Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Soojung Oh is active.

Publication


Featured researches published by Soojung Oh.


PLOS ONE | 2012

HDAC6 Inhibitor Blocks Amyloid Beta-Induced Impairment of Mitochondrial Transport in Hippocampal Neurons

Chaeyoung Kim; Heesun Choi; Eun Sun Jung; Wonik Lee; Soojung Oh; Noo Li Jeon; Inhee Mook-Jung

Even though the disruption of axonal transport is an important pathophysiological factor in neurodegenerative diseases including Alzheimers disease (AD), the relationship between disruption of axonal transport and pathogenesis of AD is poorly understood. Considering that α-tubulin acetylation is an important factor in axonal transport and that Aβ impairs mitochondrial axonal transport, we manipulated the level of α-tubulin acetylation in hippocampal neurons with Aβ cultured in a microfluidic system and examined its effect on mitochondrial axonal transport. We found that inhibiting histone deacetylase 6 (HDAC6), which deacetylates α-tubulin, significantly restored the velocity and motility of the mitochondria in both anterograde and retrograde axonal transports, which would be otherwise compromised by Aβ. The inhibition of HDAC6 also recovered the length of the mitochondria that had been shortened by Aβ to a normal level. These results suggest that the inhibition of HDAC6 significantly rescues hippocampal neurons from Aβ-induced impairment of mitochondrial axonal transport as well as mitochondrial length. The results presented in this paper identify HDAC6 as an important regulator of mitochondrial transport as well as elongation and, thus, a potential target whose pharmacological inhibition contributes to improving mitochondrial dynamics in Aβ treated neurons.


Sensors and Actuators B-chemical | 1993

Sensing behaviour of semconducting metal oxides for the detection of organophosphorus compounds

Soojung Oh; Yun Hee Kim; Dongwon Yoo; Sohee Oh; Sunkil Park

Abstract Sensing behaviours of doped SnO 2 and ZnO elements have been investigated for the detection of organophosphorus compounds. Among the elements examined, SnO 2 − or ZnO-based elements doped with basic oxides such as CaO and MgO exhibit a promising sensing property to DMMP (dimethyl methylphosphonate). Reasonable sensitivity can be obtained at concentrations of DMMP down to 44 ppb. The test gas was oxidized upon exposure to the oxides. It has been suggested that the basic oxide additives are effective in aiding dissociative adsorption of DMMP on the oxide surface, thus facilitating the oxidation reaction of the test gas.


Nature Communications | 2014

Reconstituting ring-rafts in bud-mimicking topography of model membranes

Yong Sang Ryu; In Ho Lee; Jeng Hun Suh; Seung Chul Park; Soojung Oh; Luke R. Jordan; Nathan J. Wittenberg; Sang Hyun Oh; Noo Li Jeon; Byoungho Lee; Atul N. Parikh; Sin-Doo Lee

During vesicular trafficking and release of enveloped viruses, the budding and fission processes dynamically remodel the donor cell membrane in a protein- or a lipid-mediated manner. In all cases, in addition to the generation or relief of the curvature stress, the buds recruit specific lipids and proteins from the donor membrane through restricted diffusion for the development of a ring-type raft domain of closed topology. Here, by reconstituting the bud topography in a model membrane, we demonstrate the preferential localization of cholesterol- and sphingomyelin-enriched microdomains in the collar band of the bud-neck interfaced with the donor membrane. The geometrical approach to the recapitulation of the dynamic membrane reorganization, resulting from the local radii of curvatures from nanometre-to-micrometre scales, offers important clues for understanding the active roles of the bud topography in the sorting and migration machinery of key signalling proteins involved in membrane budding.


BJA: British Journal of Anaesthesia | 2012

Analysis of patterns of three-phase bone scintigraphy for patients with complex regional pain syndrome diagnosed using the proposed research criteria (the ‘Budapest Criteria’)

Jee Youn Moon; Sun-Kyung Park; Yong-Chul Kim; Sang-Yeon Lee; Francis Sangun Nahm; Ju-Won Kim; H. Kim; Soojung Oh

BACKGROUND Three-phase bone scintigraphy (TPBS) is an established objective diagnostic method for complex regional pain syndrome (CRPS), but its validity remains controversial. The aims of this study were: (i) to re-evaluate the diagnostic performance of TPBS, and (ii) to suggest new TPBS criteria based on the proposed research criteria for CPRS in Budapest (the 2003 Budapest research criteria). METHODS The medical records of 228 consecutive patients, evaluated using the Budapest research criteria, were retrospectively analysed. Of these, 116 patients were included in the present study, and 69 of 116 were diagnosed to have CRPS based on these criteria. The diagnostic performance of TPBS was assessed by determining its sensitivity, specificity, and positive and negative likelihood ratios, and new criteria for TPBS were identified by pattern analysis using the Budapest research criteria. RESULTS The sensitivity, specificity, positive likelihood ratio, and negative likelihood ratio of TPBS for the diagnosis of CRPS according to the Budapest research criteria were 40.0, 76.5, 1.73, and 0.78, respectively. Furthermore, D-D-D, D-D-S, and D-D-I patterns [i.e. according to decreased (D), symmetrical (S), or increased (I) tracer uptake during Phases I, II, and III] of TPBS were found to be positively predictive for CRPS. CONCLUSIONS The diagnostic value of a positive TPBS for CRPS is low from the view point of the Budapest research criteria. Our findings suggest that a diagnosis of CRPS using the Budapest research criteria should be considered when decreased patterns of TPBS are observed during Phases I and II.


Journal of Laboratory Automation | 2015

Engineering a Blood Vessel Network Module for Body-on-a-Chip Applications

Hyunryul Ryu; Soojung Oh; Hyun Jae Lee; Jin Young Lee; Hae Kwang Lee; Noo Li Jeon

The blood circulatory system links all organs from one to another to support and maintain each organ’s functions consistently. Therefore, blood vessels have been considered as a vital unit. Engineering perfusable functional blood vessels in vitro has been challenging due to difficulties in designing the connection between rigid macroscale tubes and fragile microscale ones. Here, we propose a generalizable method to engineer a “long” perfusable blood vessel network. To form millimeter-scale vessels, fibroblasts were co-cultured with human umbilical vein endothelial cells (HUVECs) in close proximity. In contrast to previous works, in which all cells were permanently placed within the device, we developed a novel method to culture paracrine factor secreting fibroblasts on an O-ring-shaped guide that can be transferred in and out. This approach affords flexibility in co-culture, where the effects of secreted factors can be decoupled. Using this, blood vessels with length up to 2 mm were successfully produced in a reproducible manner (>90%). Because the vessels form a perfusable network within the channel, simple links to inlets and outlets of the device allowed connections to the outside world. The robust and reproducible formation of in vitro engineered vessels can be used as a module to link various organ components as parts of future body-on-a-chip applications.


Proceedings of the National Academy of Sciences of the United States of America | 2017

Protein kinase C and calcineurin cooperatively mediate cell survival under compressive mechanical stress

Ranjan Mishra; Frank van Drogen; Reinhard Dechant; Soojung Oh; Noo Li Jeon; Sung Sik Lee; Matthias Peter

Significance Cells are constantly exposed to a variety of mechanical cues, and respond by activating conserved signaling pathways that modulate their profiliation and intracellular organization. For instance, cells in solid tumors experience sustained compression from the microenvironment, and compressive stress is known to trigger an invasive phenotype in some cancer cells. However, despite its importance for health and disease, the specific mechanosensors and the downstream signaling network mediating these physiological responses remain largely unknown, in part due to the lack of appropriate experimental systems. Here, we develop a microfluidic platform that allows triggering compressive mechanical stress in a reversible and controllable manner, and we identify cell surface receptors that specifically sense compressive mechanical stress and generate synergistic cellular responses. Cells experience compressive stress while growing in limited space or migrating through narrow constrictions. To survive such stress, cells reprogram their intracellular organization to acquire appropriate mechanical properties. However, the mechanosensors and downstream signaling networks mediating these changes remain largely unknown. Here, we have established a microfluidic platform to specifically trigger compressive stress, and to quantitatively monitor single-cell responses of budding yeast in situ. We found that yeast senses compressive stress via the cell surface protein Mid2 and the calcium channel proteins Mid1 and Cch1, which then activate the Pkc1/Mpk1 MAP kinase pathway and calcium signaling, respectively. Genetic analysis revealed that these pathways work in parallel to mediate cell survival. Mid2 contains a short intracellular tail and a serine−threonine-rich extracellular domain with spring-like properties, and both domains are required for mechanosignaling. Mid2-dependent spatial activation of the Pkc1/Mpk1 pathway depolarizes the actin cytoskeleton in budding or shmooing cells, thereby antagonizing polarized growth to protect cells under compressive stress conditions. Together, these results identify a conserved signaling network responding to compressive mechanical stress, which, in higher eukaryotes, may ensure cell survival in confined environments.


ACS Applied Materials & Interfaces | 2017

High-Density Single-Layer Coating of Gold Nanoparticles onto Multiple Substrates by Using an Intrinsically Disordered Protein of α-Synuclein for Nanoapplications

Ghibom Bhak; Junghee Lee; Chang-Hyun Kim; Dong Young Chung; Jin Hyoun Kang; Soojung Oh; Jungsup Lee; Jin Soo Kang; Ji Mun Yoo; Jee Eun Yang; Kun Yil Rhoo; Sunghak Park; Somin Lee; Ki Tae Nam; Noo Li Jeon; Jyongsik Jang; Byung Hee Hong; Yung-Eun Sung; Myung-Han Yoon; Seung R. Paik

Functional graffiti of nanoparticles onto target surface is an important issue in the development of nanodevices. A general strategy has been introduced here to decorate chemically diverse substrates with gold nanoparticles (AuNPs) in the form of a close-packed single layer by using an omni-adhesive protein of α-synuclein (αS) as conjugated with the particles. Since the adsorption was highly sensitive to pH, the amino acid sequence of αS exposed from the conjugates and its conformationally disordered state capable of exhibiting structural plasticity are considered to be responsible for the single-layer coating over diverse surfaces. Merited by the simple solution-based adsorption procedure, the particles have been imprinted to various geometric shapes in 2-D and physically inaccessible surfaces of 3-D objects. The αS-encapsulated AuNPs to form a high-density single-layer coat has been employed in the development of nonvolatile memory, fule-cell, solar-cell, and cell-culture platform, where the outlying αS has played versatile roles such as a dielectric layer for charge retention, a sacrificial layer to expose AuNPs for chemical catalysis, a reaction center for silicification, and biointerface for cell attachment, respectively. Multiple utilizations of the αS-based hybrid NPs, therefore, could offer great versatility to fabricate a variety of NP-integrated advanced materials which would serve as an indispensable component for widespread applications of high-performance nanodevices.


바이오시스템공학 = Journal of biosystems engineering | 2014

Design, Fabrication, and Application of a Microfluidic Device for Investigating Physical Stress-Induced Behavior in Yeast and Microalgae

Soojung Oh; Jangho Kim; Hyun Ryul Ryu; Ki Taek Lim; Jong Hoon Chung; Noo Li Jeon

【Purpose: The development of an efficient in vitro cell culture device to process various cells would represent a major milestone in biological science and engineering. However, the current conventional macro-scale in vitro cell culture platforms are limited in their capacity for detailed analysis and determination of cellular behavior in complex environments. This paper describes a microfluidic-based culture device that allows accurate control of parameters of physical cues such as pressure. Methods: A microfluidic device, as a model microbioreactor, was designed and fabricated to culture Saccharomyces cerevisiae and Chlamydomonas reinhardtii under various conditions of physical pressure stimulus. This device was compatible with live-cell imaging and allowed quantitative analysis of physical cue-induced behavior in yeast and microalgae. Results: A simple microfluidic-based in vitro cell culture device containing a cell culture channel and an air channel was developed to investigate physical pressure stress-induced behavior in yeasts and microalgae. The shapes of Saccharomyces cerevisiae and Chlamydomonas reinhardtii could be controlled under compressive stress. The lipid production by Chlamydomonas reinhardtii was significantly enhanced by compressive stress in the microfluidic device when compared to cells cultured without compressive stress. Conclusions: This microfluidic-based in vitro cell culture device can be used as a tool for quantitative analysis of cellular behavior under complex physical and chemical conditions.】


Lab on a Chip | 2017

“Open-top” microfluidic device for in vitro three-dimensional capillary beds

Soojung Oh; Hyunryul Ryu; Dongha Tahk; Jihoon Ko; Yoojin Chung; Hae Kwang Lee; Tae Ryong Lee; Noo Li Jeon


Lab on a Chip | 2017

Rapid large area fabrication of multiscale through-hole membranes

Dongha Tahk; Sang-Min Paik; Jungeun Lim; Seokyoung Bang; Soojung Oh; Hyunryul Ryu; Noo Li Jeon

Collaboration


Dive into the Soojung Oh's collaboration.

Top Co-Authors

Avatar

Noo Li Jeon

Seoul National University

View shared research outputs
Top Co-Authors

Avatar

Hyunryul Ryu

Seoul National University

View shared research outputs
Top Co-Authors

Avatar

Dongha Tahk

Seoul National University

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Byoungho Lee

Seoul National University

View shared research outputs
Top Co-Authors

Avatar

Byung Hee Hong

Seoul National University

View shared research outputs
Top Co-Authors

Avatar

Chaeyoung Kim

Seoul National University

View shared research outputs
Top Co-Authors

Avatar

Chang-Hyun Kim

Gwangju Institute of Science and Technology

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Dongwon Yoo

Seoul National University

View shared research outputs
Researchain Logo
Decentralizing Knowledge