Stefan Gramm

Temperature dependent physicochemical properties of poly(N-isopropylacrylamide-co-N-(1-phenylethyl) acrylamide) thin films

The physicochemical properties of thermo-responsive polymer films are dynamically altered upon changes in environmental conditions. We report on the design and detailed characterization of a novel thermo-responsive polymer film with a temperature transition tuned to fit applications related to the control of marine biofouling. A copolymer consisting of poly(N-isopropylacrylamide) (PNIPAAm) and N-(1-phenylethyl) acrylamide (PEAAm) was synthesized and immobilized as a thin film onto Teflon AF surfaces using a low pressure argon plasma treatment. The temperature dependent physicochemical properties of the thermo-responsive film were thoroughly characterized and the impact of sea water on the film properties was investigated. The immobilized thermo-responsive film exhibits a reversible swelling/deswelling with temperature. Atomic force microscopy showed no morphological changes with varying temperature. Streaming current measurements performed above and below the transition temperature of the thermo-responsive hydrogel indicated that the charging of the polymer/aqueous solution interface is mainly determined by the preferential water ion adsorption at the Teflon AF surface. Inverse contact angles measured using captive air bubbles and analysed by axisymmetric drop shape analysis (ADSA) supported the intrinsic properties of the thermo-responsive film, as surface hydrophilicity decreased with increasing temperature. The advancing water contact angle decreased with increasing temperature, which may be explained by the different molecular mobility at different temperatures, allowing or hampering the re-orientation of hydrophobic segments at the solid–liquid and solid–fluid interfaces. These new films will allow investigations on the interaction of microorganisms with environmentally sensitive surfaces.

Human corneal endothelial cell sheets for transplantation: Thermo-responsive cell culture carriers to meet cell-specific requirements

Corneal endothelial diseases lead to severe vision impairment, motivating the transplantation of donor corneae or corneal endothelial lamellae, which is, however, impeded by endothelial cell loss during processing. Therefore, one prioritized aim in corneal tissue engineering is the generation of transplantable human corneal endothelial cell (HCEC) layers. Thermo-responsive cell culture carriers are widely used for non-enzymatic harvest of cell sheets. The current study presents a novel thermo-responsive carrier based on simultaneous electron beam immobilization and cross-linking of poly(vinyl methyl ether) (PVME) on polymeric surfaces, which allows one to adjust layer thickness, stiffness, switching amplitude and functionalization with bioactive molecules to meet cell type specific requirements. The efficacy of this approach for HCEC, which require elaborate cell culture conditions and are strongly adherent to the substratum, is demonstrated. The developed method may pave the way to tissue engineering of corneal endothelium and significantly improve therapeutic options.

Cultivation of an immortalized human corneal endothelial cell population and two distinct clonal subpopulations on thermo-responsive carriers.

BackgroundRecently, it was possible to show that human corneal endothelial cells (HCEC) can be cultured on thermo-responsive polymer substrates, and can be harvested as entire cell sheets without losing viability. We sought to study HCEC sheet cultivation on such cell culture carriers under serum-free conditions as the next consequential step in developing methods for generation of corneal endothelial cell transplants.MethodsAn immortalized heterogenous HCEC population and two immortalized, clonally grown HCEC lines (HCEC-B4G12 and HCEC-H9C1) were cultured on thermo-responsive substrates under serum-supplemented and serum-free culture conditions. Cell sheets were characterized by phase contrast microscopy and by immunofluorescent staining for ZO-1, Na+,K+-ATPase, and vinculin.ResultsAll tested HCEC populations were able to adhere, spread and proliferate on thermo-responsive substrates under serum-supplemented conditions. Under serum-free conditions, pre-coating of the polymer substrates with ECM proteins was necessary to facilitate attachment and spreading of the cells, except in the case of HCEC-B4G12 cells. The heterogenous HCEC population formed closed monolayers, properly localized ZO-1 to lateral cell borders, and had moderate vinculin levels under serum-free, and higher vinculin levels under serum-supplemented culture conditions. HCEC-B4G12 cells formed closed monolayers, showed proper localization of ZO-1 and Na+,K+-ATPase to lateral cell borders, and had high vinculin levels irrespective of culture conditions. In contrast, HCEC-H9C1 cells had lowest vinculin levels under serum-supplemented, and higher vinculin levels under serum-free culture conditions. ZO-1 was detected throughout the cytoplasm under both culture conditions. These loosely adherent cells were only able to form a closed monolayer under serum-supplemented conditions.ConclusionsSerum-free production of HCEC sheets is possible. The extremely adherent clonal HCEC line B4G12 produced higher vinculin levels than the other two tested HCEC populations, and showed strong adherence to the thermo-responsive, polymeric culture substratum irrespective of culture conditions. This cell line closely resembles terminally differentiated HCEC in vivo, and was found to be particularly suitable for further studies on HCEC cell sheet engineering.

Surface Modification of Cell Culture Carriers: Routes to Anhydride Functionalization of Polystyrene

Physico-chemical and topographical cues allow to control the behavior of adherent cells. Towards this goal, commercially available cell culture carriers can be finished with a laterally microstructured biomolecular functionalization. As shown in a previous study [Biomacromolecules 4 (2003) 1072], the anhydride moiety facilitates a simple and versatile way to protein binding. The present work addresses the technical issue of anhydride surface functionalization of polystyrene, the most common material for cell culture ware. Different approaches based on low pressure plasma, electron beam and ultraviolet light techniques (i.e. maleic anhydride plasma reactions; plasma, electron beam and UV immobilization of functional polymer thin films; grafting of functional polymers to plasma activated surfaces) are introduced and briefly illustrated with examples. Results are characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and ellipsometry. The different routes are compared in terms of technical feasibility and achievable surface properties.

Stimuli-responsive polymer layers for advanced cell culture technologies

Abstract A series of graft copolymers consisting of poly(N-isopropylacrylamide) as a thermoresponsive component in the polymer backbone and poly(ethyleneglycol) side chains were immobilized as thin films on various substrates via low-pressure plasma treatment. The surface-immobilized hydrogels exhibit a transition from partially collapsed to completely swollen, which is in the range of 32 – 35 °C and corresponds to the lower critical solution temperature of the soluble polymers. Cell culture and detachment experiments were performed with mouse fibroblasts and human corneal endothelial cells under standard conditions. The hydrogel-coated supports were found to permit adhesion, spreading and proliferation of the cells and allowed for fast and effective temperature-dependent detachment of intact cell sheets of both cell types. Thus, these coatings offer an efficient method for growth and gentle harvesting of functional cellular assemblies for use in tissue engineering strategies.

Tissue Engineering of the Corneal Endothelium: A Review of Carrier Materials

Functional impairment of the human corneal endothelium can lead to corneal blindness. In order to meet the high demand for transplants with an appropriate human corneal endothelial cell density as a prerequisite for corneal function, several tissue engineering techniques have been developed to generate transplantable endothelial cell sheets. These approaches range from the use of natural membranes, biological polymers and biosynthetic material compositions, to completely synthetic materials as matrices for corneal endothelial cell sheet generation. This review gives an overview about currently used materials for the generation of transplantable corneal endothelial cell sheets with a special focus on thermo-responsive polymer coatings.

Thermo-responsive cell culture carriers based on poly(vinyl methyl ether)—the effect of biomolecular ligands to balance cell adhesion and stimulated detachment

Abstract Two established material systems for thermally stimulated detachment of adherent cells were combined in a cross-linked polymer blend to merge favorable properties. Through this approach poly(N-isopropylacrylamide) (PNiPAAm) with its superior switching characteristic was paired with a poly(vinyl methyl ether)-based composition that allows adjusting physico-chemical and biomolecular properties in a wide range. Beyond pure PNiPAAm, the proposed thermo-responsive coating provides thickness, stiffness and swelling behavior, as well as an apposite density of reactive sites for biomolecular functionalization, as effective tuning parameters to meet specific requirements of a particular cell type regarding initial adhesion and ease of detachment. To illustrate the strength of this approach, the novel cell culture carrier was applied to generate transplantable sheets of human corneal endothelial cells (HCEC). Sheets were grown, detached, and transferred onto planar targets. Cell morphology, viability and functionality were analyzed by immunocytochemistry and determination of transepithelial electrical resistance (TEER) before and after sheet detachment and transfer. HCEC layers showed regular morphology with appropriate TEER. Cells were positive for function-associated marker proteins ZO-1, Na+/K+-ATPase, and paxillin, and extracellular matrix proteins fibronectin, laminin and collagen type IV before and after transfer. Sheet detachment and transfer did not impair cell viability. Subsequently, a potential application in ophthalmology was demonstrated by transplantation onto de-endothelialized porcine corneas in vitro. The novel thermo-responsive cell culture carrier facilitates the generation and transfer of functional HCEC sheets. This paves the way to generate tissue engineered human corneal endothelium as an alternative transplant source for endothelial keratoplasty.

Cellular reporter systems for high-throughput screening of interactions between bioactive matrices and human mesenchymal stromal cells.

Mesenchymal stromal cells (MSC) and factors secreted by them are essential components of the hematopoietic stem cell (HSC) niche within the bone marrow microenvironment. It has been shown that the extracellular matrix (ECM) can influence HSC-supportive potential of MSC and is a prerequisite for the proper signaling of morphogens. Therefore, we aimed at the identification of ECM components and candidate morphogens capable of enhancing the expression of HSC-supportive proteins in human MSC, namely, angiopoietin-1 (Ang-1) and stromal cell-derived factor 1 (SDF-1). For this purpose, highly sensitive secreted dual reporter constructs for Ang-1 and SDF-1 were established. These newly designed dual reporter systems enable continuous monitoring of the Ang-1 and SDF-1 promoter activity in an immortalized human MSC line cultured on ECM/morphogen microarrays. Reporter arrays showed that Ang-1 and SDF-1 expression can be induced by different ECM/morphogen combinations. In addition, continuous monitoring of promoter activity allows delineating time-dependent effects of the ECM and morphogens. Thus, we identified that collagen I and vitronectin in combination with Wnt3a favored SDF-1 expression over time, while only transiently inducing the expression of Ang-1. Taken together, the newly developed reporter systems allow for the monitoring of Ang-1 and SDF-1 promoter activity induced by morphogens and the ECM in a combinatorial and high-throughput manner. This technology might therefore be helpful to optimize culture conditions, which favor the activity of MSC as feeder cells for various types of stem and progenitor cells.