Seniz Karacay

Forsus Nitinol Flat Spring and Jasper Jumper Corrections of Class II division 1 Malocclusions

OBJECTIVE To compare the effects of Forsus Nitinol Flat Spring (FNFS) and Jasper Jumper (JJ) in the correction of Class II division I malocclusions. MATERIALS AND METHODS Our research was conducted on 48 adolescents, who had a normal or horizontal growth pattern and retrognathic mandible. The patients were divided into three equal groups randomly. First group was treated with FNFS, and the second group was treated with JJ appliances, whereas the third group was the control group. Lateral cephalograms and study models were obtained after the leveling phase and at time of the removal of the appliances. RESULTS Cephalometric analysis revealed that both the appliances stimulated mandibular growth, increased the anterior face height because of the lower face, and elongated the posterior face height because of the growth of temporomandibular joint. Maxillary central incisors were extruded, retruded, and distally tipped. Contrarily, intrusion, protrusion, and labial tipping were observed in the mandibular central incisors. Distal movement and intrusion of the maxillary first molars and mesial movement and extrusion of the mandibular first molars were the other dental alterations. Overjet and overbite were decreased, and a Class I molar relationship and improvement in the profile were attained in both treatment groups. Cast model analysis showed expansion in the maxillary and mandibular dental arches. CONCLUSIONS Both the appliances were effective in the treatment of Class II malocclusion and revealed nearly same alterations in the skeletal, dental, and soft tissue parameters.

Tumor Necrosis Factor–α Levels during Two Different Canine Distalization Techniques

Abstract Objectives: To compare levels of tumor necrosis factor (TNF)-α while applying continuous and heavy interrupted forces. Materials and Methods: A hybrid retractor was used in the first group. In the second group, rapid canine distalization through periodontal distraction was performed. Gingival crevicular fluid samples were collected from the distal sides of the canine teeth before attaching the appliances and at 1 hour, 24 hours, and 1 week after the force was applied. Results: In the hybrid reactor group, concentration of TNF-α decreased at 1 week according to 24-hour measurements. In the rapid canine distalization group, it severely increased at 1 hour. In the evaluation of between-group differences, significantly higher values were determined in the rapid canine distalization group at 1 hour and 1 week. Conclusions: Heavy interrupted force induces a rapid release of TNF-α, and the tissue response continues for a longer time period. To avoid the harmful effects of heavy interrupted force, there ...

Dynamic MRI evaluation of tongue posture and deglutitive movements in a surgically corrected open bite.

Tongue thrust usually develops in the presence of anterior open bite in order to achieve anterior valve function. In the literature, tongue thrust is described both as the result and the cause of open bite. If it is an adaptation to malocclusion, then tongue posture and deglutitive tongue movements should change after treatment. In this case report, an adult who had skeletal open bite and Class II malocclusion caused by mandibular retrusion was treated surgically. The mandible was advanced in a forward and upward direction with a sagittal split osteotomy. The open bite and Class II malocclusion were corrected and an increase in the posterior airway space (PAS) was observed. Pretreatment and posttreatment dynamic magnetic resonance imaging (MRI) revealed that tongue tip was retruded behind the incisors and contact of the tongue with the palate increased. It was also determined that the anterior and middle portions descended, whereas the posterior portion was elevated at all stages. Advancement of the mandible, correction of open bite, and an increase in PAS affected not only the tongue posture and deglutitive movements, but also the breathing pattern of the patient.

Initial Intrusion of the Molars in the Treatment of Anterior Open Bite Malocclusions in Growing Patients

The treatment of the hyperdivergent phenotype and/or anterior openbite is one of the common problems facing orthodontists. The purpose of this study is to present a new appliance (Molar Intruder) for molar intrusion and to determine its effects in the treatment of anterior openbite. The study group comprised 14 patients (eight girls and six boys), with a mean age of 10 years and 7 months. All presented anterior open bite malocclusions between the second premolars. The study was carried out on lateral head films taken before (T1) and after (T2) molar intrusion. Periapical radiographs, study models, and standard photographs of all the patients were also obtained before and after molar intrusion. The paired sample t-test was used to determine the differences between the parameters. The average treatment time with the Molar Intruder was five months. The mean intrusion of maxillary and mandibular molars was 1.86 mm and 1.04 mm, respectively. Maxillary incisors extruded 0.54 mm with a labial tipping of 1.46 degrees and overbite increased by 4.00 mm. The mandibular plane angle was decreased by 1.57 degrees, and the anterior face height was decreased by 1.86 mm on average. The mandible showed a counterclockwise rotation, the chin moved forward, and the posterior facial height/anterior facial height ratio was increased. Anterior openbites of the patients were significantly rehabilitated at the end of the intrusion period, simplifying further orthodontic treatment.

Use of zygomatic anchors during rapid canine distalization: a preliminary case report.

Rapid canine distalization is a technique involving periodontal ligament distraction. The primary aim of this technique is to distalize the canines without anchorage loss and to shorten the duration of orthodontic treatment. After the rapid canine distalization, the healing process of the periodontal ligament is similar to rapid palatal expansion and requires a consolidation period. The long consolidation period of the technique conflicts with the second aim. Skeletal anchorage systems seem to compensate for this conflict because they can be also used for retraction of incisors during consolidation period. This case report presents the orthodontic treatment of a 16-year-old female, who had a bimaxillary retrusion and a dental Class II division I malocclusion. Upper first premolars were extracted and, while the canines were being distalized rapidly by periodontal ligament distraction, the incisors were retracted using a zygomatic anchorage system. The treatment of the patient was completed in five months without any anchorage loss.

Distraction osteogenesis in a severe mandibular deficiency

ObjectiveDistraction osteogenesis is an alternative treatment method for the correction of mandibular hypoplasia. In this case report, distraction with a multidirectional extraoral device was performed to gradually lengthen the corpus and ramus of a patient who had a severe hypoplastic mandible.Materials and methodsThe patient underwent bilateral extraoral ramus and corpus distraction osteogenesis. After seven days of latency period, distraction was performed 0.5 mm twice a day. Subsequent consolidation period was 12 weeks.ResultsThe patients mandible was elongated successfully. Cephalometric analysis revealed that ANB angle decreased from 13° to 6°, overjet of 15 mm decreased to 4 mm, corpus length increased from 49 mm to 67 mm, and ramus length increased from 41 mm to 43 mm. Posterior airway space (PAS) also increased due to advancement of the mandible. In stereolithographic model evaluation it was determined that the distances from condylion to gonion and from gonion to pogonion increased.ConclusionSatisfactory results from both aesthetic and functional standpoints were obtained by distraction osteogenesis of the ramus and corpus.

Condylar response to functional therapy with Twin-Block as shown by cone-beam computed tomography

OBJECTIVE To evaluate the condylar changes through cone-beam computed tomography (CBCT) images in patients treated with Twin-Block functional appliance. MATERIALS AND METHODS In this retrospective study, CBCT images of 30 patients who were treated with the Twin-Block appliance were used. Mandible was segmented and pretreatment and posttreatment (T0 and T1) condylar volume was compared. The angle between sella-nasion-Point A (SNA), angle between sella-nasion-Point B (SNB), angle between Point A-nasion-Point B (ANB), midfacial length (Co-A), mandibular length (Co-Gn), and the distances from right condylion to left condylion (CoR-CoL) were also measured on three-dimensional images. Differences were analyzed with Wilcoxon signed rank tests, and Mann-Whitney U-tests were used to compare the scores of male and female participants. Significance was set at P < .05. RESULTS In this study, a decrease in SNA and ANB (P < .05 and P < .01, respectively) and an increase in SNB (P < .01) were found. Additionally, CoR-CoL, Co-Gn, and condylar volume increased at both the left and right sides (P < .01). However, increase at Co-A was not statistically significant (P > .05). Comparison of differences by sex was not statistically significant for all measurements (P > .05). CONCLUSION Twin-Block appliance increases condylar volume, mandibular length, and intercondylar distance by stimulating growth of condyle in an upward and backward direction.

Effects of hyperbaric oxygen during experimental tooth movement.

OBJECTIVE To determine the effects of hyperbaric oxygen (HBO) on bone remodeling during orthodontic tooth movement. MATERIALS AND METHODS Twenty-four male, adult Sprague Dawley rats were randomly divided into two groups. HBO was administered in the first group, and the second group served as a control. The mandibular first molars were moved mesially by means of Ni-Ti closed coil springs in all groups. RESULTS Results were evaluated histomorphometrically and the parameters of trabecular bone volume (BV/TV), trabecular bone number (Tr.N), and trabecular separation (Tr.Sep) were evaluated at the interradicular bone area of the mandibular first molars. Increases in BV/TV and Tr.N and decreases in Tr.Sep revealed the osteoblastic activity of HBO. HBO application caused an increase in bone apposition and osteoblastic activity or a decrease in osteoclastic activity. CONCLUSIONS HBO enhanced the bone formation during experimental tooth movement. Therefore, the findings of this study support our hypothesis that osteoblastic activity might be modulated by changes in the environmental oxygen tension.

Evaluation of hyoid bone movements in subjects with open bite: a study with real-time balanced turbo field echo cine-magnetic resonance imaging

Objective To assess the position and movements of the hyoid bone during deglutition in patients with open bite. Methods Thirty-six subjects were divided into 2 groups according to the presence of anterior open bite. The open bite group (OBG) and control group each comprised 18 patients with a mean overbite of -4.9 ± 1.9 mm and 1.9 ± 0.7 mm. The position of the hyoid bone during the 4 stages of deglutition was evaluated by measuring vertical and horizontal movement of the bone. Results Interactions of group and stage showed no significant effect on the measurements (p > 0.05). However, when group and stage were evaluated individually, they showed significant effects on the measurements (p < 0.001). In OBG, the hyoid bone was more inferiorly and posteriorly positioned, and this position continued during the deglutition stages. Conclusions The hyoid bone reaches the maximum anterior position at the oral stage and maximum superior position at the pharyngeal stage during deglutition. Open bite does not change the displacement pattern of the bone during deglutition. The hyoid bone is positioned more inferiorly and posteriorly in patients with open bite because of released tension on the suprahyoid muscles.

Mandibular Distraction with MD-DOS Device

Distraction osteogenesis is an alternative treatment method for the correction of mandibular hypoplasia. In this case report, mandibular distraction with a dynamic osteosynthesis system (MD-DOS) was performed to gradually lengthen the mandible of a patient who had a severe hypoplastic mandible. The patient underwent intraoral bilateral mandibular distraction osteogenesis. The latency period after the operation was seven days. The distraction was performed three times daily for 14 days at the rate of 0.33 mm each time. Subsequent retention was nine weeks. The patients mandible was elongated successfully and a satisfactory profile and occlusion was achieved.