Tian Luo

Formation of Controllable Hydrophilic/Hydrophobic Drug Delivery Systems by Electrospinning of Vesicles

Novel multifunctional poly(ethylene oxide) (PEO) nanofibrous membrane, which contains vesicles constructed by mixed surfactant cetyltrimethylammonium bromide (CTAB)/sodium dodecylbenzenesulfonate (SDBS), has been designed as dual drug-delivery system and fabricated via the electrospinning process. 5-FU and paeonolum, which are hydrophilic and hydrophobic anticancer model drugs, can be dissolved in vesicle solutions bond water and lipid bilayer membranes, respectively. The physicochemical properties of the electrospun nanofibrous membrane were systematically studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), and X-ray diffraction (XRD). Drug release behaviors of the electrospun nanofibrous membrane fabricated with different molar ratio of CTAB/SDBS vesicle solution were investigated. The result showed that the releasing amount of hydrophilic drug presented an ascending release manner, while the hydrophobic one showed a descending release behavior with increasing of the molar ratio of CTAB/SDBS. Moreover, the release amount of drugs from drug delivery system can be controlled by the molar ratio of CTAB/SDBS in the vesicle solution easily and conveniently. The distinct properties can be utilized to encapsulate environmental demanding and quantificational materials.

High-internal-phase emulsions stabilized by metal-organic frameworks and derivation of ultralight metal-organic aerogels

To design high-internal-phase emulsion (HIPE) systems is of great interest from the viewpoints of both fundamental researches and practical applications. Here we demonstrate for the first time the utilization of metal-organic framework (MOF) for HIPE formation. By stirring the mixture of water, oil and MOF at room temperature, the HIPE stabilized by the assembly of MOF nanocrystals at oil-water interface could be formed. The MOF-stabilized HIPE provides a novel route to produce highly porous metal-organic aerogel (MOA) monolith. After removing the liquids from the MOF-stabilized HIPE, the ultralight MOA with density as low as 0.01 g·cm−3 was obtained. The HIPE approach for MOA formation has unique advantages and is versatile in producing different kinds of ultralight MOAs with tunable porosities and structures.

Cellular graphene aerogel combines ultralow weight and high mechanical strength: A highly efficient reactor for catalytic hydrogenation.

The construction of three-dimensional graphene aerogels (GAs) is of great importance owing to their outstanding properties for various applications. Up to now, the combination of ultralow weight and super mechanical strength for GA remains a great challenge. Here we demonstrate the fabrication of cellular GAs by a facile, easily controlled and versatile route, i.e. the chemical reduction of graphene oxide assemblies at oil-water interface under a mild condition (70 °C). The GA is ultralight (with density <3 mg cm−3) yet mechanically resilient because the walls of the cell closely pack in a highly ordered manner to maximize mechanical strength. The GA has been utilized as an appealing reactor for catalytic hydrogenation, which exhibited great advantages such as large oil absorption capability, exceptional catalytic activity, ease of product separation and high stability.

Ionic liquid accelerates the crystallization of Zr-based metal–organic frameworks

The Zr-based metal–organic frameworks are generally prepared by solvothermal procedure. To overcome the slow kinetics of nucleation and crystallization of Zr-based metal–organic frameworks is of great interest and challenging. Here, we find that an ionic liquid as solvent can significantly accelerate the formation of Zr-based metal–organic frameworks at room temperature. For example, the reaction time is shortened to 0.5 h in 1-hexyl-3-methylimidazolium chloride for Zr-based metal–organic framework formation, while that in the conventional solvent N,N-dimethylformamide needs at least 120 h. The reaction mechanism was investigated in situ by 1H nuclear magnetic resonance, spectroscopy synchrotron small angle X-ray scattering and X-ray absorption fine structure. This rapid, low-energy, and facile route produces Zr-based metal–organic framework nanoparticles with small particle size, missing-linker defects and large surface area, which can be used as heterogeneous catalysts for Meerwein–Ponndorf–Verley reaction.Crystallization kinetics of metal-organic frameworks in conventional organic solvents are usually very slow. Here, the authors show that an ionic liquid medium accelerates considerably the formation of Zr-based metal-organic frameworks that are active catalysts in the Meerwein-Ponndorf-Verley reaction.

High internal ionic liquid phase emulsion stabilized by metal–organic frameworks

The emulsification of metal-organic frameworks (MOFs) for the two immiscible phases of water and ionic liquid (IL) was investigated for the first time. It was found that Ni-BDC (BDC = 1,4-dicarboxybenzene) can emulsify water and ILs and favor the formation of high internal phase emulsions (HIPEs) under certain experimental conditions. The microstructures of the HIPEs were characterized by confocal laser scanning microscopy using a fluorescent dye Rhodamine B, which proves that the HIPEs are the IL-in-water type. Further results reveal that the HIPE forms during the IL-in-water to water-in-IL emulsion inversion. The possibilities of the HIPE formation by other MOFs (Cu-BDC and Zn-BDC) were explored and the mechanism for HIPE formation was discussed. The MOF-stabilized HIPE was applied to the in situ synthesis of a MOF/polymer composite by HIPE polymerization. The macroporous MOF/polyacrylamide network and MOF/polystyrene microspheres were obtained from the HIPEs, respectively.

Solvent Impedes CO2 Cycloaddition on Metal-Organic Frameworks

The catalytic performance of metal-organic frameworks (MOFs) for the synthesis of cyclic carbonate from carbon dioxide and epoxides has been explored under solvent and solvent-free conditions, respectively. It was found that MOF catalysts have significantly improved catalytic activities in solvent-free CO2 cycloaddition reactions than those in solvent. The mechanism was discussed with regard to the competition of solvent with substrate to adhere MOF catalysts during the reaction process.

CO2/Water Emulsions Stabilized by Partially Reduced Graphene Oxide

Using functional materials to stabilize emulsions of carbon dioxide (CO2) and water is a promising way to expand the utility of CO2 and functional materials. Here we demonstrate for the first time that the partially reduced graphene oxide (rGO) can well stabilize the emulsion of CO2 and water without the aid of any additional emulsifier or surface modification for rGO. More interestingly, such a novel kind of emulsion provides a facile and versatile route for constructing highly porous three-dimensional rGO materials, including rGO, metal/rGO, and metal oxide/rGO networks. The as-synthesized Au/rGO composite is highly active in catalyzing 4-nitrophenol reduction and styrene epoxidation.

Water‐in‐Supercritical CO2 Microemulsion Stabilized by a Metal Complex

Herein we propose for the first time the utilization of a metal complex for forming water-in-supercritical CO2 (scCO2 ) microemulsions. The water solubility in the metal-complex-stabilized microemulsion is significantly improved compared with the conventional water-in-scCO2 microemulsions stabilized by hydrocarbons. Such a microemulsion provides a promising route for the in situ CO2 reduction catalyzed by a metal complex at the water/scCO2 interface.

Ultrathin and Porous Carbon Nanosheet Supporting Bimetallic Nanoparticles for High Performance Electrocatalysis

Developing hybrid carbon materials with unique micro/nanostructured and multicomponent features is of great importance in catalysis, energy storage, and energy conversion. Herein, we demonstrate the formation of a novel kind of hybrid carbon material, that is, bimetallic nanoparticles supported by ultrathin (≈5.5 nm) and porous carbon nanosheets, by the pyrolysis of preformed bimetallic metal–organic framework nanosheets. This hybrid carbon nanostructure combines the advantages of highly exposed nanoparticles that are readily accessible to the reactant, multiple active sites such as metal–metal and metal–nitrogen sites and ultrathin carbon layers, and highly efficient electron transport. Owing to these unique features, the bimetallic carbon nanosheets exhibit excellent electrocatalytic performance for the oxygen reduction reaction.

Carbon dioxide droplets stabilized by g-C3N4

Here we propose the emulsification of CO2 and water with graphitic carbon nitride (g-C3N4), in which the g-C3N4-stabilized CO2 droplets were utilized as “microreactors” for in situ photocatalytic CO2 reduction. The g-C3N4 sheets assembling at the CO2/water interface can serve both as an emulsifier and photocatalyst, which can greatly promote the conversion of CO2 to formic acid.