Stuart A. Boden

Tunable reflection minima of nanostructured antireflective surfaces

Broadband antireflection schemes for silicon surfaces based on the moth-eye principle and comprising arrays of subwavelength-scale pillars are applicable to solar cells, photodetectors, and stealth technologies and can exhibit very low reflectances. We show that rigorous coupled wave analysis can be used to accurately model the intricate reflectance behavior of these surfaces and so can be used to explore the effects of variations in pillar height, period, and shape. Low reflectance regions are identified, the extent of which are determined by the shape of the pillars. The wavelengths over which these low reflectance regions operate can be shifted by altering the period of the array. Thus the subtle features of the reflectance spectrum of a moth-eye array can be tailored for optimum performance for the input spectrum of a specific application.

Carbon nanotubes in a photonic metamaterial

Hybridization of single-walled carbon nanotubes with plasmonic metamaterials leads to photonic media with an exceptionally strong ultrafast nonlinearity. This behavior is underpinned by strong coupling of the nanotube excitonic response to the weakly radiating Fano-type resonant plasmonic modes that can be tailored by metamaterial design.

Nonlinear graphene metamaterial

We demonstrate that the broadband nonlinear optical response of graphene can be resonantly enhanced by more than an order of magnitude through hybridization with a plasmonic metamaterial, while retaining an ultrafast nonlinear response time of ~1 ps. Transmission modulation close to ~1% is seen at a pump fluence of ~30 µJ/cm2 at the wavelength of ~1:6 µm. This approach allows to engineer and enhance graphene’s nonlinearity within a broad wavelength range enabling applications in optical switching, mode-locking, and pulse shaping.

Ultrafast nonlinear control of progressively loaded, single plasmonic nanoantennas fabricated using helium ion milling

We demonstrate milling of partial antenna gaps and narrow conducting bridges with nanometer precision using a helium ion beam microscope. Single particle spectroscopy shows large shifts in the plasmonic mode spectrum of the milled antennas, associated with the transition from capacitive to conductive gap loading. A conducting bridge of nanometer height is found sufficient to shift the antenna from the capacitive to the conductive coupling regime, in agreement with circuit theory. Picosecond pump-probe spectroscopy reveals an enhanced nonlinear response for partially milled antennas, reaching an optimum value for an intermediate bridge height. Our results show that manipulation of the antenna load can be used to increase the nonlinear response of plasmonic antennas.

Helium ion microscopy of Lepidoptera scales

In this report, helium ion microscopy (HIM) is used to study the micro and nanostructures responsible for structural color in the wings of two species of Lepidotera from the Papilionidae family: Papilio ulysses (Blue Mountain Butterfly) and Parides sesostris (Emerald-patched Cattleheart). Electronic charging of uncoated scales from the wings of these butterflies, due to the incident ion beam, is successfully neutralized, leading to images displaying a large depth-of-field and a high level of surface detail, which would normally be obscured by traditional coating methods used for scanning electron microscopy (SEM). The images are compared with those from variable pressure SEM, demonstrating the superiority of HIM at high magnifications. In addition, the large depth-of-field capabilities of HIM are exploited through the creation of stereo pairs that allows the exploration of the third dimension. Furthermore, the extraction of quantitative height information which matches well with cross-sectional transmission electron microscopy measurements from the literature is demonstrated.

Polycrystalline silicon optical fibers with atomically smooth surfaces

We investigate the surface roughness of polycrystalline silicon core optical fibers fabricated using a high-pressure chemical deposition technique. By measuring the optical transmission of two fibers with different core sizes, we will show that scattering from the core-cladding interface has a negligible effect on the losses. A Zemetrics ZeScope three-dimensional optical profiler has been used to directly measure the surface of the core material, confirming a roughness of only ~0.1 nm. The ability to fabricate low-loss polysilicon optical fibers with ultrasmooth cores scalable to submicrometer dimensions should establish their use in a range of nonlinear optical applications.

Imaging the bulk nanoscale morphology of organic solar cell blends using helium ion microscopy.

We use helium ion microscopy (HeIM) to image the nanostructure of poly(3-hexylthiophene)/[6,6]-phenyl-C(61)-butric acid methyl ester (P3HT/PCBM) blend thin-films. Specifically, we study a blend thin-film subject to a thermal anneal at 140 °C and use a plasma-etching technique to gain access to the bulk of the blend thin-films. We observe a domain structure within the bulk of the film that is not apparent at the film-surface and tentatively identify a network of slightly elongated PCBM domains having a spatial periodicity of (20 ± 4) nm a length of (12 ± 8) nm.

Solar energy harvesting in the epicuticle of the oriental hornet (Vespa orientalis)

The Oriental hornet worker correlates its digging activity with solar insolation. Solar radiation passes through the epicuticle, which exhibits a grating-like structure, and continues to pass through layers of the exo-endocuticle until it is absorbed by the pigment melanin in the brown-colored cuticle or xanthopterin in the yellow-colored cuticle. The correlation between digging activity and the ability of the cuticle to absorb part of the solar radiation implies that the Oriental hornet may harvest parts of the solar radiation. In this study, we explore this intriguing possibility by analyzing the biophysical properties of the cuticle. We use rigorous coupled wave analysis simulations to show that the cuticle surfaces are structured to reduced reflectance and act as diffraction gratings to trap light and increase the amount absorbed in the cuticle. A dye-sensitized solar cell (DSSC) was constructed in order to show the ability of xanthopterin to serve as a light-harvesting molecule.

Reflectance properties of silicon moth-eyes in response to variations in angle of incidence, polarisation and azimuth orientation

We report a study of the optical properties of silicon moth-eye structures using a custom-made fully automated broadband spectroscopic reflectometry system (goniometer). This measurement system is able to measure specular reflectance as a function of wavelength, polar incidence angle and azimuth orientation angle, from normal to near-parallel polar incidence angle. The system uses a linear polarized broadband super-continuum laser light source. It is shown that a moth-eye structure composed of a regular array of protruding silicon rods, with finite sidewall angle reduces reflectance and sensitivity to incident wavelength in comparison to truly cylindrical rods with perpendicular sidewalls. It is also shown that moth-eye structures have omnidirectional reflectance properties in response to azimuth orientation of the sample. The importance of applying the reflectometer setup to study the optical properties of solar cell antireflective structures is highlighted.

Suppression of backscattered diffraction from sub-wavelength ‘moth-eye’ arrays

The eyes and wings of some species of moth are covered with arrays of nanoscale features that dramatically reduce reflection of light. There have been multiple examples where this approach has been adapted for use in antireflection and antiglare technologies with the fabrication of artificial moth-eye surfaces. In this work, the suppression of iridescence caused by the diffraction of light from such artificial regular moth-eye arrays at high angles of incidence is achieved with the use of a new tiled domain design, inspired by the arrangement of features on natural moth-eye surfaces. This bio-mimetic pillar architecture contains high optical rotational symmetry and can achieve high levels of diffraction order power reduction. For example, a tiled design fabricated in silicon and consisting of domains with 9 different orientations of the traditional hexagonal array exhibited a ~96% reduction in the intensity of the -1 diffraction order. It is suggested natural moth-eye surfaces have evolved a tiled domain structure as it confers efficient antireflection whilst avoiding problems with high angle diffraction. This combination of antireflection and stealth properties increases chances of survival by reducing the risk of the insect being spotted by a predator. Furthermore, the tiled domain design could lead to more effective artificial moth-eye arrays for antiglare and stealth applications.