Tak W. Kee

The thioflavin T fluorescence assay for amyloid fibril detection can be biased by the presence of exogenous compounds

Thioflavin T (ThT) dye fluorescence is used regularly to quantify the formation and inhibition of amyloid fibrils in the presence of anti‐amyloidogenic compounds such as polyphenols. However, in this study, it was shown, using three polyphenolics (curcumin, quercetin and resveratrol), that ThT fluorescence should be used with caution in the presence of such exogenous compounds. The strong absorptive and fluorescent properties of quercetin and curcumin were found to significantly bias the ThT fluorescence readings in both in situ real‐time ThT assays and single time‐point dilution ThT‐type assays. The presence of curcumin at concentrations as low as 0.01 and 1 μm was sufficient to interfere with the ThT fluorescence associated with fibrillar amyloid‐β(1‐42) (0.5 μm) and fibrillar reduced and carboxymethylated κ‐casein (50 μm), respectively. The ThT fluorescence associated with fibrillar amyloid‐β(1‐42) was also biased using higher concentrations of resveratrol, a polyphenol that is not spectroscopically active at the wavelengths of ThT fluorescence, implying that there can be direct interactions between ThT and the exogenous compound and/or competitive binding with ThT for the fibrils. Thus, in all cases where ThT is used in the presence of an exogenous compound, biases for amyloid‐associated ThT fluorescence should be tested, regardless of whether the additive is spectroscopically active. Simple methods to conduct these tests were described. The Congo red spectral shift assay is demonstrated as a more viable spectrophotometric alternative to ThT, but allied methods, such as transmission electron microscopy, should also be used to assess fibril formation independently of dye‐based assays.

Simple approach to one-laser, broadband coherent anti-Stokes Raman scattering microscopy

Coherent anti-Stokes Raman scattering (CARS) microscopy is emerging as a powerful method for imaging materials and biological systems, partly because of its noninvasiveness and selective chemical sensitivity. However, its full potential for species-selective imaging is limited by a restricted spectral bandwidth. Recent increases in bandwidth are promising but still are not sufficient for the level of robust component discrimination that would be needed in a chemically complex milieu found, for example, in intracellular and extracellular environments. We demonstrate a truly broadband CARS imaging instrument that we use to acquire hyperspectral images with vibrational spectra over a bandwidth of 2500 cm(-1) with a resolution of 13 cm(-1).

Encapsulation of curcumin in cationic micelles suppresses alkaline hydrolysis

The alkaline hydrolysis of curcumin was studied in three types of micelles composed of the cationic surfactants cetyl trimethylammonium bromide (CTAB) and dodecyl trimethylammonium bromide (DTAB) and the anionic surfactant sodium dodecyl sulfate (SDS). At pH 13, curcumin undergoes rapid degradation by alkaline hydrolysis in the SDS micellar solution. In contrast, alkaline hydrolysis of curcumin is greatly suppressed in the presence of either CTAB or DTAB micelles, with a yield of suppression close to 90%. The results from fluorescence spectroscopic studies reveal that while curcumin remains encapsulated in CTAB and DTAB micelles at pH 13, curcumin is dissociated from the SDS micelles to the aqueous phase at this pH. The absence of encapsulation and stabilization in the SDS micellar solution results in rapid hydrolysis of curcumin.

Effective Stabilization of Curcumin by Association to Plasma Proteins: Human Serum Albumin and Fibrinogen

The use of curcumin as an effective wound healing agent is of significant interest currently. It is well established that curcumin undergoes rapid degradation in physiological buffer by hydrolysis. The means by which curcumin is stabilized at the wound site to enable healing is poorly understood because blood plasma is composed of approximately 92% water. Plasma proteins, which constitute the remaining 6-8%, has been shown to stabilize curcumin. It is, however, still unclear which proteins are responsible for this phenomenon. In this study, the effects of major plasma proteins, which include human serum albumin (HSA), fibrinogen, immunoglobulin G (IgG), and transferrin, on stabilizing curcumin are investigated. In particular, we investigate their effects on the hydrolysis of curcumin at pH 7.4. In the presence of both transferrin and IgG, curcumin continues to undergo rapid hydrolysis but this reaction is suppressed by the presence of either HSA or fibrinogen with an impressive yield of approximately 95%. Furthermore, the binding constants of curcumin to HSA and fibrinogen are on the order of 10(4) and 10(5) M(-1), respectively. The binding constants of transferrin and IgG, however, are at least 1 order of magnitude less than those of HSA and fibrinogen. The results support that strong binding occurs at the hydrophobic moieties of HSA and fibrinogen, excluding water access. Therefore, strong interactions with HSA and fibrinogen inhibit hydrolysis of curcumin and in turn lead to effective suppression of degradation.

The role of charge in the surfactant-assisted stabilization of the natural product curcumin.

Colloidal solutions of surfactants that form micelles or vesicles are useful for solubilizing and stabilizing hydrophobic molecules that are otherwise sparingly soluble in aqueous solutions. In this paper we investigate the use of micelles and vesicles prepared from ionic surfactants for solubilizing and stabilizing curcumin, a medicinal natural product that undergoes alkaline hydrolysis in water. We identify spectroscopic signatures to evaluate curcumin partitioning and deprotonation in surfactant mixtures containing micelles or vesicles. These spectroscopic signatures allow us to monitor the interaction of curcumin with charged surfactants over a wide range of pH values. Titration data are presented to show the pH dependence of curcumin interactions with negatively and positively charged micelles and vesicles. In solutions of cationic micelles or positively charged vesicles, strong interaction between the Cur(-1) phenoxide ion and the positively charged surfactants results in a change in the acidity of the phenolic hydrogen and a lowering of the apparent lowest pK(a) value for curcumin. In the microenvironments formed by anionic micelles or negatively charged bilayers, our data indicates that curcumin partitions as the Cur(0) species, which is stabilized by interactions with the respective surfactant aggregates, and this leads to an increase in the apparent pK(a) values. Our results may explain some of the discrepancies within the literature with respect to reported pK(a) values and the acidity of the enolic versus phenolic protons. Hydrolysis rates, quantum yields, and molar absorption coefficients are reported for curcumin in a variety of solutions.

Coarse-grained simulations of the solution-phase self-assembly of poly(3-hexylthiophene) nanostructures.

Under certain conditions the conjugated polymer poly(3-hexylthiophene) (P3HT) self-assembles into high-aspect-ratio nanostructures (known as nanofibres, nanowires, or nanoribbons) when cooled below its solubility limit in a marginal solvent such as anisole. Such nanostructures are potentially beneficial for organic photovoltaic device performance. In this work, Langevin dynamics simulations of a coarse-grained model of P3HT in implicit anisole solvent are used to study the self-assembly of P3HT nanostructures for polymer chain lengths and concentrations used experimentally to prepare P3HT nanofibres. The coarse-grained model is parametrised to match the local structure and dynamics of an atomistic model with explicit solvent. Nanofibres are also prepared experimentally and characterised by atomic force microscopy and UV-vis spectroscopy. The simulations match the experimental phase behaviour of P3HT in anisole, showing aggregation of P3HT at 293 and 308 K but not at 323 or 353 K. Single-chain simulations at 293 K reveal two distinct nano-scale aggregate morphologies: hairpins and helices. Hairpin aggregates, which are the precursors of nanofibres, are slightly favoured energetically at 293 K for nuclei of the critical size of ≈80 monomers for aggregation. Consequently, chains in multi-chain aggregates adopt the hairpin morphology exclusively in simulations at experimental concentrations at 293 K. The simulated aggregate sizes match experimentally measured nanofibre widths. An estimate of the shift in UV-vis absorption of P3HT due to the change in conjugation length with aggregation in the simulations agrees reasonably well with experiment and shows that most of the spectral red shift that occurs with nanofibre formation is due to increased planarisation of the P3HT chains. In addition to providing insight into the mechanisms of nanofibre formation, the simulations resolve details of the molecular-level organisation of chains in P3HT nanofibres hitherto inaccessible by experiment.

Excited-State Intramolecular Hydrogen Atom Transfer and Solvation Dynamics of the Medicinal Pigment Curcumin

The potential use of the naturally occurring yellow-orange pigment curcumin as a photodynamic therapy agent is one of the most exciting applications of this medicinal compound. Although subnanosecond spectroscopy has been used to investigate the photophysical processes of curcumin, the time resolution is insufficient to detect important and faster photoinduced processes, including solvation and excited-state intramolecular hydrogen atom transfer (ESIHT). In this study, the excited-state photophysics of curcumin is studied by means of ultrafast fluorescence upconversion spectroscopy. The results show two decay components in the excited-state kinetics with time scales of 12-20 ps and approximately 100 ps in methanol and ethylene glycol. The resulting prominent isotope effect in the long component upon deuteration indicates that curcumin undergoes ESIHT in these solvents. The short component (12-20 ps) is insensitive to deuteration, and multiwavelength fluorescence upconversion results show that this decay component is due to solvation of excited-state curcumin.

Vibrational coherence probes the mechanism of ultrafast electron transfer in polymer–fullerene blends

The conversion of photoexcitations into charge carriers in organic solar cells is facilitated by the dissociation of excitons at the donor/acceptor interface. The ultrafast timescale of charge separation demands sophisticated theoretical models and raises questions about the role of coherence in the charge-transfer mechanism. Here, we apply two-dimensional electronic spectroscopy to study the electron transfer process in poly(3-hexylthiophene)/PCBM (P3HT/PCBM) blends. We report dynamics maps showing the pathways of charge transfer that clearly expose the significance of hot electron transfer. During this ultrafast electron transfer, vibrational coherence is directly transferred from the P3HT exciton to the P3HT hole polaron in the crystalline domain. This result reveals that the exciton converts to a hole with a similar spatial extent on a timescale far exceeding other photophysical dynamics including vibrational relaxation.

Excited-State Intramolecular Hydrogen Atom Transfer of Curcumin in Surfactant Micelles

Femtosecond fluorescence upconversion experiments were performed on the naturally occurring medicinal pigment, curcumin, in anionic, cationic, and neutral micelles. In our studies, the micelles are composed of sodium dodecyl sulfate (SDS), dodecyl trimethyl ammonium bromide (DTAB), and triton X-100 (TX-100). We demonstrate that the excited-state kinetics of curcumin in micelles have a fast (3-8 ps) and slow (50-80 ps) component. While deuteration of curcumin has a negligible effect on the fast component, the slow component exhibits a pronounced isotope effect of approximately 1.6, indicating that micelle-captured curcumin undergoes excited-state intramolecular hydrogen atom transfer. Studies of solvation dynamics of curcumin in a 10 ps time window reveal a fast component (< or = 300 fs) followed by a 8, 6, and 3 ps component in the solvation correlation function for the TX-100, DTAB, and SDS micelles, respectively.

Chemical Defects in the Highly Fluorescent Conjugated Polymer Dots

We present strong evidence for the oxidation of conjugated polymers in the formation of conjugated polymer dots (CPdots) using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Although recent studies show that folding of the polymer chain into a compact 3D structure is involved in the formation of these nanoparticles, the process by which these intrinsically hydrophobic nanoscale particles circumvent aggregation in water is still not well understood. Zeta potential results show that these dots have a negatively charged surface at neutral pH, with a zeta potential and surface charge density of approximately -40 mV and (1.39 - 1.70) × 10(-2) C/m(2), respectively. In addition, quantitative elemental analysis of CPdots indicates that oxygen composes 7-13% of these nanoparticles. The overall results support the presence of chemical defects in forming a hydrophilic surface of CPdots. As a consequence, the charged surface contributes to inhibiting the aggregation of CPdots in water, leading to colloidal stability.