Seda Aydemir

Regenerative Endodontic Treatment of an Infected Immature Dens Invaginatus with the Aid of Cone-Beam Computed Tomography

Dens invaginatus is a developmental anomaly that results in an enamel-lined cavity intruding into the crown or root before the mineralization phase. This report presents regenerative endodontic treatment of a necrotic immature tooth with Oehlers type III dens invaginatus of a nine-year-old female patient. A diagnosis of dens invaginatus (Oehlers type III) and a large periapical lesion was established with the aid of cone-beam computed tomography (CBCT). In the presented case contrary to the classic revascularization protocol, mechanical instrumentation was performed which apparently did not interfere with the regeneration process. After mechanical instrumentation of the invaginated canal by manual K-files, the invaginated canal space was disinfected by triple antibiotic paste followed by blood clot induction from the periapical tissues and the placement of mineral trioxide aggregate. At one-year follow-up, the tooth remained clinically asymptomatic. Radiographic examination revealed complete healing of the periapical lesion. At the 20-month follow-up, the radiographic examination also showed that the open apex was closed and the walls of the root canal were thickened.

Evaluation of dentinal defect formation after root canal preparation with two reciprocating systems and hand instruments: an in vitro study.

The purpose of this study was to evaluate the presence of dentinal defects after root canal preparation with hand instruments and two different reciprocating instruments. Sixty freshly extracted mandibular incisor teeth were selected for this in vitro study. On the basis of root length, mesiodistal and buccolingual dimensions, the teeth were allocated into three identical experimental groups (n = 15) and one control group (n = 15). The teeth in the control group were left unprepared. The other groups were: stainless steel hand instruments, WaveOne® Primary instruments and RECIPROC® R25 instruments. The reciprocating instruments were used with a reciprocating gentle in-and-out motion in a torque-limited electric motor at the appropriate preset mode. Horizontal sections were made 3, 6 and 9 mm from the apex. Samples were stained with methylene blue and viewed through a stereomicroscope. The presence of dentinal defects (fractures, incomplete cracks and craze lines) and their locations were investigated by two endodontists. These data were analysed statistically by Fishers exact and chi-square tests. No defects were observed in the unprepared group. All instruments caused dentinal defects, with no significant differences between the instrument systems. All experimental groups demonstrated significantly more defects at the 3-mm level in comparison with the unprepared group (p = 0.032). At the other levels, there was no significant difference between the experimental groups and the control group. The use of hand or reciprocating instruments could induce the formation of dentinal defects during root canal preparation.

Accuracy of the Dentaport ZX apex locator for working length determination when retreating molar root canals

The aim of this study was to evaluate the accuracy of the Dentaport ZX apex locator for working length determination during root canal retreatment of mandibular molars. Fifteen extracted mandibular first molars with separate mesial canals and apical foraminae and one distal canal were selected. The mesiobuccal and distal canals were investigated; the length with the file tip at the major diameter was defined as the tooth length (TL). The canals were prepared with ProTaper files to 1 mm short of this and filled with gutta-percha and AH Plus sealer. One week later, the root fillings were removed using ProTaper retreatment files. Tooth length was remeasured and recorded as the retreatment tooth length (RTL). Then electronic measurements were taken at the major (electronic apex locator (EAL) major) and minor (EAL minor) foraminae as suggested by the instrument display. These lengths were compared with RTL and measurements 0.5 and 1 mm short of this distance. For both canals, no significant difference was found between RTL and EAL major, and 0.5 mm short of RTL and EAL minor (P > 0.05). There were significant differences found between all other readings. The Dentaport ZX could not detect the minor foramen accurately but was able to indicate the major foramen in molars undergoing a root canal retreatment procedure.

Comparing Fracture Resistance and the Time Required for Two Different Fiber Post Removal Systems.

PURPOSE To compare two fiber post removal techniques in terms of fracture resistance and time required for post removal. MATERIALS AND METHODS Post space was prepared to a 9-mm depth in each root canal. The roots were randomly divided into three groups of 15 specimens each. D.T. Light-Posts were cemented in all groups. In group 1, fiber posts were removed using the D.T. Light-Post-removal kit; in group 2, Start-X stainless-steel ultrasonic tips were used. In group 3, fiber posts were left without removal (the control group). For all groups, fracture resistance (N) value was measured and recorded using a universal testing machine. Times required for fiber post removal were also recorded for the two study groups. RESULTS There was no significant difference between the control and removal kit groups for fracture resistance values (p = 0.233). The fracture resistance value of the ultrasonic group was found to be significantly lower than that of the control group (p = 0.001) as well as that of the removal kit group (p = 0.032). The fiber post removal time for the ultrasonic group was significantly longer than that for the removal kit group (p < 0.001). CONCLUSION Compared to the removal kit, removal of the fiber posts with an ultrasonic tip decreases the fracture resistance of the roots, although significantly more time is required.

Clinical management of a fused mandibular lateral incisor with supernumerary tooth: A case report

The purpose of this report is to present a rare case of a fused mandibular lateral incisor with supernumerary tooth with a follow-up for 18-months. A 35-year-old female patient was referred to our clinic with an extraoral sinus tract in the chin. The intraoral diagnosis revealed the fusion of her mandibular lateral incisors. Vitality pulp tests were negative for mandibular right central and lateral incisors. Radiographic examinations showed a fused tooth with two separate pulp chambers, two distinct roots, and two separate root canals. There were also periapical lesion of fused teeth and mandibular right central incisor, so endodontic treatment was carried out the related teeth. Radiographic examination revealed a complete healing of the lesion postoperatively at the end of 18-months. This paper reports the successful endodontic and restorative treatment of unilateral fused incisors. Because of the abnormal morphology of the crown and the complexity of the root canal system in fused teeth, treatment protocols require special attention.

Comparison of the Sealing Ability of Biodentine, iRoot BP Plus and Mineral Trioxide Aggregate

Objective: The aim of this study was to compare the properties of two new root repair materials, Biodentine and iRoot BP Plus against ProRoot MTA when used as root-end fillings. Methods: The root canals of 45 extracted maxillary anterior teeth were prepared with ProTaper instruments. After apical resection and ultrasonic root-end cavity preparation, the teeth were divided into three groups. The cavities in the first group of 15 were filled with Biodentine, the second with iRoot BP Plus and the third with ProRoot MTA. A computerized fluid filtration method assessed the seal at 2, 10 and 28 days. Results: Significant differences were found between Groups 1-2, Groups 1-3 and between Groups 2-3 at all-time intervals (P 0.05). Conclusion: The two new root repair materials showed good performance and both offered improved handling properties compared to MTA. KEYWORDS endodontics; calcium silicate-based cement; bioceramic root repair material;

Retreatment of a maxillary lateral incisor with two separate root canals confirmed with cone beam computed tomography.

The purpose of this report is to present a rare case of a maxillary lateral incisor exhibiting two separate root canals confirmed by cone-beam computed tomography (CBCT). A 65-year-old female patient with an esthetic complaint regarding her maxillary left lateral incisor was referred to our clinic. During a radiographical examination, an endodontically treated root canal and an extra root canal with an apical lesion were observed. The retreatment was performed. CBCT findings confirmed the root canal mophology of the maxillary left lateral with two distinct canals. We conclude that the CBCT imaging is an adjunctive tool for better assessment of complex root canal systems.

Evaluation of two different root‑end cavity preparation techniques: A scanning electron microscope study

Objective: In this study, we aimed to evaluate and compare the dentinal walls of root-end cavities for the presence of cracks after cavity preparation using US retrotips and Er: YAG laser. Materials and Methods: Fifty single-rooted teeth were prepared by Protaper NiTi rotary system and obturated by lateral condensation. Three milimeters of root-end was resected. Twenty teeth were prepared with US retrotip (Group 1), 20 teeth with Er: YAG laser (Group 2), and 10 teeth without retropreparation (control group). The root-end surfaces were examined under a scanning electron microscope (SEM). Then the cracks of the resected root surfaces were evaluated on microphotographs. Results: No statistically significant difference was detected between US Group and Laser Group for complete, incomplete, intradentinal, and total number of cracks (P = 0.47, P = 0.80, P = 0.69, P = 0.869, respectively). Conclusion: Statistical analysis revealed no significant effect of retropreparation technique on the development of apical cracks (P > 0.05).