Simon Fleischmann

MXene as a novel intercalation-type pseudocapacitive cathode and anode for capacitive deionization

In this proof-of-concept study, we introduce and demonstrate MXene as a novel type of intercalation electrode for desalination via capacitive deionization (CDI). Traditional CDI cells employ nanoporous carbon electrodes with significant pore volume to achieve a large desalination capacity via ion electrosorption. By contrast, MXene stores charge by ion intercalation between the sheets of its two-dimensional nanolamellar structure. By this virtue, it behaves as an ideal pseudocapacitor, that is, showing capacitive electric response while intercalating both anions and cations. We synthesized Ti3C2-MXene by the conventional process of etching ternary titanium aluminum carbide i.e., the MAX phase (Ti3AlC2) with hydrofluoric acid. The MXene material was cast directly onto the porous separator of the CDI cell without added binder, and exhibited very stable performance over 30 CDI cycles with an average salt adsorption capacity of 13 ± 2 mg g−1.

Faradaic deionization of brackish and sea water via pseudocapacitive cation and anion intercalation into few-layered molybdenum disulfide

This work establishes molybdenum disulfide/carbon nanotube electrodes for the desalination of high molar saline water. Capitalizing on the two-dimensional layered structure of MoS2, both cations and anions can be effectively removed from a feed water stream by faradaic ion intercalation. The approach is based on the setup of capacitive deionization (CDI), where an effluent water stream is desalinated via the formation of an electrical double-layer at two oppositely polarized carbon electrodes. Yet, CDI can only be effectively applied to low concentrated solutions due to the intrinsic limitation of the electrosorption mechanism. By replacing the conventional porous carbon with MoS2/CNT binder-free electrodes, deionization of sodium and chloride ions was achieved by ion intercalation instead of ion electrosorption. This enabled stable desalination performance over 25 cycles in various molar concentrations, with salt adsorption capacities of 10, 13, 18, and 25 mg g−1 in 5, 25, 100, and 500 mM NaCl aqueous solutions, respectively. This novel approach of faradaic deionization (FDI) paves the way towards a more energy-efficient desalination of brackish water and even sea water.

Tuning pseudocapacitive and battery-like lithium intercalation in vanadium dioxide/carbon onion hybrids for asymmetric supercapacitor anodes

The study presents the synthesis of vanadium oxide/carbon onion hybrid materials. Flower-like vanadium oxide nanostructures nucleate on carbon onion nanoparticles under hydrothermal conditions, forming a highly intertwined network. By varying the amount of added carbon onions during the synthesis, the number of possible nucleation sites can be adjusted, resulting in the preferential growth of vanadium dioxide in either P21/c or C2/m space group. When employed as a lithium intercalation electrode, P21/c VO2 exhibits capacitor-like (pseudocapacitive) lithium intercalation, whereas C2/m VO2 shows battery-like intercalation peaks with a maximum capacity of 127 mA h g−1. By selecting an optimum ratio and thereby combining both intercalation mechanisms, enhanced kinetics with discharge capacities of 45 mA h g−1 and 29 mA h g−1 at high rates of 50 A g−1 and 100 A g−1 (equal to 394C and 788C) are obtained. This behavior can be translated to a device level by using the material as anodes in asymmetric supercapacitors with activated carbon cathodes, yielding a maximum specific energy of 45 W h kg−1 and a high power of 58 kW kg−1, while longevity over 5000 charge/discharge cycles is demonstrated.

Vanadium pentoxide/carbide-derived carbon core–shell hybrid particles for high performance electrochemical energy storage

A novel, two step synthesis is presented combining the formation of carbide-derived carbon (CDC) and redox-active vanadium pentoxide (V2O5) in a core–shell manner using solely vanadium carbide (VC) as the precursor. In a first step, the outer part of VC particles is transformed to nanoporous CDC owing to the in situ formation of chlorine gas from NiCl2 at 700 °C. In a second step, the remaining VC core is calcined in synthetic air to obtain V2O5/CDC core–shell particles. Materials characterization by means of electron microscopy, Raman spectroscopy, and X-ray diffraction clearly demonstrates the partial transformation from VC to CDC, as well as the successive oxidation to V2O5/CDC core–shell particles. Electrochemical performance was tested in organic 1 M LiClO4 in acetonitrile using half- and asymmetric full-cell configuration. High specific capacities of 420 mA h g−1 (normalized to V2O5) and 310 mA h g−1 (normalized to V2O5/CDC) were achieved. The unique nanotextured core–shell architecture enables high power retention with ultrafast charging and discharging, achieving more than 100 mA h g−1 at 5 A g−1 (rate of 12C). Asymmetric cell design with CDC on the positive polarization side leads to a high specific energy of up to 80 W h kg−1 with a superior retention of more than 80% over 10 000 cycles and an overall energy efficiency of up to 80% at low rates.

Carbon onion–sulfur hybrid cathodes for lithium–sulfur batteries

In this study, we explore carbon onions (diameter below 10 nm), for the first time, as a substrate material for lithium sulfur cathodes. We introduce several scalable synthesis routes to fabricate carbon onion–sulfur hybrids by adopting in situ and melt diffusion strategies with sulfur fractions up to 68 mass%. The conducting skeleton of agglomerated carbon onions proved to be responsible for keeping active sulfur always in close vicinity to the conducting matrix. Therefore, the hybrids are found to be efficient cathodes for Li–S batteries, yielding 97–98% Coulombic efficiency over 150 cycles with a slow fading of the specific capacity (ca. 660 mA h g−1 after 150 cycles) in long term cycle test and rate capability experiments.

High performance stability of titania decorated carbon for desalination with capacitive deionization in oxygenated water

Performance stability in capacitive deionization (CDI) is particularly challenging in systems with a high amount of dissolved oxygen due to rapid oxidation of the carbon anode and peroxide formation. For example, carbon electrodes show a fast performance decay, leading to just 15% of the initial performance after 50 CDI cycles in oxygenated saline solution (5 mM NaCl). We present a novel strategy to overcome this severe limitation by employing nanocarbon particles hybridized with sol–gel-derived titania. In our proof-of-concept study, we demonstrate very stable performance in low molar saline electrolyte (5 mM NaCl) with saturated oxygen for the carbon/metal oxide hybrid (90% of the initial salt adsorption capacity after 100 cycles). The electrochemical analysis using a rotating disk electrode (RDE) confirms the oxygen reduction reaction (ORR) catalytic effect of FW200/TiO2, preventing local peroxide formation by locally modifying the oxygen reduction reaction.

Niobium carbide nanofibers as a versatile precursor for high power supercapacitor and high energy battery electrodes

This study presents electrospun niobium carbide/carbon (NbC/C) hybrid nanofibers, with an average diameter of 69 ± 30 nm, as a facile precursor to derive either highly nanoporous niobium carbide-derived carbon (NbC–CDC) fibers for supercapacitor applications or niobium pentoxide/carbon (Nb2O5/C) hybrid fibers for battery-like energy storage. In all cases, the electrodes consist of binder-free and free-standing nanofiber mats that can be used without further conductive additives. Chlorine gas treatment conformally transforms NbC nanofiber mats into NbC–CDC fibers with a specific surface area of 1508 m2 g−1. These nanofibers show a maximum specific energy of 19.5 W h kg−1 at low power and 7.6 W h kg−1 at a high specific power of 30 kW kg−1 in an organic electrolyte. CO2 treatment transforms NbC into T-Nb2O5/C hybrid nanofiber mats that provide a maximum capacity of 156 mA h g−1. The presence of graphitic carbon in the hybrid nanofibers enabled high power handling, maintaining 50% of the initial energy storage capacity at a high rate of 10 A g−1 (64 C-rate). When benchmarked for an asymmetric full-cell, a maximum specific energy of 86 W h kg−1 was obtained. The high specific power for both systems, NbC–CDC and T-Nb2O5/C, resulted from the excellent charge propagation in the continuous nanofiber network and the high graphitization of the carbon structure.

Asymmetric tin–vanadium redox electrolyte for hybrid energy storage with nanoporous carbon electrodes

In recent decades, redox-active electrolytes have been applied in stationary energy storage systems, benefitting from Faradaic reactions of the electrolyte instead of the electrode material. One of the challenging tasks is to balance the redox activities between the negative and positive electrode. As a possible solution, a mixed electrolyte with vanadyl and tin sulfate was previously suggested; however, a low power performance is a great challenge to be overcome. Here, we found that the origin of the poor power performance in the mixture electrolyte system (vanadium complex and tin solution) is the reduction of the pore volume at the positive electrode via irreversible tin dioxide formation. To prevent the latter, we introduce a hybrid energy storage system exhibiting both battery-like and supercapacitor-like features via asymmetric redox electrolytes at the microporous activated carbon electrodes; SnF2 solution as anolyte and VOSO4 as catholyte. By employing an anion exchange membrane, the irreversible SnO2 formation at the positive electrode is effectively suppressed; thus, an asymmetric 1 M SnF2|3 M VOSO4 system provides a high maximum specific power (3.8 kW kg−1 or 1.5 kW L−1), while still exhibiting a high maximum specific energy up to 58.4 W h kg−1 (23.4 W h L−1) and a high cycling stability over 6500 cycles.

Nanoconfinement of redox reactions enables rapid zinc iodide energy storage with high efficiency

A key challenge for present-day electric energy storage systems, such as supercapacitors and batteries, is to meet the worlds growing demand for high performances, low cost, and environmental-friendliness. Here, we introduce a hybrid energy storage system combining zinc iodide (ZnI2) as redox electrolyte with a nanoporous activated carbon fiber (ACF) cathode and a zinc disk anode. We found that the nanopores (<1 nm) of ACF lead to a strong adsorption behavior of iodide and triiodide. Hence, this system exhibits low self-discharge rates without applying an ion exchange membrane. The high power performance (20.0 kW kg−1) originates from the enhanced redox kinetics of the iodide system as evidenced by electrochemical analysis. Considering the high specific energy (226 W h kg−1), the ACF/Zn ZnI2 battery represents an alternative for lead acid, Ni–Zn, and Ni–Cd batteries, while providing a supercapacitor-like power performance in the range of seconds to minutes charging times.

Influence of carbon substrate on the electrochemical performance of carbon/manganese oxide hybrids in aqueous and organic electrolytes

Manganese oxide presents very promising electrochemical properties as an electrode material in supercapacitors, but there remain important open questions to guide further development of the complex manganese oxide/carbon/electrolyte system. Our work addresses specifically the influence of carbon ordering and the difference between outer and inner porosity of carbon particles for the application in aqueous 1 M Na2SO4 and 1 M LiClO4 in acetonitrile. Birnessite-type manganese oxide was hydrothermally hybridized on two kinds of carbon onions with only outer surface area and different electrical conductivity, and conventional activated carbon with a high inner porosity. Carbon onions with a high degree of carbon ordering, high conductivity, and high outer surface area were identified as the most promising material, yielding 179 F g−1. Pore blocking in activated carbon yields unfavorable electrochemical performances. The highest specific energy of 16.4 W h kg−1 was measured for a symmetric full-cell arrangement of manganese oxide coated high temperature carbon onions in the organic electrolyte. High stability during 10 000 cycles was achieved for asymmetric full-cells, which proved as a facile way to enhance the electrochemical performance stability.