Thais Maria Freire Fernandes

Comparison of manual, digital and lateral CBCT cephalometric analyses

Objective: The aim of this study was to compare the reliability of three different methods of cephalometric analysis. Material and Methods: Conventional pretreatment lateral cephalograms and cone beam computed tomography (CBCT) scans from 50 subjects from a radiological clinic were selected in order to test the three methods: manual tracings (MT), digitized lateral cephalograms (DLC), and lateral cephalograms from CBCT (LC-CBCT). The lateral cephalograms were manually analyzed through the Dolphin Imaging 11.0(tm) software. Twenty measurements were performed under the same conditions, and retraced after a 30-day period. Paired t tests and the Dahlberg formula were used to evaluate the intra-examiner errors. The Pearsons correlation coefficient and one-way analysis of variance (ANOVA) tests were used to compare the differences between the methods. Results: Intra-examiner reliability occurred for all methods for most of the measurements. Only six measurements were different between the methods and an agreement was observed in the analyses among the 3 methods. Conclusions: The results demonstrated that all evaluated methodologies are reliable and valid for scientific research, however, the method used in the lateral cephalograms from the CBCT proved the most reliable.

Comparison between 3D volumetric rendering and multiplanar slices on the reliability of linear measurements on CBCT images: an in vitro study.

Objective The purpose of this study was to determine the accuracy and reliability of two methods of measurements of linear distances (multiplanar 2D and tridimensional reconstruction 3D) obtained from cone-beam computed tomography (CBCT) with different voxel sizes. Material and Methods Ten dry human mandibles were scanned at voxel sizes of 0.2 and 0.4 mm. Craniometric anatomical landmarks were identified twice by two independent operators on the multiplanar reconstructed and on volume rendering images that were generated by the software Dolphin®. Subsequently, physical measurements were performed using a digital caliper. Analysis of variance (ANOVA), intraclass correlation coefficient (ICC) and Bland-Altman were used for evaluating accuracy and reliability (p<0.05). Results Excellent intraobserver reliability and good to high precision interobserver reliability values were found for linear measurements from CBCT 3D and multiplanar images. Measurements performed on multiplanar reconstructed images were more accurate than measurements in volume rendering compared with the gold standard. No statistically significant difference was found between voxel protocols, independently of the measurement method. Conclusions Linear measurements on multiplanar images of 0.2 and 0.4 voxel are reliable and accurate when compared with direct caliper measurements. Caution should be taken in the volume rendering measurements, because the measurements were reliable, but not accurate for all variables. An increased voxel resolution did not result in greater accuracy of mandible measurements and would potentially provide increased patient radiation exposure.

Comparison of mesiodistal tooth widths in Caucasian, African and Japanese individuals with Brazilian ancestry and normal occlusion.

OBJECTIVE To observe the presence of sexual dimorphism and compare the mesiodistal width of the teeth in Caucasian, African and Japanese individuals with Brazilian ancestry not orthodontically treated and with normal occlusion. METHODS One hundred pairs of dental casts were used. It was measured, from first molar to first molar in both arches, the teeths mesiodistal widths, using a digital caliper. For the statistical analysis of results Kolmogorov-Smirnov, t test, ANOVA and Tukeys test (p < 0.05) were used. RESULTS Sexual dimorphism occurred on the three evaluated groups, and the highest mesiodistal widths were found in males. There was statistically significant difference between racial groups in all evaluated teeth in males. However, in females, this same difference was found only on upper lateral incisor and first molar; and lower lateral incisor, canine, first premolar and first molar. CONCLUSIONS Most of mesiodistal measures present particular characteristics in relation to gender, with higher values for males, and to race, with a tendency for African to present greater mesiodistal distance of the teeth, followed by Japanese and Caucasians, respectively, important for the correct diagnosis and orthodontic planning.

Dentoskeletal effects produced by removable palatal crib, bonded spurs, and chincup therapy in growing children with anterior open bite

OBJECTIVE To evaluate the dentoskeletal effects of different anterior open bite treatment modalities in children. MATERIALS AND METHODS This cephalometric study assessed changes resulting from different treatment approaches on 77 growing children with anterior open bite. A control group (n = 30) was used for comparison. Lateral cephalograms were available before treatment and after 12 months. The sample was divided into four groups: removable palatal crib associated with a chincup (G1), bonded spurs associated with a chincup (G2), chincup (G3), and nontreated control (G4). Statistical comparisons among the four groups were performed on T1 and the treatment changes using analysis of variance with Tukeys post hoc tests. RESULTS No statistically significant changes in skeletal variables were found among the groups, except for lower anterior face height (LAFH) increase in G1. Overall, effects in all of the treated groups were exclusively dentoalveolar. A larger overbite (OB) increase was observed in G1 and G2 when compared with G3 and G4. The maxillary incisors in G1 showed increased palatal tipping, retrusion, and more vertical dentoalveolar development as well as increased lingual tipping among mandibular incisors. There was less vertical development of maxillary and mandibular molars in G3. CONCLUSIONS A removable palatal crib provided an improvement in OB (97.5%), followed by the bonded spurs (84.5%). Conversely, the chincup-only group did not have positive OB effects.

Dimensional changes of dental arches produced by fixed and removable palatal cribs: A prospective, randomized, controlled study

OBJECTIVE To evaluate the dimensional changes of dental arches on digital models of open bite treatment with fixed and removable palatal cribs. MATERIALS AND METHODS The sample comprised 41 patients of both sexes who were white, aged 7-10 years, and who had mixed dentition, Angle Class I molar relationship, and a negative overbite of at least 1 mm. The sample was randomly divided into two groups: G1, fixed palatal crib; and G2, removable palatal crib. Cast models, obtained initially (T1) and after 1 year of treatment (T2), were scanned by a three-dimensional (3D) scanner, 3Shape R700, producing a 3D image. Measurements were performed by a calibrated examiner using OrthoAnalyzer™ 3D software. RESULTS At T2-T1, differences were observed between the groups regarding vertical dentoalveolar development and overjet. There was more mandibular incisor extrusion for G1 (-1.66 mm) than for G2 (-0.54 mm). An overjet increase was observed in G1 (0.56 mm), in contrast to a reduction in G2 (-0.40 mm). There was a similar overbite increase for both groups (3.51 mm for fixed palatal crib and 3.88 mm for removable palatal crib). CONCLUSIONS Both the treatment protocols are similarly effective for anterior open bite correction, providing an overbite increase with dentoalveolar arch changes, especially in the anterior region.

Can Bone Thickness and Inter-Radicular Space Affect Miniscrew Placement in Posterior Mandibular Sites?

PURPOSE The proper angle of miniscrew insertion is important for cortical anchorage, patient safety, and biomechanical control. The purposes of this study are to report the alveolar process thickness and inter-radicular space in the posterior region of the mandible, to assess the impact of different miniscrew insertion angle protocols, and to identify differences between the genders or types of malocclusion. MATERIALS AND METHODS In this retrospective study, 100 individuals were selected for orthodontic treatment at a radiology clinic. Cone-beam computed tomography data were imported into 3-dimensional software. The predictor variable was the location in the mandible and insertion angle. The demographic variables collected included age, gender, and malocclusion (Angle Classes I and II). The primary outcome variables were bone thickness and inter-radicular space. The inter-radicular spaces were evaluated 5 mm from the cement-enamel junction. The bone thicknesses were taken at 45°, 60°, and 90° in relation to the alveolar ridge, simulating a miniscrew insertion. These factors were evaluated for sexual dimorphism and malocclusion (Angle Classes I and II). Sexual dimorphism and malocclusion were evaluated with t tests. To compare the inter-radicular space and the thickness of bone between areas, an analysis of variance for repeated measures was used. RESULTS The sample was composed of 100 patients with a mean age of 17.4 ± 6.74 years. There were 61 female and 39 male patients and 60 Class I and 40 Class II molar relationships. The inter-radicular space ranged from 2.46 to 3.31 mm, and alveolar bone thickness ranged from 8.01 to 13.77 mm. The thickness tended to decrease with the increase in insertion angle from 45° to 90°. No significant differences between the genders or types of malocclusion were found. CONCLUSIONS The results of this study suggest that the safest areas for the placement of miniscrews are between the first and second premolars and between the first and second molars, regardless of the angle of insertion.

Using UV light for adhesive remnant removal after debonding of orthodontic accessories

The objective of this study was to assess the effect of a UV light-based auxiliary illumination on adhesive remnant (AR) removal after orthodontic debonding. Sixty human molars were divided according to the adhesive used for bonding: O-opaque; LF-low fluorescence; and HF-high fluorescence. After debonding, the teeth were subdivided according to the AR removal method: No UV light or With UV light. After AR removal, the teeth were polished. Direct visual analysis, scanning electron microscopy (SEM) and time quantification for AR removal analyses were performed (Fisher-Freeman-Halton, Fishers exact, chi-square trend, ANOVA, and independent t-tests; α = 5%). Concerning the adhesives, there was no significant difference among direct visual, SEM and time analyses for AR removal (p ≥ 0.05). Regarding AR removal methods, a similarity among the subgroups was verified for direct visual and SEM analyses (p≥0.05). However, a significant trend was verified for the with UV light method to produce greater marks, and the no UV light method, to produce a greater rate of samples with AR before polishing (p = 0.015). AR removal with light was significantly quicker in comparison with the no UV light method (p < 0.0001). The use of UV light may aid orthodontists in removing AR more thoroughly and in less time. However, they should receive special training to apply this technology, and should never dismiss the final polishing procedure.

Dentoalveolar effects produced by different appliances on early treatment of anterior open bite:: A randomized clinical trial

OBJECTIVES: To compare different appliances for early anterior open bite (AOB) correction. MATERIALS AND METHODS: This was a parallel, randomized clinical trial. A prospective sample of patients with AOB was recruited consecutively. Eligibility criteria included angle class I malocclusion with AOB equal to or greater than 1 mm. Participants were allocated by simple randomization to 4 groups: bonded spurs, chin cup, fixed palatal crib, and removable palatal crib. Dentoalveolar changes among the groups were assessed by blinded observers by comparing lateral cephalograms taken before (T1) and 12 months after treatment (T2; analysis of variance followed by Tukey test). Of the measurements, 30% were reassessed for reliability (intraclass correlation coefficient and Bland-Altman agreement test; α = 5%; 95% confidence interval). RESULTS: A total of 99 patients with a mean AOB of 3.7 mm (mean age 8.4 ± 0.8 years, both genders) were recruited. Dropouts occurred in all the groups, yielding a final sample size of 81 analyzed individuals. Intergroup comparisons of differences (T2-T1) showed significant differences for the incisor positioning variables (1.1, 1-PP, 6-PP, IMPA, 1.NB and 1-GoMe). However, there was no significant difference in AOB reduction among the groups, with an average correction of 3.1 mm. CONCLUSIONS: All of the tested devices promoted dental changes, especially in the anterior region, and contributed to AOB reduction during the study period. However, fixed palatal crib demonstrated greater impact on the positioning of the incisors.

A comparative study of the effect of the intrusion arch and straight wire mechanics on incisor root resorption: A randomized, controlled trial

OBJECTIVE To analyze and compare external apical root resorption (EARR) of maxillary incisors treated by intrusion arch or continuous archwire mechanics. MATERIALS AND METHODS This cone-beam computed tomography (CBCT) study analyzed 28 deep bite patients in the permanent dentition who were randomly divided into two groups: Group 1, 12 patients with initial mean age of 15.1 ± 1.6 years and mean overbite of 4.6 ± 1.2 mm treated with the Connecticut intrusion arch (CIA) in the upper arch (Ortho Organizers, Carlsbad, Calif) for a mean period of 5.8 ± 1.27 months. Group 2, 16 patients with initial mean age of 22.1 ± 5.7 years and mean overbite of 4.1 ± 1.1 mm treated with conventional leveling and alignment using continuous archwire mechanics for 6.1 ± 0.81 months. The degree of EARR was detected in 112 maxillary incisors by using CBCT scans and a three-dimensional program (Dolphin 11.7, Dolphin Imaging & Management Solutions, Chatsworth, Calif). The CBCT scans were obtained before (T1) and 6 months after initiation of treatment (T2). Differences between and within groups were assessed by nonpaired and paired t-tests, respectively, with a 5% significance level. RESULTS Significant differences were found for both groups between T1 and T2 ( P < .05) indicating that EARR occurred in both groups. However, there were no significant differences when EARR was compared between group 1 (-0.76 mm) and group 2 (-0.59 mm). CONCLUSIONS The Connecticut intrusion arch did not lead to greater EARR of maxillary incisors when compared with conventional orthodontic mechanics.

Uso do questionário Lower Extremity Functional Scale (LEFS‐Brasil) em comparação com o Índice Algofuncional de Lequesne para definição de gravidade na osteoartrite de joelho e quadril

Osteoarthritis (OA) is a chronic joint disease with a high prevalence in the elderly.1 OA affects more often the hip and knee, compromising important aspects in activities of daily living such as walking, transposition of obstacles, home care and work activities.2 Several questionnaires have emerged to evaluate the functional capacity of patients with OA, which stand out by their simplicity and the ability to evaluate the perception of the