Teguh Putranto

Wave Load Analysis of the Corvette Ship in the Sea Water of Indonesia

Wave load prediction of ship should be considered in the design stage of ship’s construction. The excessive of wave load might cause a structural failure of ship during operational in seaway. The bending moment might be experienced on the ship structure that it contributes to stress concentration on the particular part of construction. This paper describes the prediction of bending moment and shear forces of the warship corvette type considered to the sea condition of Indonesia. The 3D diffraction theory was adopted to analyze ship’s motion responses, bending moments, and shear forces numerically. In this numerical simulation, the variations of speed and heading angle of ship were performed with respect to environmental condition of sea state 4, 5, 6 and 7. The simulation results had shown that the maximum shear force and bending moment was occurred on the area of mid-ship.

Resistance and Stability Analysis for Catamaran Fishing Vessel with Solar Cell in Calm Water

Pump shafts are generally exposed to the liquid being pumped either on a continual basis or at certain locations along the length of the shaft. The shaft material is austenitic stainless steel, description ASTM AU 79 TY 316. The purpose of this study is to determine the failure of the water pump shaft used in the power plant. Metallography is the study of structure metal shaft can used as a means for CWP metal pelleting (Circulating Water Pump), for the purpose of damaged or deeply degraded areas. SEM test is used to know the beginning of the crack (crack initiation). EDS test is used to chemical composition and Vikers hardness test is also used to know the hardness material. These three tests to support in analyzing the failure of the pump shaft. The conclusion of this failure analysis is the shaft material has porosity. Fatigue cracking comes from the outer surface area.