Soizic Morin

Triclosan persistence through wastewater treatment plants and its potential toxic effects on river biofilms.

Triclosan is a commonly used bactericide that survives several degradation steps in WWTP (wastewater treatment plants) and potentially reaches fluvial ecosystems. In Mediterranean areas, where water scarcity results in low dilution capacity, the potential environmental risk of triclosan is high. A set of experimental channels was used to examine the short-term effects of triclosan (from 0.05 to 500μgL⁻¹) on biofilm algae and bacteria. Environmentally relevant concentrations of triclosan caused an increase of bacterial mortality with a no effect concentration (NEC) of 0.21μgL⁻¹. Dead bacteria accounted for up to 85% of the total bacterial population at the highest concentration tested. The toxicity of triclosan was higher for bacteria than algae. Photosynthetic efficiency was inhibited with increasing triclosan concentrations (NEC=0.42μgL⁻¹), and non-photochemical quenching mechanisms decreased. Diatom cell viability was also affected with increasing concentrations of triclosan. Algal toxicity may be a result of indirect effects on the biofilm toxicity, but the clear and progressive reduction observed in all the algal-related endpoints suggest the existence of direct effects of the bactericide. The toxicity detected on the co-occurring non-target components of the biofilm community, the capacity of triclosan to survive through WWTP processes and the low dilution capacity that characterizes Mediterranean systems extend the relevance of triclosan toxicity beyond bacteria in aquatic habitats.

Dynamics of benthic diatom colonization in a cadmium/zinc-polluted river (Riou-Mort, France)

Periphytic diatom communities were sampled from glass substrates immersed along a gradient of organic and metallic pollution. We investigated the influence of nutrients and a combination of nutrients and metals on biofilms and diatom communities settling on the glass over three weeks. Biofilm was characterized through organic biomass, chlorophyll-a concentrations and metal content; structure of diatom assemblages was assessed by studying densities, mean biovolumes and taxonomic composition. Exposure to organic pollutants re- sulted in an increase of biomass (dry weight, chlorophyll-a concentrations and diatom densities) and diatom com- munity structure was similar to that at an unpolluted site relative to nutrient concentrations. Cyclotella meneghi- niana was dominant and the species Nitzschia palea, Navicula gregaria and Melosira varians were well-repre- sented. Downstream of the metal-contamination source, biofilm biomass, as well as chlorophyll-a concentrations, decreased as cadmium and zinc content got higher (up to 60 µgCd/g dry weight and 1400 µgZn/g dry weight). Concurrently, the size distribution of diatoms, changing from larger to smaller individuals, reflected changes in the taxonomic composition of the assemblages where Eolimna minima was found in high proportions. Statisti- cally significant amounts of abnormal frustules were also enumerated in the metal-polluted environment (p < 0.05).

Experimental toxicity and bioaccumulation of cadmium in freshwater periphytic diatoms in relation with biofilm maturity.

A study was undertaken to examine cadmium accumulation in freshwater biofilm, its effects on biofilm development and on diatom community structure in laboratory experimental conditions. A suspension of a biofilm originated from the Riou-Mort River (South West France) was inoculated into three experimental units containing clean glass substrates under laboratory conditions. Settling and already developed biofilms were exposed to a Cd concentration of 100 microg L(-1). Metal accumulation (total and intracellular metal content) in biofilms, dry weight and ash-free dry mass, diatom cell density and diatom community composition were analyzed. Both total and intracellular Cd accumulated by the biofilm throughout the experiment increased with duration of metal exposure. Biofilms in the course of maturation were showed higher Cd content and less effective development than settled biofilms. However diatom communities in younger biofilms exposed to Cd increased their tolerance to Cd by a highly significant development of Nitzschia palea. In contrast, Cd exposure had different effect in installed biofilm and taxonomic composition. These results indicate that mature biofilm may limit Cd accumulation into its architecture and protect diatom communities from the effects of metals.

Seasonal effects of cadmium accumulation in periphytic diatom communities of freshwater biofilms.

The relationships between diatom species and cadmium (Cd) accumulated in biofilms of the Riou-Mort River (SW, France) were studied in July 2004 and March 2005. Biofilms were sampled from artificial substrates immersed along a metallic pollution gradient during 20 days. Dynamics of diatom communities and cadmium accumulation were followed by collecting samples after 4, 7, 14 and 20 days of biofilm colonization. Cd accumulation in biofilms during experiment was significantly higher in Cd polluted station (Joanis) than in reference station (Firmi) for both seasons. Periphytic diatom composition varied between sites and seasons. At Firmi station, seasonal dynamics of diatom communities were stable with the dominance of Cyclotella meneghiniana and Melosira varians in July and Surirellabrebissonnii and Navicula gregaria in March. At Joanis station, diatom communities mainly responded to high levels of metal by a high proportion of small, adnate species. Positive correlations between Eolimna minima, Nitzschia palea, Encyonema minutum, Surirella angusta, and Gomphonema parvulum and cadmium accumulation were observed, indicating that these species are tolerant to high levels of cadmium. On the other hand, negative correlations of C. meneghiniana, N. gregaria, Navicula lanceolata, M. varians and Nitzschia dissipata with cadmium qualify them as sensitive diatom species. Periphytic diatom composition through the presence of specific species highlight metal tolerant indicator diatom groups which will be meaningful for biomonitoring pollution in natural aquatic systems.

Consistency in Diatom Response to Metal-Contaminated Environments

Diatoms play a key role in the functioning of streams, and their sensitivity to many environmental factors has led to the development of numerous diatom-based indices used in water quality assessment. Although diatom-based monitoring of metal contamination is not currently included in water quality monitoring programs, the effects of metals on diatom communities have been studied in many polluted watersheds as well as in laboratory experiments, underlying their high potential for metal contamination assessment. Here, we review the response of diatoms to metal pollution from individual level (e.g. size, growth form, and morphological abnormalities) to community structure (replacement of sensitive species by tolerant ones). These potential effects are then tested using a large, multi-country database combining diatom and metal information. Metal contamination proved to be a strong driver of the community structure, and enabled for the identification of tolerant species like Cocconeis placentula var. euglypta, Eolimna minima, Fragilaria gracilis, Nitzschia sociabilis, Pinnularia parvulissima, and Surirella angusta. Among the traits tested, diatom cell size and the occurrence of diatom deformities were found to be good indicators of high metal contamination. This work provides a basis for further use of diatoms as indicators of metal pollution.

Combining polar organic chemical integrative samplers (POCIS) with toxicity testing to evaluate pesticide mixture effects on natural phototrophic biofilms

Polar organic chemical integrative samplers (POCIS) are valuable tools in passive sampling methods for monitoring polar organic pesticides in freshwaters. Pesticides extracted from the environment using such methods can be used to toxicity tests. This study evaluated the acute effects of POCIS extracts on natural phototrophic biofilm communities. Our results demonstrate an effect of POCIS pesticide mixtures on chlorophyll a fluorescence, photosynthetic efficiency and community structure. Nevertheless, the range of biofilm responses differs according to origin of the biofilms tested, revealing spatial variations in the sensitivity of natural communities in the studied stream. Combining passive sampler extracts with community-level toxicity tests offers promising perspectives for ecological risk assessment.

Improving Toxicity Assessment of Pesticide Mixtures: The Use of Polar Passive Sampling Devices Extracts in Microalgae Toxicity Tests

Complexity of contaminants exposure needs to be taking in account for an appropriate evaluation of risks related to mixtures of pesticides released in the ecosystems. Toxicity assessment of such mixtures can be made through a variety of toxicity tests reflecting different level of biological complexity. This paper reviews the recent developments of passive sampling techniques for polar compounds, especially Polar Organic Chemical Integrative Samplers (POCIS) and Chemcatcher® and the principal assessment techniques using microalgae in laboratory experiments. The progresses permitted by the coupled use of such passive samplers and ecotoxicology testing as well as their limitations are presented. Case studies combining passive sampling devices (PSD) extracts and toxicity assessment toward microorganisms at different biological scales from single organisms to communities level are presented. These case studies, respectively, aimed (i) at characterizing the “toxic potential” of waters using dose-response curves, and (ii) at performing microcosm experiments with increased environmental realism in the toxicant exposure in term of cocktail composition and concentration. Finally perspectives and limitations of such approaches for future applications in the area of environmental risk assessment are discussed.

Ecological assessment of French Atlantic lakes based on phytoplankton, phytobenthos and macrophytes

Biological elements, including phytoplankton, phytobenthos, macrophytes, benthic invertebrates and fish, are employed by the EU Water Framework Directive (WFD) 2000/60/EC as ecological indicators for the assessment of surface waters. The use of primary producers (phytoplankton, phytobenthos and macrophytes) for water quality assessment has a long history, and several methods have been developed worldwide. In this study, we used these three communities to assess the ecological status of five natural lakes located in the Aquitaine region (southwest France). Several biological indices used in lakes from other European countries or in French rivers were employed and compared among the three communities. Each primary producer provided complementary information about the ecological status of the lakes, including the invasiveness of exotic taxa. Regardless of the producer community used, the response to the environment, as reflected by the indices (adequate for each community), was similar: Lakes Cazaux, Lacanau and Hourtin showed the best ecological status and Parentis and Soustons the worst. Phytoplankton diagnosis reflected and integrated unambiguously the water quality of the lakes, as demonstrated by the strong relationships between the phytoplankton index and the trophic status criteria. This community appeared as the best indicator, especially when macrophytes were absent. The methods applied here represent a potential tool for the assessment of the ecological status in the context of WFD, but they need to be refined. We propose modifications for phytobenthos index initially tailored for running waters for adequate use in lentic ecosystems. Indices for the three primary producers should be modified to incorporate exotic species which may provide information on potential biodiversity losses.

Variations of periphytic diatom sensitivity to the herbicide diuron and relation to species distribution in a contamination gradient: implications for biomonitoring

Diatoms are commonly used as bioindicators of trophic and saprobic pollution in rivers. However, more knowledge is needed concerning their sensitivity to toxicants such as agricultural herbicides. In this study, seven species of periphytic diatoms were isolated from the Morcille River (Beaujolais area, France) which presents a streamward contamination gradient by pesticides and particularly diuron. The sensitivity of these species to diuron was assessed through ecotoxicological tests based on short-term growth inhibition of monospecific cultures. After application of an appropriate toxicological model, EC50 were determined and the species were ranked according to their tolerance. EC50 values ranged from 4.5 to 19 μg L(-1). Finally, the results were related to field periphyton samples from an upstream and a downstream site in order to check if variations in specific relative abundance between sites are consistent with differences in tolerance to diuron. Species distribution between sites was only partially in accordance with toxicological results suggesting that other factors (toxic or trophic) have an important influence on diatom communities in the river. Nevertheless, diatoms showed their potential to indicate water contamination by pesticides and toxic indices could be developed in complement to existing trophic indices.

Achnanthidium minutissimum (Bacillariophyta) valve deformities as indicators of metal enrichment in diverse widely-distributed freshwater habitats

In the presence of different environmental stressors, diatoms can produce frustules presenting different types of deformities. Metals and trace elements are among the most common causes of these teratological forms. Metal enrichment in water bodies can be attributed to the geological setting of the area or to pollution. The widespread benthic diatom Achnanthidium minutissimum (ADMI) is one of the most metal-tolerant species. In the present study, ADMI teratologies were defined from samples taken from eight very diverse, widely-distributed inland-water habitats: streams affected by active and abandoned mining areas, a metal-contaminated stream, a spring in an old chalcopyrite mine, a mineral-water fountain, and a sediment core taken from a lake affected by metal contamination in the past. Deformed frustules of ADMI were characterised mainly by one (sometimes two) more or less bent off ending, conferring to the specimens a cymbelloid outline (cymbelliclinum-like teratology, CLT). Marked teratologies were distinguished from slight deformities. Hydrochemical analyses, including metals and trace elements, were carried out and enrichment factors (EF) relative to average crustal composition were calculated. To improve our knowledge on the potential of different metals and trace elements to trigger the occurrence of ADMI CLT, we carefully selected 15 springs out of 110 (CRENODAT dataset) where both ADMI and above-average metal or metalloid concentrations occurred, and re-analysed these samples. The results from the eight widely-distributed core sites as well as from the 15 selected CRENODAT springs led to the hypothesis that two metals (copper and zinc) and a metalloid (antimony) were the most likely triggers of ADMI CLT formation. From a quantitative point of view, it is worth noting that the lowest concentrations triggering ADMI CLT can be fairly low, particularly in the case of copper contamination. The antimony-rich site was characterised by a marked-teratology variant where both ends of ADMI were bent off.