Steven A. Jaramillo

An 800-MeV proton radiography facility for dynamic experiments

The capability has been successfully developed at the Los Alamos Nuclear Science Center (LANSCE) to utilize a spatially and temporally prepared 800-MeV proton beam to produce proton radiographs. A series of proton bursts are transmitted through a dynamically varying object and transported, via a unique magnetic lens system, to an image plane. The magnetic lens system permits correcting for the effects of multiple coulomb scattering which would otherwise completely blur the spatially transmitted information at the image plane. The proton radiographs are recorded on either a time integrating film plate or with a recently developed multi-frame electronic imaging camera system. The latter technique permits obtaining a time dependent series of proton radiographs with time intervals (modulo 358 ns) up to many microseconds and variable time intervals between images. One electronically shuttered, intensified, CCD camera is required per image. These cameras can detect single protons interacting with a scintillating fiber optic array in the image plane but also have a dynamic range which permits recording radiographs with better than 5% statistics for observation of detailed density variations in the object. A number of tests have been carried out to characterize the quality of the proton radiography system for absolute mass determination, resolution, and dynamic range. Initial dynamic experiments characterized the temporal and spatial behavior of shock propagation in high explosives with up to six images per experiment. Based on experience with the prototype system, a number of upgrades are being implemented including the anticipated capability for enhanced mass discrimination through differential multiple coulomb scattering radiographs and more images with improved imaging techniques.

The National Ignition Facility Neutron Imaging System

The National Ignition Facility (NIF) is scheduled to begin deuterium-tritium (DT) shots possibly in the next several years. One of the important diagnostics in understanding capsule behavior and to guide changes in Hohlraum illumination, capsule design, and geometry will be neutron imaging of both the primary 14 MeV neutrons and the lower-energy downscattered neutrons in the 6-13 MeV range. The neutron imaging system (NIS) described here, which we are currently building for use on NIF, uses a precisely aligned set of apertures near the target to form the neutron images on a segmented scintillator. The images are recorded on a gated, intensified charge coupled device. Although the aperture set may be as close as 20 cm to the target, the imaging camera system will be located at a distance of 28 m from the target. At 28 m the camera system is outside the NIF building. Because of the distance and shielding, the imager will be able to obtain images with little background noise. The imager will be capable of imaging downscattered neutrons from failed capsules with yields Y(n)>10(14) neutrons. The shielding will also permit the NIS to function at neutron yields >10(18), which is in contrast to most other diagnostics that may not work at high neutron yields. The following describes the current NIF NIS design and compares the predicted performance with the NIF specifications that must be satisfied to generate images that can be interpreted to understand results of a particular shot. The current design, including the aperture, scintillator, camera system, and reconstruction methods, is briefly described. System modeling of the existing Omega NIS and comparison with the Omega data that guided the NIF design based on our Omega results is described. We will show NIS model calculations of the expected NIF images based on component evaluations at Omega. We will also compare the calculated NIF input images with those unfolded from the NIS images generated from our NIS numerical modeling code.

Range-gated imaging experiments using gated intensifiers

A variety of range gated imaging experiments using high- speed gated/shuttered proximity focused microchannel plate image intensifiers (MCPII) are reported. Range gated imaging experiments were conducted in water for detection of submerged mines in controlled turbidity tank test and in sea water for the Naval Coastal Sea Command/U.S. Marine Corps. Field experiments have been conducted consisting of kilometer range imaging of resolution targets and military vehicles in atmosphere at Eglin Air Force Base for the U.S. Air Force, and similar imaging experiments, but in smoke environment, at Redstone Arsenal for the U.S. Army Aviation and Missile Command. Wavelength of the illumination laser was 532 nm with pulse widths ranging from 6 to 12 ns and comparable gate widths. These tests have shown depth resolution in the tens of centimeters range from time phasing reflected LADAR images with MCPII shutter opening.

Nanosecond Image Shuttering Studies at los Alamos National Laboratory

Experimental results comparing gated imaging capabilities of proximity-focused microchannel-plate intensifiers and electrostatically-focused silicon-intensified-target vidicons are presented. A brief summary of previous response data obtained from several standard and modified versions of both image sensors and current efforts on (1) sector gating of segmented photocathodes (2) pre-pulsing of photocathodes with infrared light to increase conductivity and (3) gate pulse injection techniques are discussed. Segmented photocathodes increased gating speed by simultaneous turn-on of individual sectors whereas preliminary analyses indicate no improvements from infrared illumination.

Neutron imaging development for megajoule scale inertial confinement fusion experiments

Neutron imaging of Inertial Confinement Fusion (ICF) targets is useful for understanding the implosion conditions of deuterium and tritium filled targets at Mega-Joule/Tera-Watt scale laser facilities. The primary task for imaging ICF targets at the National Ignition Facility, Lawrence Livermore National Laboratory, Livermore CA, is to determine the asymmetry of the imploded target. The image data, along with other nuclear information, are to be used to provide insight into target drive conditions. The diagnostic goal at the National Ignition Facility is to provide neutron images with 10 μm resolution and peak signal-to-background values greater than 20 for neutron yields of ~ 1015. To achieve this requires signal multiplexing apertures with good resolution. In this paper we present results from imaging system development efforts aimed at achieving these requirements using neutron pinholes. The data were collected using directly driven ICF targets at the Omega Laser, University of Rochester, Rochester, NY., and include images collected from a 3 × 3 array of 15.5 μm pinholes. Combined images have peak signal-to-background values greater than 30 at neutron yields of ~ 1013.

Neutron imaging for inertial confinement fusion experiments

Neutron imaging of Inertial Confinement Fusion (ICF) targets provides a powerful tool for understanding the implosion conditions of deuterium and tritium filled targets at Mega-Joule/Tera-Watt scale laser facilities. The primary purpose of imaging ICF targets at that National Ignition Facility (NIF), sited at Lawrence Livermore National Laboratory, Livermore, California, is to determine the asymmetry of the fuel in an imploded ICF target. The image data are then combined with other nuclear information to gain insight into the laser and radiation conditions used to drive the target. This information is requisite to understanding the physics of Inertial Confinement Fusion targets and provides a failure mode diagnostic used to optimize the conditions of experiments aimed at obtaining ignition. We present an overview of neutron aperture imaging including a discussion of image formation and reconstruction, requirements for the future (NIF) neutron imaging systems, a description of current imaging system capabilities, and ongoing work to affect imaging systems capable of meeting future system requirements.

Radiation Effects on Video Imagers

Radiation sensitivity of several photoconductive, photoemissive, and solid state silicon-based video imagers was measured by analysing stored photocharge induced by irradiation with continuous and pulsed sources of high energy photons and neutrons. Transient effects as fuinctions of absorbed dose, dose rate, fluences, and ionizing particle energy are presented.

Imaging detector systems for soft x-ray and proton radiography

Multi-pulse imaging systems have been developed for recording images from pulsed X-ray and proton radiographic sources. The number of successive images for x-ray radiography is limited to four being generated by 25 ns, pulsed sources in a close positioned geometry. The number of proton images are provided by the number of proton bursts (approximately 60 ns) delivered to the radiographic system. In both cases the radiation to light converter is a thin LSO crystal. The radiographic image formed is relayed by a direct, coherent bundle or lens coupling to a variety of electronic shuttered, cooled CCD cameras. The X-ray system is optimized for detecting bremmstrahlung, reflection geometry generated X-rays with end point energies below 300 keV. This has resulted in less than 200 μm thick LSO converters which are 25 x 25 mm2. The converter is attached to a UV transmitting fiberoptic which in turn is directly coupled to a coherent bundle. The image is relayed to a 25 mm microchannel plate image intensifier attached to a 4 image framing camera. The framing camera image is recorded by a 1600 x 1600 pixel, cooled CCD camera. The current proton radiography imaging system for dynamic experiments is based on a system of seven individual high-resolution CCD cameras, each with its own optical relay and fast shuttering. The image of the radiographed object is formed on a 1.7 mm thick tiles of LSO scintillator. The rapid shuttering for each of the CCDs is accomplished via proximity-focussed planar diodes (PPD), which require application of 300-to-500 ns long, 12 kV pulses to the PPD from a dedicated HV pulser. The diodes are fiber-optically coupled to the front face of the CCD chips. For each time-frame a separate CCD assembly is required. The detection quantum efficiency (DQE) of the system is about 0.4. This is due to the lens coupling inefficiency, the necessary demagnification (typically between 5:1 and 3:1) in the system optics, and the planar-diode photo-cathode quantum efficiency (QE) (of approximately 15%). More recently, we have incorporated a series of 4 or 9 image framing cameras to provide an increased number of images. These have been coupled to cooled CCD cameras as readouts. A detailed description of the x-ray and proton radiographic imaging systems are discussed as well as observed limitations in performance. A number of improvements are also being developed which will be described.

Intensified/shuttered cooled CCD camera for dynamic proton radiography

An intensified/shuttered cooled PC-based CCD camera system was designed and successfully fielded on proton radiography experiments at the Los Alamos National Laboratory ALNSCE facility using 800-MeV protons. The four camera detector system used front-illuminated full-frame CCD arrays fiber optically coupled to either 25-mm diameter planar diode or microchannel plate image intensifiers which provided optical shuttering for time resolved imaging of shock propagation in high explosives. The intensifiers also provided wavelength shifting and optical gain. Typical sequences consisting of four images corresponding to consecutive exposures of about 500 ns duration for 40-ns proton burst images separated by approximately 1 microsecond were taken during the radiography experiments. Camera design goals and measured performance characteristics including resolution, dynamic range, responsivity, system detection quantum efficiency, and signal-to-noise will be discussed.

Stripline Microchannel Plate Image Intensifier Tubes (MCPTS) For Nanosecond Optical Gating Applications

Shuttering characteristics of low impedance stripline geometry microchannel plate image intensifier tubes (MCPTs) with 50% transmissive nickel undercoated S-20 photocathodes are discussed. Iris-free shutter sequences with 50 to 75 micron resolution at optical gate times of 500ps to 2ns were measured for typical samples from two manufacturers. Shutter sequences clearly showing gate pulse propagation velocities for this MCPT design when externally driven by impedance matched circuitry are contrasted with non-directional sequences obtained from unmatched coupling of the gate pulse.