Tatiana G. Levitskaia

Calix[4]pyrrole: A New Ion-Pair Receptor As Demonstrated by Liquid-Liquid Extraction

Solvent-extraction studies provide confirming evidence that meso-octamethylcalix[4]pyrrole acts as an ion-pair receptor for cesium chloride and cesium bromide in nitrobenzene solution. The stoichiometry of the interaction under extraction conditions from water to nitrobenzene was determined from plots of the cesium distribution ratios vs cesium salt and receptor concentration, indicating the formation of an ion-paired 1:1:1 cesium:calix[4]pyrrole:halide complex. The extraction results were modeled to evaluate the equilibria inherent to the solvent-extraction system, with either chloride or bromide. The binding energy between the halide anion and the calix[4]pyrrole was found to be about 7 kJ/mol larger for cesium chloride than for the cesium bromide. The ion-pairing free energies between the calix[4]pyrrole-halide complex and the cesium cation are nearly the same within experimental uncertainty for either halide, consistent with a structural model in which the Cs+ cation resides in the calix bowl. These results are unexpected since nitrobenzene is a polar solvent that generally leads to dissociated complexes in the organic phase when used as a diluent in extraction studies of univalent ions. Control studies involving nitrate revealed no evidence of ion pairing for CsNO3 under conditions identical to those where it is observed for CsCl and CsBr.

Spectroscopic Monitoring of Spent Nuclear Fuel Reprocessing Streams: An Evaluation of Spent Fuel Solutions via Raman, Visible, and Near-Infrared Spectroscopy

Abstract The potential of using optical spectroscopic techniques, such as Raman and visible/near infrared (Vis/NIR), for on-line process control and special nuclear materials accountability applications at a spent nuclear fuel reprocessing facility was evaluated. The availability of on-line, real-time techniques that directly measure process concentrations of nuclear materials will enhance the performance and proliferation resistance of the solvent extraction processes. Further, on-line monitoring of radiochemical streams will also improve reprocessing plant operation and safety. This paper reviews the current state of development of the spectroscopic on-line monitoring techniques for such solutions. To further examine the applicability of optical spectroscopy for this application, segments of a spent nuclear fuel, with approximate burn-up values of 70 MW d/kg M, were dissolved in concentrated nitric acid and adjusted to varying final concentrations of HNO3. The resulting spent fuel solutions were batch-contacted with tributyl phosphate/n-dodecane organic solvent. The feed and equilibrium aqueous and loaded organic solutions were subjected to optical measurements. The obtained spectra showed the presence of quantifiable Raman bands due to NO3− and UO22+ and Vis/NIR bands due to multiple species of Pu(IV), Pu(VI), Np(V), the Np(V)-U(VI) cation–cation complex, and Nd(III) in fuel solutions. This result justifies spectroscopic techniques as a promising methodology for monitoring spent fuel processing solutions in real-time. The fuel solution was quantitatively evaluated based on spectroscopic measurements and was compared to inductively coupled plasma-mass spectroscopy analysis and Oak Ridge Isotope Generator (ORIGEN)-based estimates.

Selective carrier-mediated cesium transport through polymer inclusion membranes by calix[4]arene-crown-6 carriers from complex aqueous mixtures

Summary Competitive Cs+ ion transport by polymer inclusion membranes (PIMs) with bis(dodecyloxy)calix[4]arene-crown-6 or calix[4]arene-biscrown-6 was investigated under various conditions. The PIM matrix consisted of cellulose triacetate and ortho-nitrophenyloctyl ether. Special attention was paid to PIM performance employing complex source-phase mixtures, including simulant solutions of acidic nuclear wastes present at Idaho National Engineering and Environmental Laboratory. PIMs exhibited highly efficient and selective Cs+ transport under competitive conditions. Membranes containing calix-monocrown carrier exhibited slightly less efficient but more selective Cs+ transport than those with calix-biscrown carrier. PIMs with bis(dodecyloxy)calix[4]arene-crown-6 exhibited excellent stability in terms of carrier loss to the aqueous phase. The variation of cesium transport with composition of aqueous phase was adequately described by a diffusion-limited transport model.

Electrochemistry and Spectroelectrochemistry of europium(III) chloride in 3LiCl-2KCl from 643 to 1123 K.

The electrochemical and spectroelectrochemical behavior of europium(III) chloride in a molten salt eutectic, 3LiCl-2KCl, over a temperature range of 643-1123 K using differential pulse voltammetry, cyclic voltammetry, potential step chronoabsorptometry, and thin-layer spectroelectrochemistry is reported. The electrochemical reaction was determined to be the one-electron reduction of Eu(3+) to Eu(2+) at all temperatures. The redox potential of Eu(3+/2+) shifts to more positive potentials, and the diffusion coefficient for Eu(3+) increases as temperature increases. The results for the number of electrons transferred, redox potential, and diffusion coefficient are in good agreement between the electrochemical and spectroelectrochemical techniques. This research extends our ability to develop a spectroelectrochemical sensor for lanthanides and actinides into molten salt media.

An Advanced TALSPEAK Concept Using 2-Ethylhexylphosphonic Acid Mono-2-Ethylhexyl Ester as the Extractant

A method for separating the trivalent actinides and lanthanides is being developed using 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) as the extractant. The method is based on the preferential binding of the actinides in the aqueous phase by N-(2-hydroxyethyl)ethylenediamine-N,N’,N’-triacetic acid (HEDTA), which serves to keep the actinides in the aqueous phase while the lanthanides are extracted into an organic phase containing HEH[EHP]. The process is very robust, showing little dependence upon the pH or the HEH[EHP], HEDTA, and citrate concentrations over the ranges that might be expected in a nuclear fuel recycling plant. Single-stage runs with a 2-cm centrifugal contactor indicate that modifications to the process chemistry may be needed to increase the extraction rate for Sm, Eu, and Gd. The hydraulic properties of the system are favorable to application in centrifugal contactors.

Water O–H Stretching Raman Signature for Strong Acid Monitoring via Multivariate Analysis

A distinct need exists for real time information on an acid concentration of industrial aqueous streams. Acid strength affects efficiency and selectivity of many separation processes, including nuclear fuel reprocessing. Despite the seeming simplicity of the problem, no practical solution has been offered yet, particularly for the large-scale schemes involving toxic streams such as highly radioactive nuclear wastes. The classic potentiometric technique is not amiable for online measurements due to the requirements of frequent calibration/maintenance and poor long-term stability in aggressive chemical and radiation environments. Therefore, an alternative analytical method is needed. In this work, the potential of using Raman spectroscopic measurements for online monitoring of strong acid concentration in solutions relevant to dissolved used nuclear fuel was investigated. The Raman water signature was monitored for solution systems containing nitric and hydrochloric acids and their sodium salts of systematically varied composition, ionic strength, and temperature. The trivalent neodymium ion simulated the presence of multivalent f metals. The gaussian deconvolution analysis was used to interpret observed effects of the solution nature on the Raman water O-H stretching spectrum. The generated Raman spectroscopic database was used to develop predictive multivariate regression models for the quantification of the acid and other solution components, as well as selected physicochemical properties. This method was validated using independent experiments conducted in a flow solvent extraction system.

Lipophilic ternary complexes in liquid–liquid extraction of trivalent lanthanides

The formation of ternary complexes between lanthanide ions [Nd(III) or Eu(III)], octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide (CMPO), and bis-(2-ethylhexyl)phosphoric acid (HDEHP) was probed by liquid–liquid extraction and spectroscopic techniques. Equilibrium modeling of data for the extraction of Nd(III) or Eu(III) from lactic acid media into n-dodecane solutions of CMPO and HDEHP indicates the predominant extracted species are of the type [Ln(AHA)2(A)] and [Ln(CMPO)(AHA)2(A)], where Ln = Nd or Eu and A represents the DEHP− anion. FTIR (for both Eu and Nd) and visible spectrophotometry (in the case of Nd) indicate the formation of the [Ln(CMPO)(A)3] complexes when CMPO is added to n-dodecane solutions of the LnA3 compounds. Both techniques indicate a stronger propensity of CMPO to complex Nd(III) versus Eu(III).

Fluorinated calixpyrroles: anion-binding extractants that reduce the Hofmeister bias

Beta-octafluoro-meso-octamethylcalix[4]pyrrole (1) and beta-decafluoro-meso-decamethylcalix[5]pyrrole (2) were found to extract caesium salts of smaller anions (bromide and chloride for 1 and nitrate for 2) as effectively as that of iodide into nitrobenzene (NB) thereby overcoming the Hofmeister bias normally observed for processes of this type.

Development of Online Spectroscopic pH Monitoring for Nuclear Fuel Reprocessing Plants: Weak Acid Schemes.

In nuclear fuel reprocessing, separating trivalent minor actinides and lanthanide fission products is extremely challenging and often necessitates tight pH control in TALSPEAK (Trivalent Actinide-Lanthanide Separation by Phosphorus reagent Extraction from Aqueous Komplexes) separations. In TALSPEAK and similar advanced processes, aqueous pH is one of the most important factors governing the partitioning of lanthanides and actinides between an aqueous phase containing a polyaminopolycarboxylate complexing agent and a weak carboxylic acid buffer and an organic phase containing an acidic organophosphorus extractant. Real-time pH monitoring would significantly increase confidence in the separation performance. Our research is focused on developing a general method for online determination of the pH of aqueous solutions through chemometric analysis of Raman spectra. Spectroscopic process-monitoring capabilities, incorporated in a counter-current centrifugal contactor bank, provide a pathway for online, real-time measurement of solution pH. The spectroscopic techniques are process-friendly and can be easily configured for online applications, whereas classic potentiometric pH measurements require frequent calibration/maintenance and have poor long-term stability in aggressive chemical and radiation environments. Raman spectroscopy discriminates between the protonated and deprotonated forms of the carboxylic acid buffer, and the chemometric processing of the Raman spectral data with PLS (partial least-squares) regression provides a means to quantify their respective abundances and therefore determine the solution pH. Interpretive quantitative models have been developed and validated under a range of chemical composition and pH conditions using a lactic acid/lactate buffer system. The developed model was applied to new spectra obtained from online spectral measurements during a solvent extraction experiment using a counter-current centrifugal contactor bank. The model predicted the pH of this validation data set within 11% for pH > 2, thus demonstrating that this technique could provide the capability of monitoring pH online in applications such as nuclear fuel reprocessing.

Aminothiol Receptors for Decorporation of Intravenously Administered 60Co in the Rat

This report provides a comparison of the oral decorporation efficacy of L-glutathione (GSH), L-cysteine (Cys), and a liposomal GSH formulation (ReadiSorb) toward systemic 60Co to that observed following intravenous administration of GSH and Cys in F344 rats. Aminoacid L-histidine (His) containing no thiol functionality was tested intravenously to compare in vivo efficacy of the aminothiol (GSH, Cys) chelators with that of the aminoimidazole (His) chelator. In these studies, 60Co was administered to animals by intravenous injection, followed by intravenous or oral gavage doses of a chelator repeated at 24-h intervals for a total of 5 doses. The results suggest that GSH and Cys are potent decorporation agents for 60Co in the rat model, although the efficacy of treatment depends largely on the systemic availability of the chelator. The intravenous route of administration of GSH or Cys was most effective in reducing tissue 60Co levels and in increasing excretion of radioactivity compared to control animals. Liposomal encapsulation was found to markedly enhance the oral bioavailability of GSH compared to non-formulated GSH. The oral administration of liposomal GSH reduced 60Co levels in nearly all tissues by 12–43% compared to that observed for non-formulated GSH. Efficacy of oral Cys was only slightly reduced in comparison with intravenous Cys. Further studies to optimize the dosing regimen in order to maximize decorporation efficiency are warranted.