD/CAM restorations, either composite or ceramic, can be significantly affected by different adhesive strategies used.

Are different generations of CAD/CAM milling machines capable to produce restorations with similar quality?

Background Different CAD/CAM machines’ generation may impact the restoration overall quality. The present study evaluated the marginal fit of CAD/CAM restorations manufactured with different generations of CEREC milling unit systems. Material and Methods Sixteen typodont teeth were divided into two groups (n=8) according to the machine’s generation assigned. These are control group (G1): Cerec AC with Bluecam/Cerec 3 milling unit and (G2): Cerec AC with Bluecam/MC XL Premium Package milling unit. Scanning of the preparation were performed and crowns were milled using the Vita Mark II blocks. Blocks were cemented using epoxy glue on the pulpal floor only and finger pressure applied for 1 min. Upon completion of the cementation step, misfits between the restoration and abutment were measured by microphotography and the silicone replica technique using light body silicon material on Mesial (M) and Distal (D) surfaces. Results Mean and SDs of marginal gaps in micrometers were: G1/M: 94.90 (±38.52), G1/D: 88.53 (±44.87), G2/M: 85.65 (±29.89), G2/D: 95.28 (±28.13). Two-way ANOVA indicated no significant differences among different groups (P>0.05); surface area (P>0.05) and the interaction (P>0.05). Overall, G2 had greater margin gaps than G1, however, without statistical difference (P>0.05). Conclusions Difference in milling unit generation did not significantly affect the marginal fit. Marginal gap means were in the range of the clinical acceptance levels for both generations of Cerec milling units, regardless the teeth site area. Key words:CAD/CAM, margin, ceramics.

Evaluation of mineral content in healthy permanent human enamel by Raman spectroscopy

Background An understanding of tooth enamel mineral content using a clinically viable method is essential since variations in mineralization may serve as an early precursor of a dental health issues, and may predict progression and architecture of decay in addition to assessing the success and effectiveness of the remineralization strategies. Material and Methods Twenty two human incisor teeth were obtained in compliance with the NIH guidelines and site specifically imaged with Raman microscope. The front portion of the teeth was divided into apical, medium and cervical regions and subsequently imaged with Raman microscope in these three locations. Results Measured mineralization levels have varied substantially depending on the regions. It was also observed that, the cervical enamel is the least mineralization as a populational average. Conclusions Enamel mineralization is affected by a many factors such as are poor oral hygiene, alcohol consumption and high intake of dietary carbohydrates, however the net effect manifests as overall mineral content of the enamel. Thus an early identification of the individual with overall low mineral content of the enamel may be a valuable screening tool in determining a group with much higher than average caries risk, allowing intervention before development of caries. Clinically applicable non-invasive techniques that can quantify mineral content, such as Raman analysis, would help answer whether or not mineralization is associated with caries risk. Key words:Enamel, Raman spectroscopy, mineral content, dental caries.

Evaluation of chemical and morphological changes in radicular dentin after different final surface treatments

The aim of this study was to evaluate the chemical and morphological effects of different lasers as a final surface treatment for endodontic therapy through energy dispersive X‐ray spectroscopy (EDS) and scanning electron microscopy (SEM) respectively. Twenty‐five maxillary canines were selected and instrumented with K3 system. Roots were randomly distributed into five groups (n = 5) according to the surface treatment: GI (distilled water), GII (NaOCl + EDTA), GIII (NaOCl + EDTA + 980 nm diode laser), GIV (NaOCl + EDTA+ 1,064 nm Nd:YAG laser), and GV (NaOCl + EDTA+ 2,780 nm Er, Cr:YSGG laser). Lasers were applied for 20 s and samples were bisected, exposing the treated surface and then subjected to elements quantification by EDS and morphological evaluation by scanning electron microscope (SEM). EDS data were submitted to ANOVA‐two way, and SEM scores were submitted to two‐way Kruskal–Wallis and Dunns tests. The EDS analysis showed no difference for the chemical elements and Ca/P ratio between groups (p > .05). Statistical analysis showed more intense results for GV and less intense results for GI (p < .05). The GIII showed an amorphous organic matrix surface, while GV provided greater removal of intertubular dentin forming craters, and GIV promoted dentin fusion. The EDS method used in this study was not able to verify any chemical changes in root canal dentin; Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser were capable of modifying the dentin morphology, correlating characteristics features for each one, which are essential clinical knowledge to establish the correct indication for each case.

A portable fiber-optic raman spectrometer concept for evaluation of mineral content within enamel tissue

Background Measurement of tooth enamel mineralization using a clinically viable method is essential since variation of mineralization may be used to monitor caries risk or in assessing the effectiveness of remineralization therapy. Fiber optic Raman systems are becoming more affordable and popular in context of biomedical applications. However, the applicability of fiber optic Raman systems for measurement of mineral content within enamel tissue has not been elucidated significantly in the prior literature. Material and Methods Human teeth with varying degrees of enamel mineralization were selected. In addition alligator, boar and buffalo teeth which have increasing amount of mineral content, respectively, were also included as another set of samples. Reference Raman measurements of mineralization were performed using a high-fidelity confocal Raman microscope. Results Analysis of human teeth by research grade Raman system indicated a 2-fold difference in the Raman intensities of v1 symmetric-stretch bands of mineral-related phosphate bonds and 7-fold increase in mineral related Raman intensities of animal teeth. However, fiber optic system failed to resolve the differences in the mineralization of human teeth. Conclusions These results indicate that the sampling volume of fiber optic systems extends to the underlying dentin and that confocal aperture modification is essential to limit the sampling volume to within the enamel. Further research efforts will focus on putting together portable Raman systems integrated with confocal fiber probe. Key words:Enamel, mineral content, raman spectroscopy.

Correlation between micro-hardness and mineral content in healthy human enamel

Background Enamel is the hardest and the stiffest tissue in the human body. The enamel undergoes multidirectional stresses, withstands multimillion chewing cycles, all while protecting the internal dentin and pulp from damage due to mechanical overload and exposure to the harsh chemical environment of the mouth. Raman spectroscopy allows to study enamel mineral content in a non-destructive and site-specific way. While Raman spectroscopy has been applied in other studies to assess tooth mineralization, there are no studies that examine the relationship between micro-hardness and mineral content of the untreated enamel. An understanding of this relationship is extremely important in a clinical context. The effect of various agents on enamel hardness was investigated, though the relationship between healthy enamel mineral content and micro-hardness remains obscure. Material and Methods Twenty human incisor teeth were obtained in compliance with the NIH guidelines and imaged site-specifically with a Raman microscope and evaluated with a Brinell hardness measurement device. The front portion of each tooth was divided into apical, medium and cervical regions and subsequently imaged with a Raman microscope in these three locations. Results and Conclusions The results demonstrated that enamel mineral content varies significantly between individuals and is correlated with the hardness of the enamel. Non-invasive, sample preparation free Raman spectroscopy was successfully employed to measure the mineral content of healthy enamel and it correlated the mineralization score to the hardness measurements of the selected cervical location. The overall level of enamel mineral content may serve as a robust predictor of patients’ susceptibility to developing caries, and overall enamels wear resistance, thus allowing for the prevention of caries via clinically available methods of remineralization, fluoride treatment and frequent cleaning. Key words:Enamel, raman spectroscopy, micro-hardness, extracted teeth.

Effect of polyethelene oxide on the thermal degradation of cellulose biofilm - Low cost material for soft tissue repair in dentistry

Background Bio cellulose is a byproduct of sweet tea fermentation known as kombusha. During the biosynthesis by bacteria cellulose chains are polymerized by enzyme from activated glucose. The single chains are then extruded through the bacterial cell wall. Interestingly, a potential of the Kombucha’s byproduct bio cellulose (BC) as biomaterial had come into focus only in the past few decades. The unique physical and mechanical properties such as high purity, an ultrafine and highly crystalline network structure, a superior mechanical strength, flexibility, pronounced permeability to gases and liquids, and an excellent compatibility with living tissue that reinforced by biodegradability, biocompatibility, large swelling ratios. Material and Methods The bio-cellulose film specimens were provided by the R.P Dressel dental materials laboratory, Department of Comprehensive Care, School of Dental Medicine, Case Western Reserve University, Cleveland, US. The films were harvested, washed with water and dried at room temperature overnight. 1wt% of PEG-2000 and 10wt% of NaOH were added into ultrapure water to prepare PEG/NaOH solution. Then bio-cellulose film was added to the mixture and swell for 3 h at room temperature. All bio-cellulose film specimens were all used in the TA Instruments Q500 Thermogravmetric Analyzer to investigate weight percent lost and degradation. The TGA was under ambient air conditions at a heating rate of 10ºC/min. Results and Conclusions PEG control exhibited one transition with the peak at 380ºC. Cellulose and cellulose/ PEG films showed 3 major transitions. Interestingly, the cellulose/PEG film showed slightly elevated temperatures when compared to the corresponding transitions for cellulose control. The thermal gravimetric analysis (TGA) degradation curves were analyzed. Cellulose control film exhibited two zero order transitions, that indicate the independence of the rate of degradation from the amount on the initial substance. The activation energies for three transitions for cellulose and cellulose/PEG showed increasingly higher values for the transitions at higher temperatures. Key words:TGA, Bio-cellulose, PEG.

Investigation of intra- and inter-individual variations of mineralisation in healthy permanent human enamel by raman spectroscopy

PURPOSE To systematically examine mineralisation of healthy human enamel using Raman spectroscopy and provide an understanding of baseline variations that may be inherent in the healthy enamel from individual to individual as well as variations within a tooth. MATERIALS AND METHODS Human teeth were obtained in compliance with the NIH guidelines. The teeth were collected fresh within the date of the extraction and kept moist at all times with wet tissue paper without any additional disinfecting treatment. The samples were individually wrapped in wet tissue paper and stored in a -20°C freezer. Prior to Raman analysis, the specimens were thawed at room temperature for 30 min. A Raman microscope was employed with a 10X objective used to focus the laser light (785 nm). Raman spectroscopy scores were validated by microcomputed tomography (μCT) on the two teeth which had the highest and lowest mineralisation found in the Raman scans. RESULTS Mineralisation levels varied substantially between individuals. The highest Raman-based mineralisation intensity was about 5-fold greater than the lowest mineralisation score. Incisor mineralisation also varied dramatically depending on different sites on the tooth. CONCLUSIONS Clinically applicable non-invasive techniques such as Raman spectroscopy that can quantify mineral content, such as Raman spectroscopy, may help answer whether or not mineralisation is associated with caries risk.

Mechanical properties and DIC analyses of CAD/CAM materials

Background This study compared two well-known computer-aided-design/computer-aided-manufactured (CAD/CAM) blocks (Paradigm MZ100 [3M ESPE] and Vitablocs Mark II [Vita] in terms of fracture toughness (Kic), index of brittleness (BI) and stress/strain distributions. Material and Methods Three-point bending test was used to calculate the fracture toughness, and the relationship between the Kic and the Vickers hardness was used to calculate the index of brittleness. Additionally, digital image correlation (DIC) was used to analyze the stress/strain distribution on both materials. Results The values for fracture toughness obtained under three-point bending were 1.87Pa√m (±0.69) for Paradigm MZ100 and 1.18Pa√m (±0.17) for Vitablocs Mark II. For the index of brittleness, the values for Paradigm and Vitablocs were 73.13μm-1/2 (±30.72) and 550.22μm-1/2 (±82.46). One-way ANOVA was performed to find differences (α=0.05) and detected deviation between the stress/strain distributions on both materials. Conclusions Both CAD/CAM materials tested presented similar fracture toughness, but, different strain/stress distributions. Both materials may perform similarly when used in CAD/CAM restorations. Key words:Ceramic, CAD/CAM, hybrid materials, composite resin, fracture toughness.