Sp Srivathsa Bhat

An introduction to InP-based generic integration technology

Photonic integrated circuits (PICs) are considered as the way to make photonic systems or subsystems cheap and ubiquitous. PICs still are several orders of magnitude more expensive than their microelectronic counterparts, which has restricted their application to a few niche markets. Recently, a novel approach in photonic integration is emerging which will reduce the R&D and prototyping costs and the throughput time of PICs by more than an order of magnitude. It will bring the application of PICs that integrate complex and advanced photonic functionality on a single chip within reach for a large number of small and larger companies and initiate a breakthrough in the application of Photonic ICs. The paper explains the concept of generic photonic integration technology using the technology developed by the COBRA research institute of TU Eindhoven as an example, and it describes the current status and prospects of generic InP-based integration technology.

Photonic integration in Indium-Phosphide Membranes on Silicon (IMOS)

A new photonic integration technique is presented, based on the use of an indium phosphide membrane on top of a silicon chip. This can provide electronic chips (CMOS) with an added optical layer (IMOS) for resolving the communication bottleneck. A major advantage of InP is the possibility to integrate passive and active components (SOAs, lasers) in a single membrane. In this paper we describe progress achieved in both the passive and active components. For the passive part of the circuit we succeeded to bring the propagation loss of our circuits close to the values obtained with silicon; we achieved propagation loss as low as 3.3 dB/cm through optimization of the lithography and the introduction of C60 (fullerene) in an electro resist. Further we report the smallest polarisation converter reported for membrane waveguides ( <10 μm) with low-loss (< 1 dB from 1520- 1550 nm), > 95% polarisation conversion efficiency over the whole C-band and tolerant fabrication. We also demonstrate an InP-membrane wavelength demultiplexer with a loss of 2.8 dB, a crosstalk level of better than 18 dB and a uniformity over the 8 channels of better than 1.2 dB. For the integration of active components we are testing a twin guide integration scheme. We present our design based on optical and electrical simulations and the fabrication techniques.

First demonstration of an electrically pumped laser in the InP Membrane on silicon platform

We demonstrate the first electrically pumped laser in the “InP membrane on Si” platform. With pulsed current injection, the lasing occurs at threshold current of 200mA and peak optical power of 135µW in fiber.