Suleyman Kutalmis Buyuk

Comparison of pharyngeal airway volume among different vertical skeletal patterns: a cone-beam computed tomography study.

OBJECTIVE To test the null hypothesis that there are no significant differences in pharyngeal airway volumes among adult patients with different vertical skeletal patterns and a clinically normal sagittal skeletal pattern using cone-beam computed tomography (CBCT). MATERIAL AND METHODS The study sample consisted of 100 adult patients (45 men and 55 women; mean age  =  24.0 ± 5.3 years) with a normal sagittal skeletal pattern divided into three groups according to the vertical skeletal patterns: high angle (32 patients: 15 women and 17 men), low angle (34 patients: 14 women and 20 men), and normal angle (34 patients: 16 women and 18 men) groups. Nasopharyngeal, oropharyngeal, and total airway volumes of patients in all vertical groups were calculated. Group differences were analyzed using one-way analysis of variance and post hoc Tukey tests. RESULTS Nasopharyngeal airway volume in the high-angle group (mean  =  6067.9 ± 1693.9 mm(3)) was significantly lower than that of the low- and normal-angle groups (P < .01). Oropharyngeal airway volume was highest in the low-angle group (mean  =  15,957.6 ± 6817.2 mm(3)) and significantly decreased in the control (mean  =  11,826.1 ± 4831.9 mm(3); P  =  .008) and high angle (mean  =  10,869.1 ± 4084.1 mm(3); P  =  .001) groups. Total airway volume was highest in the low-angle group (mean  =  24,261.6 ± 8470.1 mm(3)) and lowest in the high-angle group (mean  =  16,937.0 ± 5027.4 mm(3); P < .001). CONCLUSION The null hypothesis was rejected. Significant differences were found in pharyngeal airway volumes among different skeletal vertical patterns.

Condylar and ramal vertical asymmetry in adolescent patients with cleft lip and palate evaluated with cone-beam computed tomography.

INTRODUCTION The aims of this study were to evaluate condylar and ramal mandibular vertical asymmetry in a patient group affected by unilateral (UCLP) and bilateral (BCLP) cleft lip and palate, and to compare the findings with a well-matched control group with normal occlusion. METHODS The study groups included 20 UCLP patients (12 male, 8 female), 21 BCLP patients (12 male, 9 female), and a control group of 21 subjects with normal occlusion (10 male, 11 female). Measurements of condylar, ramal, and condylar plus ramal heights and asymmetry indexes were examined on cone-beam computed tomography images. One-way analysis of variance was used to determine potential statistical differences among the groups for condylar, ramal, and condylar plus ramal asymmetry index measurements. The post-hoc Tukey HSD test was used to determine individual differences. RESULTS No investigated group showed a statistically significant sex difference for any asymmetry index (P >0.05). There was a statistically significant difference between the normal and cleft sides in the ramal height and ramal plus condylar height measurements in the UCLP group (P = 0.004 and P = 0.006, respectively). The Tukey HSD test showed a statistically significant difference between the UCLP and BCLP groups in terms of ramal asymmetry index values (P = 0.018). CONCLUSIONS The ramal height and ramal plus condylar height measurements were significantly lower in the cleft side in the UCLP patients, and there was a statistically significant difference in ramal asymmetry index values between the patients affected by UCLP and BCLP.

Assessment of pharyngeal airway volume in adolescent patients affected by bilateral cleft lip and palate using cone beam computed tomography

OBJECTIVE To test the null hypothesis that there were no significant differences for pharyngeal airway volumes between the adolescent patients affected by bilateral cleft lip and palate (BCLP) and well-matched controls using cone beam computed tomography. MATERIALS AND METHODS The study sample consisted of 16 patients (11 female and 5 male; mean [SD] age 14.1 [2.1] years) affected by BCLP and 16 patients (10 female and 6 male; mean [SD] age 13.4 [2.0] years) as age- and sex-matched control group. Craniofacial measurements and pharyngeal airway dimension, area, and volume measurements of patients in both groups were calculated and statistically examined using Students t-test and multiple linear regression analyses. RESULTS Statistically significant differences were found between the BCLP and control groups for SNB (P < .05), SN-GoGn (P < .05), Co-A (P < .05), PAS (P < .01), minAx (P < .01), and oropharyngeal airway volume (P < .05). The most predictive variables for oropharyngeal airway volume were found as PAS (r  =  .655 and P  =  .000) and minAx (r  =  .787 and P  =  .000). CONCLUSIONS The null hypothesis was rejected. Oropharyngeal (P < .05) and total (P > .05) airway volumes were found to be less in the BCLP group, and thus the treatment choice in these patients should have positive effects on the pharyngeal airway.

Alveolar bone thickness and lower incisor position in skeletal Class I and Class II malocclusions assessed with cone-beam computed tomography

Objective To evaluate lower incisor position and bony support between patients with Class II average- and high-angle malocclusions and compare with the patients presenting Class I malocclusions. Methods CBCT records of 79 patients were divided into 2 groups according to sagittal jaw relationships: Class I and II. Each group was further divided into average- and high-angle subgroups. Six angular and 6 linear measurements were performed. Independent samples t-test, Kruskal-Wallis, and Dunn post-hoc tests were performed for statistical comparisons. Results Labial alveolar bone thickness was significantly higher in Class I group compared to Class II group (p = 0.003). Lingual alveolar bone angle (p = 0.004), lower incisor protrusion (p = 0.007) and proclination (p = 0.046) were greatest in Class II average-angle patients. Spongious bone was thinner (p = 0.016) and root apex was closer to the labial cortex in high-angle subgroups when compared to the Class II average-angle subgroup (p = 0.004). Conclusions Mandibular anterior bony support and lower incisor position were different between average- and high-angle Class II patients. Clinicians should be aware that the range of lower incisor movement in high-angle Class II patients is limited compared to average- angle Class II patients.

Treatment effects of skeletally anchored Forsus FRD EZ and Herbst appliances: A retrospective clinical study.

OBJECTIVE To evaluate the skeletal, dentoalveolar, and soft tissue effects of the Forsus FRD appliance with miniplate anchorage inserted in the mandibular symphyses and to compare the findings with a well-matched control group treated with a Herbst appliance for the correction of a skeletal Class II malocclusion due to mandibular retrusion. MATERIALS AND METHODS The sample consisted of 32 Class II subjects divided into two groups. Group I consisted of 16 patients (10 females and 6 males; mean age, 13.20 ± 1.33 years) treated using the Forsus FRD EZ appliance with miniplate anchorage inserted in the mandibular symphyses. Group II consisted of 16 patients (9 females and 7 males; mean age, 13.56 ± 1.27 years) treated using the Herbst appliance. Seventeen linear and 10 angular measurements were performed to evaluate and compare the skeletal, dentoalveolar, and soft tissue effects of the appliances using paired and Students t-tests. RESULTS Both appliances were effective in correcting skeletal class II malocclusion and showed similar skeletal and soft tissue changes. The maxillary incisor was statistically significantly more retruded in the skeletally anchored Forsus FRD group (P < .01). The mandibular incisor was retruded in the skeletally anchored Forsus FRD group (-4.09° ± 5.12°), while it was protruded in the Herbst group (7.50° ± 3.98°) (P < .001). CONCLUSION Although both appliances were successful in correcting the skeletal Class II malocclusion, the skeletally anchored Forsus FRD EZ appliance did so without protruding the mandibular incisors.

Assessment of the alveolar bone support of patients with unilateral cleft lip and palate: A cone-beam computed tomography study

OBJECTIVE To assess the bone support of the teeth adjacent to a cleft using cone-beam computed tomography (CBCT). MATERIALS AND METHODS The CBCT scans of 31 patients with unilateral cleft lip and palate (UCLP) were assessed. The data for teeth neighboring the cleft were compared with those of contralateral noncleft teeth. For each tooth analyzed, the distance between the cementoenamel junction (CEJ) and the bone crest (AC) at the buccal side was measured as was the thickness of the buccal bone level at 0, 1, 2, and 4 mm. RESULTS The bone thicknesses of the central teeth at the cleft region at the crest and 2 mm apically were statistically significantly thinner than that of the central incisor at a noncleft region. The CEJ-AC distance for central teeth at the cleft region was higher than that for central teeth in a noncleft region. CONCLUSIONS Subjects with UCLP showed reduced bone support at teeth neighboring the cleft compared with controls. This may cause some problems during orthodontic treatment.

Effects of early unilateral mandibular first molar extraction on condylar and ramal vertical asymmetry

Objective: The objective of the following study is to investigate the mandibular vertical asymmetry in a group of patients with early unilateral mandibular first molar extractions. Materials and Methods: Mandibular asymmetry index measurements (condylar, ramal and condylar-plus-ramal) were performed on the panoramic radiographs of a study group including 51 patients (mean age: 18.60 ± 1.11 years) and a control group of 51 patients (mean age: 18.53 ± 1.29 years). Group I included patients with a unilateral mandibular first molar extracted before the age of 12 years. Group II included patients with no extractions and had excellent Class I relationships, no missing teeth and slight or moderate anterior crowding. A paired t-test was used to determine possible statistically significant differences between the sides for the measurements. Student′s t-test was used for the comparison of asymmetry index values between the groups and genders. Results: No group showed statistically significant sex-or side-specific differences for posterior vertical height measurements. Condylar asymmetry index and ramal asymmetry index measurements were not statistically different between the groups, while condylar-plus-ramal asymmetry index (CRAI) measurements were statistically different between the groups (P = 0.019). Conclusions: A slight difference for CRAI value was found in patients with early unilateral mandibular first molar extractions.

Evaluation of dehiscence and fenestration in adolescent patients affected by unilateral cleft lip and palate: A retrospective cone beam computed tomography study

OBJECTIVE To evaluate the presence of dehiscence and fenestration defects around anterior teeth in the cleft region and to compare these findings with the noncleft side in the same patients using cone beam computed tomography (CBCT). MATERIALS AND METHODS CBCT scans of 44 patients (26 males, 18 females; mean age, 14.04 ± 3.81 years) with unilateral cleft lip and palate (UCLP) were assessed to define dehiscences and fenestrations of the anterior teeth in both cleft and noncleft sides of the UCLP patients and a control group of noncleft patients (51 patients; 21 males, 30 females; mean age, 14.52 ± 1.16 years). Data were analyzed using Pearsons χ(2) and Students t-test. RESULTS The prevalence of dehiscences at the maxillary central incisors, lateral incisors, and canines teeth were 43.2%, 70.6%, and 34.1% on the cleft side and 22.7%, 53.1%, and 27.3% on the noncleft side of UCLP patients, and 13.7%, 7.8%, and 13.7% in controls, respectively (statistically no difference between the sides of cleft patients). The cleft patients had a statistically significantly higher prevalence of dehiscences than did the controls on both the cleft and noncleft sides (P < .05), except for the maxillary central incisors. Fenestrations for these teeth were significantly more common on the cleft side in UCLP patients compared with controls (P < .05), whereas the difference for maxillary lateral incisors was not statistically significant. CONCLUSIONS Patients with UCLP showed a higher prevalence of dehiscence and fenestration defects around the maxillary anterior teeth.

Dental computed tomographic imaging as age estimation: morphological analysis of the third molar of a group of Turkish population.

AbstractComputed tomography (CT) is capable of providing accurate and measurable 3-dimensional images of the third molar. The aims of this study were to analyze the development of the mandibular third molar and its relation to chronological age and to create new reference data for a group of Turkish participants aged 9 to 25 years on the basis of cone-beam CT images. All data were obtained from the patients’ records including medical, social, and dental anamnesis and cone-beam CT images of 752 patients. Linear regression analysis was performed to obtain regression formulas for dental age calculation with chronological age and to determine the coefficient of determination (r2) for each sex. Statistical analysis showed a strong correlation between age and third-molar development for the males (r2 = 0.80) and the females (r2 = 0.78). Computed tomographic images are clinically useful for accurate and reliable estimation of dental ages of children and youth.

Assessment of the Facial Soft Tissue Thickness of the Patients Affected by Unilateral Cleft Lip and Palate Using Cone Beam Computed Tomography.

Aim:The aim of the study was to evaluate the soft tissue thickness of the patients affected by unilateral cleft lip and palate (UCLP) and to compare the findings with a matched control group without cleft using cone beam computed tomography (CBCT). Methods:The study sample consisted of 66 patients (31 women and 35 men) divided into 2 groups as UCLP group (34 patients; 23 men and 11 women; 9 right sided and 25 left sided; mean age: 14.11 ± 3.48 years) and control group (32 patients; 12 men and 20 women; mean age: 15.10 ± 3.13 years) without any cleft. Angular angle between Nasion-A line and Nasion-B line (ANB), angle between Sella-Nasion line and Gonion-Menton line (SN-MP) and linear (glabella, nasion, rhinion, subnasale, labrale superius, stomion, labrale inferius, labiomentale, pogonion, and gnathion) measurements were done using CBCT. Student t test was performed to compare the variables between the groups. Results:Soft tissue thickness values for men were higher in both groups, except for rhinion and glabella. Subnasale for women (P = 0.000), men (P = 0.006), and total samples (P = 0.000) and the variable of the labrale superius for men (P = 0.047) and total samples (P = 0.040) were found to be statistically significantly thinner in the UCLP group. SN-MP had significant affect on subnasale thickness (R2 = 15.8; Beta = −0.397; P = 0.001). Conclusion:Thickness of the subnasale and the labrale superius were found to be statistically significantly thinner in the UCLP group compared with the controls.