Susan L. Ishaug

Bone formation by three-dimensional stromal osteoblast culture in biodegradable polymer scaffolds

Bone formation was investigated in vitro by culturing stromal osteoblasts in three-dimensional (3-D), biodegradable poly(DL-lactic-co-glycolic acid) foams. Three polymer foam pore sizes, ranging from 150-300, 300-500, and 500-710 microns, and two different cell seeding densities, 6.83 x 10(5) cells/cm2 and 22.1 x 10(5) cells/cm2, were examined over a 56-day culture period. The polymer foams supported the proliferation of seeded osteoblasts as well as their differentiated function, as demonstrated by high alkaline phosphatase activity and deposition of a mineralized matrix by the cells. Cell number, alkaline phosphatase activity, and mineral deposition increased significantly over time for all the polymer foams. Osteoblast foam constructs created by seeding 6.83 x 10(5) cells/cm2 on foams with 300-500 microns pores resulted in a cell density of 4.63 x 10(5) cells/cm2 after 1 day in culture; they had alkaline phosphatase activities of 4.28 x 10(-7) and 2.91 x 10(-6) mumol/cell/min on Days 7 and 28, respectively; and they had a cell density that increased to 18.7 x 10(5) cells/cm2 by Day 56. For the same constructs, the mineralized matrix reached a maximum penetration depth of 240 microns from the top surface of the foam and a value of 0.083 mm for mineralized tissue volume per unit of cross sectional area. Seeding density was an important parameter for the constructs, but pore size over the range tested did not affect cell proliferation or function. This study suggests the feasibility of using poly(alpha-hydroxy ester) foams as scaffolding materials for the transplantation of autogenous osteoblasts to regenerate bone tissue.

Retinal pigment epithelium cells cultured on synthetic biodegradable polymers

Alterations in the normal structure or functions of retinal pigment epithelium (RPE) can result in a number of ocular diseases. Implantation of RPE cells cultured on thin, biodegradable polymer films may provide a means of transplanting an organized sheet of RPE cells with distinct apical/basal characteristics for the restoration of normal RPE function. We have investigated the interactions of human RPE cells with different biodegradable polymer films to assess their suitability as substrates for RPE culture. Four biodegradable polymers were used: low molecular weight (MW) 50:50 poly(DL-lactic-co-glycolic acid) (PLGA); high MW 50:50 PLGA; 75:25 PLGA; and poly(L-lactic acid) (PLLA). Polymer film substrates were manufactured using a solvent casting technique. Human fetal RPE cells (10-16 weeks gestational) were plated on the polymer substrates and the cultures assessed with respect to cell attachment and proliferation. Histological and immunohistochemical studies were performed on the cells after 8 days in culture. RPE cells attached to all the polymers studied after 8 h in culture. After 8 h, 80.2 +/- 9.5% and 82.3 +/- 7.9% of the plated cells were attached to substrates of high MW 50:50 PLGA and 75:25 PLGA, respectively. The cells proliferated on all substrates, and there was about a threefold increase in cell number over the 8-day culture period on all the polymers studied. Immunohistochemistry after 8 days in culture demonstrated RPE cells labeled with a distinct reaction product for cytokeratin in the cell cytoplasm. All the polymers studied were suitable for RPE culture; however, high MW 50:50 PLGA and 75:25 PLGA proved to be the best in terms of manufacturing properties, cell attachment, and proliferation. These polymers can provide a suitable substrate for RPE cell culture and hold promise for the subretinal implantation of organized sheets of RPE cells.

Manufacture and characterization of poly(α-hydroxy ester) thin films as temporary substrates for retinal pigment epithelium cells

Abstract For many disorders of the retinal pigment epithelium (RPE) for which there are no effective treatments, transplantation of RPE cells may provide a viable means of restoring function. Using a solvent casting technique, we have manufactured thin films of poly( l -lactic acid) and poly( dl -lactic-co-glycolic acid) 75:25 and 50:50. Non-porous, flexible films with controlled thickness as thin as 12 ± 3 μm and reproducible surface morphologies and flexural properties were produced. Fetal human RPE cells were found to attach to these substrates when cultured in vitro . The films made using this technique may provide a means of transplanting allogeneic RPE cells as a therapy for a number of ocular diseases related to RPE dysfunction.

Osteoblast migration on poly(α‐hydroxy esters)

We investigated the migration of rat calvaria osteoblast populations on poly(α‐hydroxy ester) films for up to 14 days to determine effects of substrate composition and culture conditions on the migratory characteristics of osteoblasts. Initial osteoblast culture conditions included cell colonies formed by seeding a high (84,000 cells/cm2) or low (42,000 cells/cm2) density of isolated osteoblasts on the polymer films, and bone tissue cultures formed by plating bone chips directly on the substrates. High density osteoblast colonies cultured and allowed to migrate and proliferate radially on 85:15 poly(DL‐lactic‐co‐glycolic acid) (PLGA) films, 75:25 PLGA films, and tissue culture polystyrene controls demonstrated that the copolymer ratio in the polymer films did not affect the rate of increase in substrate surface area (or culture area) covered by the growing cell colony. However, the rate of increase in culture area was dependent on the initial osteoblast seeding density. Initial cell colonies formed with a lower osteoblast seeding density on 75:25 PLGA resulted in a lower rate of increase in culture area, specifically 4.9 ± 0.3 mm2/day, versus 14.1 ± 0.7 mm2/day for colonies seeded with a higher density of cells on the same polymer films. The proliferation rate for osteoblasts in the high and low density seeded osteoblast colonies did not differ, whereas the proliferation rate for the osteoblasts arising from the bone chips was lower than either of these isolated cell colonies. Confocal and light microscopy revealed that the osteoblast migration occurred as a monolayer of individual osteoblasts and not a calcified tissue front. These results demonstrated that cell seeding conditions strongly affect the rates of osteoblast migration and proliferation on biodegradable poly(α‐hydroxy esters).